Abstract:The transition section between bottom dense zone and top dilute zone is important for fast gas-solids catalytic reactions,such as methanol to olefins(MTO).Solids concentration and fluctuation parameters in the transition section of a fluidized bed with 95 mm i.d.were measured by using reflective optical fiber probe(PV6D).The influences of superficial gas velocity and static bed height were investigated.An Eulerian-Eulerian two-fluid model that incorporated kinetic theory of granular flow and modified three-zone drag law was used to predict the flow structure in the turbulent fluidized bed.The axial and radial distributions of solids concentration were simulated by means of computational fluid dynamics(CFD).The experiments showed two axial profiles of solids distribution in the transition section:exponential and S-shaped.The maximum gradients of both axial and radial solids concentration profiles were located in the transition section,which meant that solids distribution in the transition section was much more non-uniform than that in the dilute and dense sections.The change of gas velocity and static bed height would cause a shift between exponential and S-shaped profiles,and significantly affect solids concentration in the dense region near the wall and at the bottom.Probability density distribution of local solids concentration revealed that when static bed height was small,the location of maximum voidage would gradually move from core region to annular region with increasing gas velocity,resulting in a bimodal distribution of voidage.A modified three-zone drag model was proposed by taking the effect of particle clustering into account for CFD simulation.The simulated solids concentration distribution agreed well with experimental data in the transition section except for the distributor zone.

External Wetting Efficiency in a Three-Phase Fixed Bed Loaded with Porous and Non-Porous Packings

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

Flow Regime Transition and Liquid Distribution in a 3D Concurrent Downflow Three-Phase Moving Bed

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Dynamic and Steady-State Characterization of the Liquid Spray Zone in an Externally Heated Gas–Solid Fluidized Bed

Evolution and Fluidization Behaviors of Wet Agglomerates Based on Formation-Fragmentation Competition Mechanism

Characterization of Flow Pattern of Cohesive Particles in Gas-Solid Fluidized Bed Via Axial Distribution of Particle Motions

Experimental and Modeling Investigation of Liquid-Induced Agglomeration in a Gas–Solid Fluidized Bed with Liquid Spray

Experimental study on pressure drop of packed beds with binary sintered ore particle mixtures

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Wetting Dynamics of Spontaneous Imbibition in Porous Media: from Pore Scale to Darcy Scale

Liquid droplet dispersion in a rotating packed bed: Experimental and numerical studies

Experimental study on the friction factor of permeable gravel bed

Performance Of A Three-Phase Fluidized Bed As A Reactive Distillation Device

Flow regimes in a gas–liquid–solid three‐phase moving bed

Unravelling the improved permeability of wet granular packed bed via embedding dry particles: From multi-scale mechanisms to combustion enhancements

Porous-media model based particle-resolved simulation of a fixed bed with olefin catalytic cracking reaction

Particle-Scale Investigation of the Hydrodynamics and Tube Erosion Property in A Three-Dimensional (3-D) Bubbling Fluidized Bed with Immersed Tubes

Experimental investigation of wet particle flow characteristics in a pseudo two-dimensional fluidized bed

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

Experimental Investigation on Local Particle Volume Fractions Distribution in Offset-Exit Circulating Fluidized Bed