Abstract:This paper is a study on the mechanical behavior of grade 8.8 and 10.9 small-sized (M14-M20) bolts with the thread into the bolt hole. A total of eighty specimens with different thread depth, surface treatment, bolt diameter, and bolt strength grade were subjected to static loading tests. The effects of different parameters on the properties of specimens such as ultimate bearing capacity, initial slip load, ductility, and initial stiffness were systematically investigated. It was demonstrated that the typical failure mode is bolt shear failure. The increase in thread depth causes the ultimate bearing capacity of bolted connections to decrease, and other design parameters also have effects on the ultimate bearing capacity. The ultimate bearing capacity of bolted connections with shot-blasted surfaces is greater than that of bolted connections with wire-brushed surfaces. Moreover, bolted connections with a greater thread depth have a lower yield strength. The method of contact surface treatment, bolt diameter, and strength grade also affect the yield load of bolted connections. The initial stiffness does not change much with the increase of the thread depth. In addition, the increase in thread depth decreases the ductility coefficient and ultimate displacement, which has a negative effect on deformation performance, and the ductility coefficient of bolted connections also decreases with the increase in bolt grade. Finally, based on the test results, a design formula for predicting the ultimate bearing capacity was proposed, and the calculation results match the experimental results well. The difference in ultimate bearing capacity due to thread depth can be well described by the formula.

INFLUENCE OF WOOD SCREW SHAPE ON WITHDRAWAL PERFORMANCE IN SOFT AND LIGHT WOOD

Experimental study on withdrawal capacity of self-tapping screws in Chinese fir

Cooperation Pullout Test of Double Self-Tapping Screws in Wood Structures

High-strain Rate Compressive Behavior of Douglas Fir and Glubam

Study on withdrawal force capacity of insert nut in wood-based materials used for case furniture

Test Studies on Wooden Double-tapping Screw Pullout Coordination

Experimental investigation of mechanical behavior of grade 8.8 and 10.9 small-sized (m14-m20) bolts with the thread into the bolt hole

Experimental investigation on withdrawal resistance performance of nails in southern pine

Prediction of withdrawal resistance of self-tapping screws in softwood structural lumber

Investigation of the appropriate thread depth for bioabsorbable screws

Biomechanical Comparison of Fixation Stability among Various Pedicle Screw Geometries: Effects of Screw Outer/Inner Projection Shape and Thread Profile

A Novel Screw Modeling Approach to Study the Effects of Screw Parameters on Pullout Strength.

RESEARCH ON LAG SCREW PULLOUT PERFORMANCE OF JOINT UNIT OF THE WOODEN SPACE TRUSS SYSTEM

Experimental Investigation on the Behavior of Plybamboo Sheathing-to-framing Screwed Connections

Experimental and Numerical Study on Methods of Testing Withdrawal Resistance of Mortise-and-Tenon Joint for Wood Products

Design and biomechanical study on newly-manufactured cortex self-tapping interlocking screw

Three-Dimensional Finite Element Analysis Of Biomechanical Pullout Strength Characteristics Of Screw With Different Materials And Structures In Cancellous Bone

Pullout Resistance of Densified Wood Dowel Welded by Rotation Friction

Improved design of self-tapping screw (STS) for Korean larch and red pine cross laminated timber (CLT)

Study on the strength mechanism of the wooden round-end mortise-and-tenon joint using the digital image correlation method

Influence of test methodology on the characterization of the parallel-to-grain timber embedment strength and foundation modulus of dowels