Orientation control of carbon fibers and enhanced thermal/mechanical properties of hot-extruded carbon fibers/aluminum composites
Li-Fu Yi,Takashi Yamamoto,Tetsuhiko Onda,Zhong-Chun Chen
DOI: https://doi.org/10.1016/j.diamond.2021.108432
IF: 3.806
2021-06-01
Diamond and Related Materials
Abstract:Electroless nickel (Ni)-coated carbon fibers (CFs)/aluminum (Al) composites were prepared by a hot-extrusion process. The effects of Ni-coating and extrusion temperature on microstructure, thermal conductivity (TC), coefficient of thermal expansion (CTE), and compressive strength of CFs/Al composites have been systematically investigated. Microstructural observations showed that the CFs in hot-extruded composites were preferentially oriented along the extrusion direction. The Ni coating on CFs resulted in higher relative density of CFs/Al composites, more homogeneous distributions of CFs in the Al matrix, and stronger interfacial bonding between CFs and Al. As a result, the extruded Ni-coated CFs/Al samples showed higher TC, lower CTE, and higher compressive strength in comparison with uncoated CFs/Al extruded samples and Ni-coated CFs/Al spark plasma sintered (SPSed) samples. For example, the Ni-coated CFs/Al sample extruded at 500 °C showed TC, CTE, and compressive strength values of 227 W m−1 K−1, 7.32 ppm K−1, and 113 MPa, respectively, which correspond to 18%, −22%, and 38% enhancements compared to the SPSed sample.
materials science, multidisciplinary,physics, applied, condensed matter, coatings & films