Abstract:Li-ion batteries are the dominant solution for many applications, from small electronic devices up to hybrid and fully electric vehicles.[1] However, this technology is now mature and new chemistries are needed to reach high specific energy while ensuring safety. Despite a relatively low operating voltage, sulfur (S 8 ) is an attractive cathode active material due to its high theoretical specific capacity; a factor of six higher than traditional LiCoO 2 cathodes.[2] To realize high energy density systems, the S 8 cathode must be paired with a Li metal anode. Many challenges remain to be addressed to effectively couple a Li metal with a S 8 cathode such as the low S 8 utilization, the strong volume change of active material upon cycling, the insulating nature of S 8 and of the final product Li 2 S, the solubility of polysulfides in the electrolyte.[3] This issues lead to poor capacity retention, limited cycle life, and low Coulombic efficiency. To address the polysulfide dissolution problem one approach consists in confining S 8 within mesoporous and nanoporous carbon.[4] However, conventional liquid electrolytes are not stable against Li metal. A solution is then to use a solid polymer electrolytes, such as polystyrene- b -poly(ethylene oxide) (SEO) block copolymer doped with LiTFSI salt, known to stabilize Li metal.[5] The goal of this study is to understand the behavior of Li-S 8 batteries comprising a SEO electrolyte. The cathode is a composite made of carbon, SEO electrolyte and sulfur-impregnated carbon nanospheres.[6] The cells were cycled and exhibited significant capacity fade. We thus used hard X-ray microtomography to determine the reason for this capacity fade. Figure 1 represents tomography images prior and after cycling. In addition to polysulfide dissolution, our observations indicate that the battery failure in our system is also due to strong changes at the Li/SEO interface. References [1] J. B. Goodenough, K.-S. Park, J. Am. Chem. Soc. , 135 (2013) 1167 (2013). [2] P. G. Bruce, S. A. Freunberger, L. J. Hardwick, J.-M. Tarascon, Nat. Mater. , 11 (2012) 19. [3] S. S. Zhang, J. Power Sources , 231, 153 (2013). [4] X. Fan, W. Sun, F. Meng, A. Xing, J. Liu, Green Energy Environ. , 3 (2018) 2. [5] D. T. Hallinan, S. A. Mullin, G. M. Stone, and N. P. Balsara, J. Electrochem. Soc. , 160, (2013) A464. [6] D. Devaux, I. Villaluenga, X. Jiang, Y. H. Chang, D. Y. Parkinson, N. P. Balsara, J. Electrochem. Soc. , 167 (2020) 060506 Figure 1

Sulfur-Rich Polymers Based Cathode with Epoxy/Ally Dual-Sulfur-Fixing Mechanism for High Stability Lithium–Sulfur Battery

A Novel Strategy for High-Stability Lithium Sulfur Batteries by in Situ Formation of Polysulfide Adsorptive-Blocking Layer

A High-Energy Sulfur Cathode in Carbonate Electrolyte by Eliminating Polysulfides Via Solid-Phase Lithium-Sulfur Transformation

High sulfur-containing carbon polysulfide polymer as a novel cathode material for lithium-sulfur battery

Metallic and Polar Co 9 S 8 Inlaid Carbon Hollow Nanopolyhedra As Efficient Polysulfide Mediator for Lithium−sulfur Batteries

A semi-immobilized sulfur-rich copolymer backbone with conciliatory polymer skeleton and conductive substrates for high-performance Li-S batteries

Sulfur polymerization strategy based on the intrinsic properties of polymers for advanced binder‐free and high‐sulfur‐content Li–S batteries

High-Capacity, Sustainable Lithium–Sulfur Batteries Based on Multifunctional Polymer Binders

Enhanced Polysulfide Regulation <i>via</i> Porous Catalytic V<sub>2</sub>O<sub>3</sub>/V<sub>8</sub>C<sub>7</sub> Heterostructures Derived from Metal-Organic Frameworks toward High-Performance Li-S Batteries

Efficient Polysulfides Anchoring for Li-S Batteries: Combined Physical Adsorption and Chemical Conversion in V2O5 Hollow Spheres Wrapped in Nitrogen-Doped Graphene Network

A Sulfur-Limonene-Based Electrode for Lithium-Sulfur Batteries: High-Performance by Self-Protection

Electrochemically Stable Rechargeable Lithium–Sulfur Batteries Equipped with an Electrospun Polyacrylonitrile Nanofiber Film

A Lithium/Polysulfide Battery with Dual-Working Mode Enabled by Liquid Fuel and Acrylate-Based Gel Polymer Electrolyte.

Enhanced Adsorption and Conversion of Polysulfides by ZIF‐67‐Based Co3O4/TiO2 Heterostructure and Attached Polypyrrole 3D Conductive Network for Lithium–Sulfur Batteries with Stable and Extended Cycling

An Entangled Cobalt–Nitrogen–Carbon Nanotube Array Electrode with Synergetic Confinement and Electrocatalysis of Polysulfides for Stable Li–S Batteries

Advanced Polymers in Cathodes and Electrolytes for Lithium–Sulfur Batteries: Progress and Prospects

Facile Synthesis of Porous Li2S@C Composites As Cathode Materials for Lithium–sulfur Batteries

Strategy for practically constructing high-capacity sulfur cathode by combining sulfur-hierarchical porous graphitic carbon composite with surface modification of polydopamine

X-Ray Microtomography Analysis of Li-Sulfur Batteries with a Block Copolymer Electrolyte

Free-Standing Sulfur Cathodes Enabled by a Cationic Polymer for Lean Electrolyte Lithium–Sulfur Batteries

Molecular Structure-Controlled Synthesis of Sulfur-Containing Polymers for Rechargeable Li-S Batteries