Abstract:A joint chemical reactor system referred to as an ultrasonic-intensified micro-impinging jetting reactor (UIJR), which possesses the feature of fast micro-mixing, was proposed and has been employed for rapid preparation of FePO4 particles that are amalgamated by nanoscale primary crystals. As one of the important precursors for the fabrication of lithium iron phosphate cathode, the properties of FePO4 nano particles significantly affect the performance of the lithium iron phosphate cathode. Thus, the effects of joint use of impinging stream and ultrasonic irradiation on the formation of mesoporous structure of FePO4 nano precursor particles and the electrochemical properties of amalgamated LiFePO4/C have been investigated. Additionally, the effects of the reactant concentration (C=0.5, 1.0 and 1.5molL−1), and volumetric flow rate (V=17.15, 51.44, and 85.74mLmin−1) on synthesis of FePO4·2H2O nucleus have been studied when the impinging jetting reactor (IJR) and UIJR are to operate in nonsubmerged mode. It was affirmed from the experiments that the FePO4 nano precursor particles prepared using UIJR have well-formed mesoporous structures with the primary crystal size of 44.6nm, an average pore size of 15.2nm, and a specific surface area of 134.54m2g−1 when the reactant concentration and volumetric flow rate are 1.0molL−1 and 85.74mLmin−1 respectively. The amalgamated LiFePO4/C composites can deliver good electrochemical performance with discharge capacities of 156.7mAhg−1 at 0.1C, and exhibit 138.0mAhg−1 after 100 cycles at 0.5C, which is 95.3% of the initial discharge capacity.

Method for preparing lithium iron phosphate by sintering lithium iron phosphate precursor and microwave sintering equipment

Microwave fast solid phase sintering method for cathode material lithium iron phosphate of lithium ionic cell

Preparation method for low-temperature nanometer lithium iron phosphate cathode material

Rapid Preparation of High Electrochemical Performance LiFePO4/C Composite Cathode Material with an Ultrasonic-Intensified Micro-Impinging Jetting Reactor

Preparation method of positive electrode material for lithium-ion battery capable of improving electrochemical properties

A lithium ion battery positive electrode material for lithium phosphate and iron preparation

Preparation method of iron phosphate lithium electrode

Preparation method of carbon-coated lithium iron phosphate with grade structure

Method for preparing high-performance LiVPO4F battery material through secondary carbon source regulation and control

Research on Preparation of Nano-porous Lithium Iron Phosphate for Lithium-ion Battery Electrode Materials

A novel environment-friendly synthesis of high purity micron iron phosphate and its application as a precursor of lithium iron phosphate

Modification method for improving high-temperature cycle performance and ionic conductance of lithium iron phosphate material

Lithium iron phosphate structure and a method of preparing a lithium ion battery, and

Preparation of Lithium Iron Phosphate by Sol-Gel Technique

Biomimetic Synthesis and Characterization of the Positive Electrode Material LiFePO4

Preparation and Characterization of MnFe2O4 by a Microwave-Assisted Oxidative Roasting Process

Preparation and characterization of LiFePO 4 from NH 4 FePO 4 ·H 2 O under different microwave heating conditions

Wet-process phosphoric acid for preparation of iron phosphate and its influence on performance of lithium iron phosphate synthesis

A high performance lithium ion battery positive electrode material of a lithium iron manganese phosphate and preparation method

A method for the preparation of phosphoric acid by the reaction of iron and a battery grade iron phosphate

A preparation method of conductive paste for negative electrode of lithium ion battery