Abstract:Carbon Fiber Reinforced Polymer (CFRP) is extensively utilized in the cutting-edge industries, attributed to its superior mechanical performances. The machining performance of CFRP, however, is significantly influenced by its pronounced anisotropy, particularly the fiber orientation. Consequently, Fiber Cutting Angle (FCA) is widely employed to assess the relationships between cutting geometry and machining performance, yet the coupling of cutting orientation and fiber orientation, along with the absence of feeding angle, limits the further exploration into the underlying mechanisms. This article introduced a novel geometrical framework termed "Cutting Geometry Space" (CGS), for modeling CFRP machining process. Incorporating feeding orientation, cutting orientation and fiber orientation, CGS is applied in milling process for an enhanced comprehension of cutting geometry. Additionally, a pragmatic milling experiment is designed, efficiently evaluating the performances of 1092 combinations of CGS parameters in 13 T700-12K/epoxy CFRP specimens. Microscopical observations and morphological analyses reveals four predominant fracture mechanisms in CFRP machining, with fiber-matrix debonding and bending-induced fracture identified as the key contributors to macroscopic cavity formation. A designated "Damage Zone" within the CGS, encompassing a cutting angle range of 90 degrees-270 degrees degrees -270 degrees and a fiber tilt angle of 15 degrees-60 degrees, degrees -60 degrees , is identified as a high-risk area for machining-induced surface cavities. Additionally, the impact of feeding orientation on the surface integrity is confirmed and explained by the influence on the equivalent FCA. Furthermore, the study elucidates chatter marks as a phenomenon induced by a confluence of factors, including generalized down milling, high FCA, and a significant effective cutting fiber count. The observed shift in chatter mark with varying feeding angles provides deep insights into the complex dynamics of machining parameters.

Effects of Milling Methods on Cutting Performance of Wood–Plastic Composites Based on Principal Component Analysis

Machinability of Different Wood-Plastic Composites during Peripheral Milling

Machinability of wood-plastic composites from the CNC milling process using the Box-Behnken design and response surface methodology for building applications

Surface roughness and chip morphology of wood-plastic composites manufactured via high-speed milling

Energy Efficiency Optimization for Machining of Wood Plastic Composite

Research on the orthogonal cutting performance of polyethylene-based wood-plastic composite based on principal component analysis

Factor Analysis of Machining Parameters of Fiber-Reinforced Polymer Composites Based on Finite Element Simulation with Experimental Investigation

Investigation on the Effects of Microstructure on Machining Unidirectional Carbon Fiber Reinforced Polymer Composites with a Modified Force Model

Investigation on Cutting Power of Wood–Plastic Composite Using Response Surface Methodology

Built-up edge formation mechanisms in orthogonal cutting of wood-plastic composite

Frictional behaviour of wood-Plastic composites against cemented carbide during sliding contact

Machinability of wood fiber/polyethylene composite during orthogonal cutting

Cutting Force and Surface Roughness during Straight-Tooth Milling of Walnut Wood

Investigation of the orthogonal cutting of wood-plastic composites for obtaining better stability and quality

Influence of cryogenic CO2 on wood-plastic composite (WPC) turning-performance characteristics: a comparison with dry machining

Effect of cooling and lubrication conditions on the variable angle milling of unidirectional CFRP with PCD Tools

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Numerical and experimental investigation of orthogonal cutting of carbon fiber-reinforced polyetheretherketone (CF/PEEK)

A Unified Geometrical Modeling and Analysis Method for Evaluating CFRP Machining Performance: Cutting Geometry Space

Study on the Milling Machinability of Bamboo-Based Fiber Composites

Effect of machining parameters on the milling process of 2.5D C/SiC ceramic matrix composites