Abstract:This study attempts to develop a novel structural nail-laminated panel constructed of engineered bamboo and local fast-grown plantation Chinese fir. An experimental program is reported in this paper on static bending behaviors of such nail-laminated bamboo-timber (NLBT) panel. Twelve NLBT specimens, including five short span specimens without butt joints and seven long span specimens with different butt joints were manufactured and tested. The panel span, species of sawn timber boards, the cross sectional configuration, and reinforcement measures of butt joints were chosen as the experimental parameters in the current investigation. The typical failure mode of the short span NLBT panels exhibited a multiple-fracture process caused by the tension failure of timber layers, while the overall collapse was much delayed or avoided attributed to the residual bending capacity provided by glubam layers. Test results demonstrate that the use of fast-grown Chinese fir instead of imported dimension lumber to combine glubam does not obviously reduce the bending performance of NLBT panels. The proposed vertical nailing reinforcement for butt joints can significantly improve the bending stiffness of the long span NLBT panels, and it is convenient for processing and assembling of NLBT components. Based on the ratio of bamboo and timber, a simple linear relationship is proposed for predicting the elastic modulus of the NLBT through regression analysis. The observed performance evaluation also reveals that the bending performance of the proposed NLBT structural panels is sufficient to meet the design requirements for using as the structural floors in offices and residential buildings. This research provides a feasible and reasonable approach for developing local fast-grown species as structural components.

Experimental investigation on withdrawal resistance performance of nails in southern pine

Bending Performance of Nail-Laminated Bamboo-Timber Panels Made with Glubam and Fast-Grown Plantation Chinese Fir

Experimental study on withdrawal capacity of self-tapping screws in Chinese fir

Experimental Investigation of Laterally Loaded Double-Shear-nail Connections Used in Midply Wood Shear Walls

Experimental Studies of Light-Weight Woodframe Shear Walls with Ply-Bamboo Sheathing Panels

Studies of Nail Connectors Used in Wood Frame Shear Walls with Ply-Bamboo Sheathing Panels

Comparison of nail-holding performance of Pinus massoniana and Cunninghamia lanceolata dimension lumber based on round steel nails

Experimental Investigation on Axial Compression of Resilient Nail-Cross-Laminated Timber Panels

Experimental and Numerical Study on Methods of Testing Withdrawal Resistance of Mortise-and-Tenon Joint for Wood Products

Evaluations of Load-Deformation Behavior of Soil Nail Using Hyperbolic Pullout Model

Time-Dependent Pullout Behavior Of Glass Fiber Reinforced Polymer (Gfrp) Soil Nail In Sand

Prediction of withdrawal resistance of self-tapping screws in softwood structural lumber

Experimental Investigation on the Behavior of Plybamboo Sheathing-to-framing Screwed Connections

INFLUENCE OF WOOD SCREW SHAPE ON WITHDRAWAL PERFORMANCE IN SOFT AND LIGHT WOOD

Field Pullout Testing and Performance Evaluation of GFRP Soil Nails

Cooperation Pullout Test of Double Self-Tapping Screws in Wood Structures

Failure behavior and mechanism of slopes reinforced using soil nail wall under various loading conditions

Modelling of Glued Laminated Timber Joints with Glued-in Rod Considering Bond-Slip Location Function

Experimental Analysis of Nailed LBL-to-LBL Connections Loaded Parallel to Grain

Analysis of Behavior of Nailing Supported Mixed Soil-Cement Wall in Excavation

Model Tests by Centrifuge of Soil Nail Reinforcements