Tailoring thermal conductivity and microstructure of Al–Fe alloys by addition of Sc 2 O 3 and variable cooling rates

Huan Liu,Yuliang Zhao,Qiuyun Wei,Weixiang He,Dongfu Song,Zhenzhong Sun,Yanan Fu,Fei Xiao,Da Shu

DOI: https://doi.org/10.1016/j.jmrt.2024.08.058

IF: 6.267

2024-08-23

Journal of Materials Research and Technology

Abstract:Al–Fe alloy is a kind of high thermal conductivity alloy, which are widely utilized in the communication and automobile industries. The thermal conductivity is greatly affected by the morphology, size, and distribution of iron-rich intermetallic phases (Fe-rich phases), pores, and Al grains. The evolution of microstructure and thermal conductivity of Al–Fe alloys by adding Sc 2 O 3 particles and adjusting cooling rates are systematically studied by optical and scanning electron microscopy, and synchrotron X-ray imaging. The results show that Sc 2 O 3 addition reduces the size and increases the number of primary Fe-rich phases, while increasing the grain size of Al matrix. The Sc 2 O 3 promote their nucleation of primary Fe-rich phases and partial Sc solutes inhibit their growth, resulting in the improvement of thermal conductivity and mechanical properties. The remaining Sc 2 O 3 particles have large lattice misfit with Al, led to the formation of coarsen size Al. The highest thermal conductivity is 214 W/(m·K) in the alloy with Sc 2 O 3 and slow cooling rate. Sc 2 O 3 addition increase the thermal conductivity of the studied alloys, i.e., an increment of 3 W/(m K) (by 1.1 %) at slow cooling rate by and an increment of 11 W/(m K) (by 6.2 %) at fast cooling rate. This study provides a new strategy to improving thermal conductivity of Al alloy for both academia and industry.

materials science, multidisciplinary,metallurgy & metallurgical engineering