Abstract:The dimensions of tenons in solid wood furniture significantly influence the mechanical performance of mortise and tenon joints. While previous studies have primarily focused on tenon length, width, and thickness, they often overlooked the impact of clearance between the mortise and tenon. This study investigates the effects of tenon length, tenon width, and clearance on the mechanical performance of mortise and tenon joints, aiming to enhance their bending moment capacity (BMC) and stiffness. A three-factor, three-level orthogonal test was conducted, utilizing range analysis and variance analysis to assess the effects of each factor on BMC and stiffness. The LSD post hoc test was employed to identify significant differences between levels of the same factor, and nonlinear regression analysis was used to fit the experimental results. Based on orthogonal experiment outcomes, a grey relational theory-based evaluation system was developed to assess the comprehensive performance of joints, including both moment capacity and stiffness. Results indicate that tenon length has the most significant effect on BMC, followed by clearance and tenon width, while clearance has the greatest impact on stiffness, followed by tenon length and tenon width. These findings are consistent with those obtained from grey relational analysis. When considering both BMC and stiffness as a comprehensive evaluation, the optimal combination is a tenon length of 40 mm, a tenon width of 35 mm, and a clearance of −0.1 mm. This study offers valuable insights for the rational design of mortise and tenon joints, contributing to improved performance and reduced manufacturing costs.

Study on withdrawal force capacity of insert nut in wood-based materials used for case furniture

Influence of Interference Fit Size on Hole Deformation and Residual Stress in Hi-Lock Bolt Insertion

Crack Propagation And Fracture Process Zone (Fpz) Of Wood In The Longitudinal Direction Determined Using Digital Image Correlation (Dic) Technique

A Mechanistic Predictive Model for Ultrasound Guided Insertion Process of Ø 0.11 Mm Z-pins

Study on the strength mechanism of the wooden round-end mortise-and-tenon joint using the digital image correlation method

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Experimental and Numerical Study on Methods of Testing Withdrawal Resistance of Mortise-and-Tenon Joint for Wood Products

A novel method and validation for obtaining the optimal interference fit of round-end mortise-and-tenon joint

INFLUENCE OF WOOD SCREW SHAPE ON WITHDRAWAL PERFORMANCE IN SOFT AND LIGHT WOOD

Numerical and mechanical research on withdrawal capacity of parallel-to-grain connection part of mortise and loose tenon joint for wooden furniture

Frictional behaviour of wood-Plastic composites against cemented carbide during sliding contact

Experimental investigation on withdrawal resistance performance of nails in southern pine

Experimental study on withdrawal capacity of self-tapping screws in Chinese fir

Investigating the Influence of Tenon Dimensions on White Oak (Quercus alba) Mortise and Tenon Joint Strength

Effects of Milling Methods on Cutting Performance of Wood–Plastic Composites Based on Principal Component Analysis

Experimental and Numerical Study on Withdrawal Strength of Different Types of Auxetic Dowels for Furniture Joints

Machinability of Different Wood-Plastic Composites during Peripheral Milling

Micromechanical properties of wood cell wall and interface compound middle lamella using quasi-static nanoindentation and dynamic modulus mapping

Numerical and theoretical analysis of the contact force of oval mortise and tenon joints concerning outdoor wooden furniture structure

Structural analysis and strength-to-weight optimization of wood-based sandwich composite with honeycomb core under three-point flexural test