Abstract:Dynamical adsorption of CO2 in flue gas by fixed-bed was simulated by Aspen Adsorption to investigate the suitable mathematical model for CO2 adsorption by activated carbon and the solid adsorption process for regenerating CO2 using steam blowing. Comparison between simulative and experimental breakthrough curves showed that the simulation data with ideal adsorption solution-linear diver force (IAS-LDF) model was more coincident with experimental data than results of models using pure component adsorption or Particle MB model. A complete temperature swing adsorption model was established, and the fixed-bed was heated and cooled respectively by high-temperature steam and adsorbed flue gas. The effects of purge temperature, adsorption / desorption time on CO2 capture rate, product purity and energy consumption were analyzed. The results showed that the increase of purge temperature enhanced the capture rate significantly and raised energy consumption slightly, but had few effects on the product purity. When the purge temperature increased from 100 °C to 200 °C with the adsorption / desorption time of 2~4 min, the capture rate increased by 11.1%, the energy consumption increased by 13.9%, and the product purity increased by 1.7%. The increase of adsorption / desorption time greatly improved the product purity, but reduced the capture rate and increased the energy consumption obviously. When the adsorption / desorption time increased from 2 min to 4 min with the purge temperature of 100~200 °C, the product purity increased by 13.6%, the capture rate of CO2 decreased by 4.8%, and the energy consumption increased by 43.1%.

Mathematical modelling of carbon capture in a packed column by adsorption

Mathematical Modelling of Expanded Bed Adsorption – a Perspective on in Silico Process Design

Simulation of Levulinic Acid Adsorption in Packed Beds Using Parallel Pore/Surface Diffusion Model

Modelling large mass removal in adsorption columns

A mathematical model for contaminant adsorption in packed columns using nonlinear mass transfer

A review of mathematical modeling of fixed-bed columns for carbon dioxide adsorption

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Mathematical modeling of breakthrough curves in dynamic column adsorption: analytical solutions and validation

Mass transfer from a fluid flowing through a porous media

Experimental Study of Breakthrough Adsorption on Activated Carbon for CO2 Capture

Modeling and Comparative Analysis of CO2 Absorption Columns in Electrochemical and Thermochemical Carbon Capture Systems

Numerical Modelling of Flow and Coupled Mass and Heat Transfer in an Adsorption Process

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Mathematically Modeling Fixed-Bed Adsorption in Aqueous Systems

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Simulation of Capturing Carbon Dioxide from Flue Gas by Activated Carbon

A Simple Mathematical Model and Computer Simulation of Non-isothermal Gas Absorption in Packed Tower

Modeling Of Elemental Mercury Control By Sorbents From Simulated Flue Gases

Modeling of moving bed CO 2 capture process using amine solid adsorbent and its validation using pilot plant test data

Investigation of CO2 and CH4 capture from syngas in adsorption process and breakthrough modeling by modified Lattice-Boltzmann mesoscale method

Numerical Simulation of Multicomponent Isobaric Adsorption in Fixed Bed Columns