Abstract:Complex hydride LiBH4 is a promising solid-state electrolyte (SSE) for rechargeable batteries, owing to its great compatibility with the lithium metal anode and good mechanical properties. However, LiBH4 only exhibits high ionic conductivity (10–3 S cm–1) with the hexagonal structure at temperatures above 117 °C. To overcome this obstacle, composite poly(ethylene oxide)–hydride electrolytes were synthesized by a solution-casting method. PEO–Li4(BH4)3I (EO/Li+ = 10) delivers the highest ionic conductivity of 4.09 × 10–4 S cm–1 with high Li+ transference number of 0.45 at 70 °C. The addition of nano-SiO2 as an inorganic filler enhances the dendrite-free ability of electrolyte membranes dramatically and prolongs the cycle life of the Li symmetric battery from <100–360 h. In order to suppress the shuttling effect of polysulfide and volume expansion in lithium–sulfur (Li–S) batteries, sulfurized pyrolyzed poly(acrylonitrile) was selected as the cathode material for all-solid-state batteries, which presented a remarkable cycling stability of 232 (967 for sulfur content) mA h g–1 after 75 cycles. These attempts not only decrease the application temperature of LiBH4 but also broaden the utilization of hydride in SSEs.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acssuschemeng.1c00381?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acssuschemeng.1c00381</a>.Arrhenius plots of PEOn–LiBH4 (n = 30, 20, 10, 5, and 3); Li+ transference number of PEO20–LiTFSI; Arrhenius plots, DC polarization and LSV of PEO10–Li4(BH4)3I–SiO2(5 wt%); XRD patterns of PEO, LiBH4, and Li4(BH4)3I; DSC curves of PEO, PEO20–LiBH4, PEO10–Li4(BH4)3I, and PEO10–Li4(BH4)3I–SiO2(5 wt%) membranes; digital photographs of electrolyte membranes; SEM images of electrolyte membranes and digital photograph of Ginkgo leaves; FTIR spectra of PEO10–Li4(BH4)3I–SiO2; thickness of membranes; galvanostatic cycling curves of Li|PEO10–Li4(BH4)3I–SiO2(5 wt%)|Li; element composition of SPAN cathode; dQ/dV curves of Li-SPAN battery; discharge–charge profiles of Li|PEO10–Li4(BH4)3I–SiO2(5 wt%)|SPAN cell; relevant data for calculating Li+ transference numbers of PEO20–LiBH4 and PEO10–Li4(BH4)3I; cycle performance of Li-SPAN batteries; and resistance values for the equivalent circuit elements (<a class="ext-link" href="/doi/suppl/10.1021/acssuschemeng.1c00381/suppl_file/sc1c00381_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Composite Electrolytes Based on Poly(Ethylene Oxide) and Lithium Borohydrides for All-Solid-State Lithium–Sulfur Batteries

An All-Solid-State Battery Based on Sulfide and PEO Composite Electrolyte.

Cationic Cyclopropenium-Based Hyper-Crosslinked Polymer Enhanced Polyethylene Oxide Composite Electrolyte for All-Solid-State Li-S Battery

Tailoring Stable PEO‐Based Electrolyte/Electrodes Interfaces via Molecular Coordination Regulating Enables 4.5 V Solid‐State Lithium Metal Batteries

Li 6.7 La 3 Zr 1.7 Ta 0.3 O 12 Reinforced PEO/PVDF-HFP Based Composite Solid Electrolyte for All Solid-State Lithium Metal Battery

Composite Solid Electrolyte for Solid-State Lithium Batteries Workable at Room Temperature

Interphase Optimum via Synergistic Effect of Poly(1,3‐dioxolane) Electrolytes and Lithium Difluorophosphate for Stable Lithium Metal Batteries

Application of a Modified Porphyrin in a Polymer Electrolyte with Superior Properties for All-Solid-State Lithium Batteries

An Ion‐Dipole‐Reinforced Polyether Electrolyte with Ion‐Solvation Cages Enabling High–Voltage‐Tolerant and Ion‐Conductive Solid‐State Lithium Metal Batteries

Bifunctional Interphase-Enabled Li 10 GeP 2 S 12 Electrolytes for Lithium–Sulfur Battery

Graphene Oxide Enabled Flexible PEO-Based Solid Polymer Electrolyte for All-Solid-State Lithium Metal Battery

SnF2-Catalyzed Lithiophilic-Lithiophobic Gradient Interface for High-Rate PEO-Based All-Solid-State Batteries

Composite Hybrid Quasi-Solid Electrolyte for High-Energy Lithium Metal Batteries

High-Performance Solid Lithium Metal Batteries Enabled by LiF/LiCl/LiIn Hybrid SEI via InCl3 -Driven In Situ Polymerization of 1,3-Dioxolane

Flexible PVDF-HFP based hybrid composite solid electrolyte membrane co-filled with hydroxypropyl methyl cellulose and Li6.4La3Zr1.4Ta0.6O12 for high-performance solid-state lithium batteries

Double-Layered Multifunctional Composite Electrolytes for High-Voltage Solid-State Lithium-Metal Batteries

Ultrathin Solid Composite Electrolyte Based on Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 /PVDF-HFP/LiTFSI/Succinonitrile for High-Performance Solid-State Lithium Metal Batteries

Synergetic Control of Li+ Transport Ability and Solid Electrolyte Interphase by Boron‐Rich Hexagonal Skeleton Structured All‐Solid‐State Polymer Electrolyte

Copolymerized Sulfur with Intrinsically Ionic Conductivity, Superior Dispersibility, and Compatibility for All-Solid-State Lithium Batteries

Reaction Mechanism Optimization of Solid‐State Li–S Batteries with a PEO‐Based Electrolyte

Constructing robust cathode/Li interfaces and intensifying ion transport kinetics for PEO-based solid-state lithium-sulfur batteries