Abstract:The optimal design of microstructure is the key to further improve the properties of particle reinforced metal matrix composites. In this study, in-situ TiB2 and TiC + TiB2 reinforced Cu matrix composites are used as examples to develop the microstructure-based representative volume element models to describe their damage evolution and strengthening mechanisms. The most critical features including size distribution and morphology of the particles as well as the fracture of metal matrix, brittle damage of ceramic particles and traction-separation debonding of the interface were integrated into the modeling. Simulation results show that the model could well predict the performance of the composite and reveal its damage mechanism. When the particle size is normally distributed, the composite exhibits higher strength due to the size effect of different particles, which is more consistent with the experimental result. Both matrix and ceramic particles in mixed-phase particle reinforced metal matrix composites can be subjected to higher stresses, which results in higher strength of (TiC + TiB2)/Cu composites. Additionally, the spherical TiC particles facilitate the relaxation of stress concentration within the composite, resulting in a synergistic enhancement of strength and ductility. Under compression, localized interface damage first appears around the sharp corners of the hexagonal particles and induces crack initiation toward the matrix. These microcracks are interconnected and propagate along the direction of high stress, eventually leading to the failure of the composite. This work provides the basis and new ideas to reveal the failure mechanism of composites and further optimize their configuration design.

Microstructure evolution and mechanical properties of graphene reinforced Ti-6Al-4V matrix composites: Defective vs high-quality graphene

Surface modification and twinning behavior in gradient graphene-based TiC/Ti6Al4V composite

Grain Refinement and Mechanical Enhancement of Titanium Matrix Composites with Nickel-Coated Graphene Nanoflakes: Influence of Particle-Size Mismatch

Microstructure design and mechanical properties of grain-gradient graphene/aluminum composites

Microstructural Evolution in Graphene Nanoplatelets Reinforced Magnesium Matrix Composites Fabricated Through Thixomolding Process

Study on the Microstructure and Properties of Graphene Powder-Reinforced Ti-Al Metal-Intermetallic Laminated Composite

Interface microstructure and strengthening mechanisms of multilayer graphene reinforced titanium alloy matrix nanocomposites with network architectures

Graphene-TiC hybrid reinforced titanium matrix composites with 3D network architecture: Fabrication, microstructure and mechanical properties

Microstructural Evolution and Mechanical Properties of Graphene Oxide-Reinforced Ti6Al4V Matrix Composite Fabricated Using Spark Plasma Sintering

Microstructure and mechanical properties of GNPs and in-situ TiB hybrid reinforced Ti–6Al–4V matrix composites with 3D network architecture

Microstructure and mechanical properties of graphite fiber-reinforced high-purity aluminum matrix composite

Modeling damage evolution of graphene/aluminum composites considering crystal cracking and interface failure

Fabrication, microstructure and mechanical properties of TiAl matrix composite reinforced by submicro/nano-Ti 2 AlC

Microstructure evolution and damage mechanism of layered titanium matrix composites under tensile loading

Mechanical Properties of TC11 Titanium Alloy and Graphene Nanoplatelets/TC11 Composites Prepared by Selective Laser Melting

Micromechanical Modeling of Damage Evolution and Mechanical Behaviors of CF/Al Composites under Transverse and Longitudinal Tensile Loadings.

Balancing the strength and ductility of Ti2AlC/TiAl composite with a bioinspired micro-nano laminated architecture

Microstructure and Properties of Titanium Matrix Composites Synergistically Reinforced by Graphene Oxide and Alloying Elements

Numerical modeling and failure evolution of microstructure-based in-situ TiB2 and TiC+TiB2 reinforced Cu matrix composites

Deformation behavior of graphite and its effect on microstructure and thermal properties of aluminum/graphite composites

Microstructure and Properties of a Graphene Reinforced Cu–Cr–Mg Composite