Abstract:The use of secondary batteries has been on the rise in recent years, especially solid-state batteries. However, security issues have become a major challenge in practical applications. Both lithium-ion batteries and lithium–sulfur batteries have safety problems that need to be solved. Herein, a polymer electrolyte suitable for the two types of batteries was easily synthesized. A polyvinylidene fluoride (PVDF)-based polymer electrolyte with 1-butyl-1-methyl pyrrolidine bis-trifluoromethyl sulfonimide (Py14TFSI) was used as the solid electrolyte. The ionic conductivity of the LiTFSI/Py14TFSI/cellulose acetate (CA)/PVDF polymer electrolyte was 1.45 × 10–4 S cm–1. The electrochemical stability window was 4.95 V. The transference number of the lithium ion was 0.231. The constant-current polarization test results showed that the polarization voltage was only 0.04 V when the current density was 1 mA cm–2. The first discharge specific capacity of the Li | LiTFSI/Py14TFSI/CA/PVDF | LiFePO4 battery was 125.7 mA h g–1 (0.5 C), and the capacity retention rate was 95.22% after 50 cycles at room temperature. A multistage porous conductive carbon (M-PCC) material with micropores and mesopores was applied as the host of the sulfur cathode of lithium–sulfur batteries. The M-PCC material provided a carrier for sulfur and sulfide with a specific surface area of 1132.68 m2 g–1. The solid-state lithium–sulfur battery (Li | LiTFSI/Py14TFSI/CA/PVDF | ) had excellent electrochemical performance. The first discharge specific capacity was 1245.9 mA h g–1 with an average Coulombic efficiency of 97.34%. The energy of Py14TFSI cation and Li2S8 calculated by DFT was 8.8345 eV, which indicated that the polysulfide cannot adsorb onto the polymer electrolyte. XPS was used to measure the elemental composition of the anode–electrolyte interface after charge–discharge cycling. The uniform growth of lithium dendrite was observed by the SEM image of the anode after cycles. The results showed that a solid-state lithium–sulfur battery produced uniform solid electrolyte interface films and completely suppressed the shuttle effect.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.1c00658?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.1c00658</a>.Experimental section; characterization; AFM of polymer electrolyte: PVDF/Py14TFSI = 10:0 and PVDF/Py14TFSI = 10:7.5; XRD patterns of M-PCC; SEM images of M-PCC and ; TEM images of M-PCC (40,000×) and M-PCC(200,000×); CV curves of the Li | liquid electrolyte/PP separator | battery; active products at different charge and discharge stages; impedance spectrum at different cycles of the Li | liquid electrolyte/PP separator | battery; TG curve of ; and comparison the discharge specific capacity of the Li | LiTFSI/Py14TFSI/CA/PVDF | battery with the previously reported solid polymer electrolyte lithium–sulfur batteries at different temperatures and rate capabilities (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.1c00658/suppl_file/ae1c00658_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Copolymerized Sulfur with Intrinsically Ionic Conductivity, Superior Dispersibility, and Compatibility for All-Solid-State Lithium Batteries

Polyisoprene Captured Sulfur Nanocomposite Materials for High-Areal-Capacity Lithium Sulfur Battery

Solid-State Polymer Electrolyte Solves the Transfer of Lithium Ions between the Solid–Solid Interface of the Electrode and the Electrolyte in Lithium–Sulfur and Lithium-Ion Batteries

Cathode-Supported-Electrolyte Configuration for High-Performance All-Solid-State Lithium–Sulfur Batteries

Facile In Situ Chemical Cross-Linking Gel Polymer Electrolyte, which Confines the Shuttle Effect with High Ionic Conductivity and Li-Ion Transference Number for Quasi-Solid-State Lithium–Sulfur Battery

A semi-immobilized sulfur-rich copolymer backbone with conciliatory polymer skeleton and conductive substrates for high-performance Li-S batteries

High-Capacity, Sustainable Lithium–Sulfur Batteries Based on Multifunctional Polymer Binders

Poly(ionic liquid)-Based Conductive Interlayer as an Efficient Polysulfide Adsorbent for a Highly Stable Lithium–Sulfur Battery

Highly Elastic and Polar Block Polymer Binder Enabling Accommodation of Volume Change and Confinement of Polysulfide for High-Performance Lithium–Sulfur Batteries

Facile and Powerful In Situ Polymerization Strategy for Sulfur-Based All-Solid Polymer Electrolytes in Lithium Batteries

Composite Electrolytes Based on Poly(Ethylene Oxide) and Lithium Borohydrides for All-Solid-State Lithium–Sulfur Batteries

In Situ Polymerization Bi‐Functional Gel Polymer Electrolyte for High Performance Quasi‐Solid‐State Lithium−Sulfur Batteries

Oxygen self-doping pyrolyzed polyacrylic acid as sulfur host with physical/chemical adsorption dual function for lithium-sulfur batteries

Sulfur-Rich Polymers Based Cathode with Epoxy/Ally Dual-Sulfur-Fixing Mechanism for High Stability Lithium–Sulfur Battery

The Dual Actions of Modified Polybenzimidazole in Taming the Polysulfide Shuttle for Long-Life Lithium–sulfur Batteries

Novel Gel Polymer Electrolyte for High-Performance Lithium–sulfur Batteries

Enhanced electrochemical stability and ion transfer rate: A polymer/ceramic composite electrolyte for high-performance all-solid-state lithium-sulfur batteries

Metal Coordinated Polymer as Three‐Dimensional Network Binder for High Sulfur Loading Cathode of Lithium–Sulfur Battery

Sulfur polymerization strategy based on the intrinsic properties of polymers for advanced binder‐free and high‐sulfur‐content Li–S batteries

Sulfur Polymers as Flexible Interfacial Additives for Low Stack‐Pressure Solid‐State Lithium‐Ion Batteries

Higher performance of Lithium-Sulfur Batteries by tuning the chemical structure of multifunctional NaPSS-PEGA copolymer binders