Abstract:Liquid-phase sintering combining an in-situ reaction method with a slurry method was used to prepare HfB2-MoSi2-SiC coatings of controllable composition and thickness. The effect of the MoSi2 content on the oxidation protection of HfB2-MoSi2-SiC composite coatings in a dynamic aerobic environment from room temperature to 1500 °C and a static constant temperature at 1500 °C in air was investigated. The relative oxygen permeability was used to characterize the oxidation resistance of the coatings. The results of dynamic oxidation test at room temperature~1500 °C show that the initial oxidation weight loss temperature of the samples is increased from 775 to 821 °C, and the maximum weight loss rate is decreased from 0.9×10−3 to 0.2×10−3 mg·cm−2·s−1 with increasing MoSi2 content, the lowest relative oxygen permeability is reduced to 12.2% with the weight loss of the sample being decreased from 1.8% to 0.21%. The mechanism of MoSi2 improving the oxidation protection of the coatings is revealed. With an increase of the MoSi2 content, the amount of SiO2 glass phase in the coating is increased, and the dispersion of Hf-oxide on the surface is improved so that a Hf-Si-O glass layer with high stability is formed and the weight loss of the sample is reduced from 0.46% to 0.08% after 200 h oxidation at 1500 °C in air.

Comprehensive oxidation mechanisms of heterogeneous laminated HfB2–SiC/Ti ceramics under oxyacetylene conditions

HfB 2 -SiC ceramics fabricated by reactive melt infiltration and its long-term oxidation behavior at 1650°C

Investigation on the oxidation and ablation behaviors of HfB2-SiC-Si/SiC-Si coatings for carbon/carbon composites

Ablation behavior of high-entropy carbides ceramics (Hf0.2Zr0.2Ta0.2Nb0.2Ti0.2)C upon exposition to an oxyacetylene torch at 2000 °C

Enhanced ablation resistance of HfB2-HfC/SiBCN ceramics under an oxyacetylene torch environment

Oxidation Resistance and Microstructural Analysis of Polymer‐Derived (HfxTa1‐x)C/SiC Ceramic Nanocomposites

Oxidation/ablation behaviors of hafnium carbide-silicon carbonitride systems at 1500 and 2500 C

Comparative Study on the Oxidation Behavior of Si2BC3N/Ta4HfC5 Ceramics at 1000 °C and 1500 °C: Microstructural Evolution and Kinetics Consideration

Experimental and first-principles simulation study on oxidation behavior at 1700 °C of Lu2O3–SiC-HfB2 ternary coating for SiC coated carbon/carbon composites

Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites

Oxidation inhibition behaviors of the HfB2-SiC-TaSi2 coating for carbon structural materials at 1700 °C

Ablation-resistant Ta0.78Hf0.22C solid solution ceramic modified C/C composites for oxidizing environments over 2200 °C

Oxidation kinetic behavior of SiBCN-Ta4HfC5 ceramics at 1600 °C

Ablation mechanism of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C-SiC composite during plasma ablation above 2000 °C

High-temperature oxidation and ablation behavior of plasma sprayed LaB6-MoSi2-TiB2 composite coating

Ablation Mechanism of AlSiB-C/C Composites under an Oxy-Acetylene Torch

Long-term ablation mechanisms of the YB4-Al2O3-Si3N4 modified Cf/HfC-SiC composites at 2600 °C

Preparation of MoSi2-modified HfB2-SiC ultra high temperature ceramic anti-oxidation coatings by liquid phase sintering

Cyclic ablation behavior of mullite-modified C/C-HfC-SiC composites under an oxyacetylene flame at about 2400 °C

Ablation behavior of nose-shaped HfB2-SiC modified carbon/carbon composites exposed to oxyacetylene torch

Ablation behavior of 3D PyC-Cf/SiHfBOC Composites under an oxyacetylene torch environment above 2000 °C