Abstract:The gas-solid vertical single helical ribbon agitated reactor is widely used in the polypropylene industry. The gas flow and mass transfer determine the heat transfer capacity and product quality. In this work, the pressure drop was measured below and above minimum fluidization velocity (umf). Then, the axial and radial dispersion coefficients (DL and DR) were estimated below umf by measuring the step residence time distribution and the stationary radial tracer profiles, respectively. Pressure analysis show the agitation significantly reduces the bed pressure drop, changing the fixed bed below umf and bubbling bed above umf to an agitated bed with a periodic voidage. The DL was proportional to the gas velocity, with little influences of the stirring speed. The radial tracer profiles show the bed is divided by the inner diameter of the helical ribbon into the peripheral ascending region and the central descending region, without gas exchange between them. Furthermore. the tracer profiles in the descending region are classified into two types. For type I, the DR, calculated by the plug flow model with radial dispersion, is proportional to the gas velocity, with little effects of stirring speed. Type II shows uniform profiles due to the deflection of the gas flow toward the low pressure area at the inner diameter of helical ribbon. The causes of the two types are explained by the relative size of particle circulation and gas flux. These two flow regimes are quantitatively clarified with an empirical correlation of Re and Fr as flow regime transition boundary, namely dispersed plug flow and perfect mixing flow. With lower Re and higher Fr, it changes from dispersed plug flow to perfect mixing flow.

Performance Of A Three-Phase Fluidized Bed As A Reactive Distillation Device

Progress on agitated apparatus for polymer devolatilization and its CFD simulation

Exploring the Essence of Three-Phase Packed Distillation: Substantial Mass Transfer Computation

Mixing Effects on the Gas Flow and Mass Transfer in a Vertical Single Helical Ribbon Agitated Reactor for Propylene Polymerization

Investigation of pressure drop in a cocurrent downflow three-phase moving bed

Particle Agglomeration and Control of Gas-Solid Fluidized Bed Reactor with Liquid Bridge and Solid Bridge Coupling Actions

Realization and Control of Multiple Temperature Zones in Liquid‐containing Gas–solid Fluidized Bed Reactor

Gas-liquid-solid three-phase reactor and applications thereof

[Gas-Liquid Mass Transfer in Three-Phase Inverse Turbulent Bed Reactor].

Study on Hydrodynamics and Mass Transfer Characteristic of a New Gas-liquid Reactor

Flow regimes in a gas–liquid–solid three‐phase moving bed

Performance of a new vapor–liquid–solid three-phase circulating fluidized bed evaporator

Investigation on gas-liquid-solid circulating fluidized bed

Fluid Dynamics of a Novel Reactive Distillation Reactor

Hydrodynamics in an Airlift Inner-Loop Three-Phase Biological Fluidized Bed

The gas–liquid mass transfer and pressure drop behaviors of the gas–liquid–liquid three‐phase flow in micro‐packed beds

Hydrodynamics of a Gas-Liquid-solid Three Phase Circulating Fluidized Bed

Dryout Phenomena in a Three‐phase Fixed‐bed Reactor

Experimental study on gas–liquid interfacial area and mass transfer coefficient in three-phase circulating fluidized beds

Progress on Higee distillation—Introduction to a new device and its industrial applications

Characterization on Hydrodynamic Behavior in Liquid‐containing Gas‐solid Fluidized Bed Reactor