Abstract:To robustly and adaptively reconstruct displacement, we propose the amplitude modulation integral reconstruction method (AM-IRM) for displacement sensing in a self-mixing interferometry (SMI) system. By algebraically multiplying the SMI signal with a high-frequency sinusoidal carrier, the frequency spectrum of the signal is shifted to that of the carrier. This operation overcomes the issue of frequency blurring in low-frequency signals associated with continuous wavelet transform (CWT), enabling the precise extraction of the Doppler frequency of the SMI signal. Furthermore, the synchrosqueezing wavelet transform (SSWT) is utilized to enhance the frequency resolution of the Doppler signal. Our experimental results demonstrate that the proposed method achieves a displacement reconstruction accuracy of 21.1 nm (0.89%). Additionally, our simulations demonstrated that this method can accurately reconstruct target displacement under the conditions of time-varying optical feedback intensity or a signal-to-noise ratio (SNR) of 0 dB, with a maximum root mean square (RMS) error of 22.2 nm. These results highlight its applicability in real-world environments. This method eliminates the need to manually determine the window length for time–frequency conversion, calculate the parameters of the SMI system, or add additional optical devices, making it easy to implement.
engineering, electrical & electronic,instruments & instrumentation,chemistry, analytical
What problem does this paper attempt to address?
This paper aims to solve the problems of accuracy and adaptability in displacement reconstruction in the Self - Mixing Interferometry (SMI) system. Specifically, the paper proposes a method based on Amplitude Modulation and Integral Reconstruction (Amplitude Modulation Integral Reconstruction Method, AM - IRM) to improve the frequency resolution of low - frequency signals and achieve high - precision displacement reconstruction.
### Background of the Paper
In the fields of industrial manufacturing and biomedicine, the demand for non - contact high - precision measurement methods is increasing day by day. Self - Mixing Interferometry (SMI), as an optical interferometry technique, has attracted wide attention due to its compact optical structure, self - alignment ability and measurement accuracy comparable to that of traditional heterodyne interferometry. However, the existing displacement reconstruction methods have some limitations:
1. **Simple methods**: For example, the fringe - counting method, although simple and easy to use, has a resolution limited to half - wavelength (λ/2).
2. **Advanced methods**: Such as the Phase Unwrapping Method (PUM) and the Orthogonal Phase Unwrapping Method (OPUM), although they can improve the measurement accuracy, they require complex parameter estimation and additional optical devices.
3. **Time - frequency spectrum method**: By calculating the Doppler frequency through segmented FFT, although it can achieve a relatively high accuracy (λ/29), it requires manual adjustment of the window length and is not suitable for automatic measurement.
4. **Continuous Wavelet Transform (CWT)**: Although it can adaptively adjust the window length, it has a frequency ambiguity problem in the low - frequency region, resulting in signal reconstruction failure.
### Proposed Method
To solve the above problems, the paper proposes a new method - the Amplitude Modulation Integral Reconstruction Method (AM - IRM). The main steps of this method are as follows:
1. **Amplitude modulation**: By performing algebraic multiplication of the SMI signal with a high - frequency sinusoidal carrier, the frequency spectrum of the signal is shifted to the carrier frequency region, thereby overcoming the frequency ambiguity problem of low - frequency signals.
2. **Synchrosqueezing Wavelet Transform (SSWT)**: Use SSWT to enhance the frequency resolution of the Doppler signal and extract the complete Doppler frequency.
3. **Displacement reconstruction**: Through the Doppler velocity integral reconstruction method, the accurate reconstruction of the target displacement is finally achieved.
### Experimental Results
The experimental results show that the proposed AM - IRM method has the following advantages:
1. **High precision**: In the experiment, this method achieved a displacement reconstruction accuracy of 21.1 nm (0.89%).
2. **Robustness**: When the optical feedback intensity changes over time and the signal - to - noise ratio (SNR) is 0 dB, this method can still accurately reconstruct the target displacement, with a maximum root - mean - square (RMS) error of 22.2 nm.
3. **Easy implementation**: This method does not require manual determination of the window length for time - frequency conversion, nor does it require additional optical devices, which is convenient for practical applications.
### Conclusion
The paper proposes a displacement measurement method (AM - IRM) based on amplitude modulation and integral reconstruction, which effectively solves the frequency ambiguity problem of existing methods in low - frequency signal processing and improves the accuracy and robustness of displacement reconstruction. This method has broad application prospects in the actual environment.