Abstract:Abstract The characteristics and performance of lithium‐ion batteries typically rely on the precise combination of materials in their component electrodes. Understanding the impact of this formulation and the interdependencies between each component is critical in optimising cell performance. Such optimisation is difficult as the cost and effort for the myriad of possible combinations is too high. This problem is addressed by combining a design of experiments (DoE) and advanced statistical machine learning approach with comprehensive experimental characterisation of electrode slurries and coatings. An industry relevant graphite anode system is used, and with the aid of DoE, less than 30 experiments are defined to map impact of different weight fractions of active material (80–96 wt%), conductive additive (Carbon Black at 1–10 wt%) and a two‐component binder system (Carboxymethyl Cellulose (CMC) at 1–3 wt% and Styrene Butadiene Rubber (SBR), at 1–7 wt%). Using Explainable Machine Learning (XML) methods, correlations between the formulation, slurry weight percentage (30–50 wt% in water) and coating speed (1–15 m/min) are quantified. Slurry viscosity, while known to depend on the CMC concentration, is also heavily influenced by carbon black and SBR when at high concentration, as is common in research. Viscosity increasing components also improve adhesion, by improving dispersion and hindering binder migration. Conductivity of the coating on current collector is sensitive to the current collector‐coating interface, which makes it a highly useful probe. Improvements in cell capacity are observed with higher viscosity formulations (High weight percentage, CMC content), attributed to reduction in migration and slumping of the slurry on the current collector. SBR had a negative impact at any concentration due to its insulating nature, and carbon black reduces gravimetric capacity when included at high concentrations. The insights from this study facilitate the formulation optimisation of electrodes providing improved slurry design rules for future high performance electrode manufacturing.

A preparation method of conductive paste for negative electrode of lithium ion battery

Preparation method of positive electrode material for lithium-ion battery capable of improving electrochemical properties

Scalable Process for Application of Stabilized Lithium Metal Powder in Li-ion Batteries

Optimization of slurry stability for lithium ion battery

Coating method for core-shell novel positive electrode material for lithium ion battery

Preparation of cathode slurry for lithium-ion battery by three-roll mill process

Preparation method of multi-stage structured silicon-carbon composite negative electrode material of lithium ion battery

Effects of the mixing sequence on the graphite dispersion and resistance of lithium-ion battery anodes

An Acid-Pasting Strategy Towards PTCDA Based High Performance Lithium/sodium Ion Battery Cathodes

A lithium ion battery positive electrode material and the additive preparation, comprising a positive electrode material and a lithium ion battery of the additive

A lithium ion battery positive electrode material for lithium phosphate and iron preparation

Slurry solvent content influence on electrode preparation, microstructure and performance

Method for manufacturing gel polymer lithium ion battery

Silicon or silicon oxide@titanium oxide core-shell structure composite material and preparation thereof

Effects of conductive additives on the percolation networks and rheological properties of LiMn0.7Fe0.3PO4 suspensions for lithium slurry battery

Preparation method of high-nickel, low-cobalt and low-manganese ternary positive electrode material precursor for lithium battery

Impact of Formulation and Slurry Properties on Lithium‐ion Electrode Manufacturing

Impact of slurry preparation method on the rheological behaviour of dense anode slurries for lithium-ion batteries

Preparation method of iron phosphate lithium electrode

Silicon-carbon composite material, preparation method thereof and negative pole for lithium-ion battery

Effects of dry powder mixing on electrochemical performance of lithium-ion battery electrode using solvent-free dry forming process