Abstract:Over the past decade, the cast aluminum alloys with excellent mechanical and conductivity properties have emerged as potential materials for thermal management. However, the traditional Al-Si based alloys are difficult to make significant breakthroughs in conductivity performance. The hypoeutectic Al-5Ni alloy also possesses sound castability and is expected to be applied in thermal management applications. In this study, the effects of ytterbium (Yb element) at 0.0–0.5 wt% on the microstructures as well as the electrical/thermal conductivity and mechanical properties of the Al-5Ni alloy was systematically investigated. The experimental results indicate that the addition of Yb at a relatively low amount not only reduces the secondary dendrite arm spacing of the α-Al grains, but also modifies the morphology and distribution of eutectic boundary phase. Moreover, it is found that the dosage of Yb at 0.3 wt% in the Al-5Ni alloy can simultaneously improve the yield strength, ultimate tensile strength and electrical/thermal conductivity. The strengthening and toughening of the Al-5Ni alloy are mainly attributed to the decrease of secondary dendrite arm spacing and the improvement of eutectic phases. The TEM/SAED analysis indicates that the ytterbium in Al-5Ni alloy would form Al3Yb phase, which mainly agglomerates in the Al3Ni phase region. This phase is helpful to decrease the solubility of impurity elements (e.g., Fe and Si) in the α-Al matrix, which is beneficial to electrical/thermal conductivity. The value of this study lays foundation for manufacturing Al-Ni alloys with high thermal conductivity and acceptable mechanical properties.The trace addition of Yb not only reduces the second dendrite arm spacing (SDAS) of the α-Al grains, but also modifies the morphology and distribution of eutectic boundary phase, which simultaneously improves the thermal conductivity and mechanical properties of Al-5Ni alloy.Download : Download high-res image (325KB)Download : Download full-size image

Sustainable choices of alloying element for aluminium for thermal conductivity in circular manufacturing

Thermal Conductivity of Aluminum Alloys—A Review

Aluminium-Silicon Lightweight Thermal Management Alloys with Controlled Thermal Expansion

Elucidating thermal conductivity mechanism of Al-9Si based alloys with trace transition elements (Mn, Cr, V)

Tailoring Thermal Conductivity and Microstructure of Al-Fe Alloys by Addition of Sc2O3 and Variable Cooling Rates

Recent advancements in thermal conductivity of magnesium alloys

Achieving High Thermal Conductivity of Al–50Si Alloy Through Heat Treatment and Its Microstructural Evolution

Effect of Alloying Elements on Thermal Conductivity of Aluminum

A Quantitative Study on the Interaction Between Silicon Content and Heat Treatment on Thermal Conductivity of Al-Si Binary Alloys

Effects of Alloying Elements on Thermal Conductivity of Pearlitic Gray Cast Iron

Recent Progress on Thermal Conductivity of Magnesium and Its Alloys

Tailoring thermal conductivity and microstructure of Al–Fe alloys by addition of Sc 2 O 3 and variable cooling rates

Effect of Alloying Elements and Processing Parameters on Microstructure and Properties of 1XXX Aluminium Alloys

Development of Al-25Si-xCe Alloy with High Conductivity and Low Expansivity for Thermal Management Purpose

A review on aluminum alloy conductors influenced by alloying elements and thermomechanical treatments: Microstructure and properties

Effects of Si and Sr elements on solidification microstructure and thermal conductivity of Al–Si-based alloys

Processing of an As-Cast Al-7.5 Wt%y Eutectic Alloy by Rolling and Annealing to Improve the Tradeoff Between Strength and Electrical Conductivity

Alloying Effects on the Transport Properties of Refractory High-entropy Alloys

Effects of trace ytterbium addition on microstructure, mechanical and thermal properties of hypoeutectic Al–5Ni alloy

Alloying Elements Effects on Electrical Conductivity and Mechanical Properties of Newly Fabricated Al Based Alloys Produced by Conventional Casting Process

Thermal Conductivity of AlSi10MnMg Alloy in Relation to Casting Technology and Heat Treatment Method