Abstract:The Cyclic CO2 capture and CaCO3 regeneration characteristics in a small fluidized bed reactor were experimentally investigated with limestone and dolomite sorbents. Kinetic rate constants for carbonation and calcination were determined using thermogravimetric analysis (TGA) data. Mathematical models developed to model the Ca-based sorbent multiple cycles of CO2 capture and calcination in the bubbling fluidized bed reactor agreed with the experimental data. The experimental and simulated results showed that file CO2 in flue gases could be absorbed efficiently by limestone and dolomite. The time for high-efficiency CO2 capture decreased with an increasing number of cycles because of the loss of sorbent activity, and the final CO2 capture efficiency remained nearly constant as the sorbent reached its final residual capture capacity. In a continuous carbonation and calcination system, corresponding to the sorbent activity loss, the carbonation kinetic rates of sorbent undergoing various cycles are different, and the carbonation kinetic rates of sorbent circulating N times in the carbonation/calcination cycles are also different because of the different residence time of sorbent in the carbonator. Therefore, the average carbonation rate was given based on the mass balance and exit age distribution for sorbent in the carbonator. The CO2 capture characteristics in a continuous carbonation/calcination system were predicted, taking into consideration the mass balance, sorbent circulation rate, sorbent activity loss, and average carbonation kinetic rate, to give useful information for the reactor design and operation of multiple carbonation/calcination reaction cycles.

Modeling of moving bed CO 2 capture process using amine solid adsorbent and its validation using pilot plant test data

Carbon dioxide capture by functionalized solid amine sorbents with simulated flue gas conditions.

Bi-disperse Adsorption Model of the Performance of Amine Adsorbents for Direct Air Capture

Development of a Chemistry-Based Isotherm Model and Techno-Economic Optimization of a Moving Bed Process for CO 2 Capture Using a Functionalized Metal-Organic Framework

Experimental Studies And Rate-Based Process Simulations Of Co2 Absorption With Aqueous Ammonia Solutions

Numerical Studies for the Co2 Capture Process in A Fluidized-Bed Absorber

Rate-Based Modelling and Validation of an Absorber and Stripper in an Amine-Based Post-Combustion CO2 Capture Process

Modeling of a Rotary Adsorber for Continuous Capture of Indoor Carbon Dioxide

Experimental study of CO2 capture from air via steam-assisted temperature-vacuum swing adsorption with a compact kg-scale pilot unit

Numerical Simulations of CO2 Absorption by MgO-based Sorbent in a Gas–solid Fluidized Bed

Evaluation of CO2/H2O Co-Adsorption Models for the Anion Exchange Resin Lewatit VPOC 1065 under Direct Air Capture Conditions Using a Novel Lab Setup

Pilot-Scale Experimental Study on the CO2 Capture Process with Existing of SO2: Degradation, Reaction Rate, and Mass Transfer

Characteristics, application and modeling of solid amine adsorbents for CO2 capture: A review

Experiment And Modeling Of Co(2) Capture From Flue Gases In A Fluidized Bed With Limestone And Dolomite Sorbents

CFD SIMULATION AND EXPERIMENTAL STUDY ON CO2 CAPTURE IN FLUIDIZED BED REACTOR USING DRY POTASSIUM-BASED SORBENT

Experiment and Modeling of Co2 Capture from Flue Gases at High Temperature in A Fluidized Bed Reactor with Ca-Based Sorbents

Dynamic Properties in CO2 Adsorption on Amine-Modified MCM-41

Modeling of Vacuum Temperature Swing Adsorption for Direct Air Capture Using Aspen Adsorption

Comparison of Mass Transfer Models on Rate-Based Simulation of CO 2 Absorption and Desorption Processes

Rate-Based Modeling of CO2 Absorption in Aqueous NH3 in a Packed Column

Kinetic Study on CO2 Adsorption Behaviors of Amine-Modified Co-Firing Fly Ash