Abstract:The microstructure developed in Zr alloys during irradiation has proven to be increasingly complicated as specimens of varying composition and thermo-mechanical history have been irradiated to higher fluences.Cavities form in neutron and electron irradiated Zr at temperatures between 625 and 775 K. They are less common in the Zircaloys either because of vacancy trapping or because c-component dislocation loops compete for vacancies. There is a complex dependence on the purity of the material which is related to the presence of precipitates or interstitial solutes and on the presence of insoluble gases such as He. The latter is necessary to prevent the collapse of small vacancy clusters to form vacancy loops.Vacancy and interstitial dislocation loops having Burgers vectors of b =13〈112̄0〉 (〈a〉 type) coexist during neutron and electron irradiation. They are generally aligned in rows or layers parallel with (0001). There is a marked decrease in the stability of vacancy 〈a〉 type loops at temperatures ⩾ 723K. Dislocation loops having Burgers vectors of b = 12[0001] (vacancy type), b = 13〈112̄3〉 (interstitial type) and 16〈202̄3〉 (undetermined character) have been identified in Zr following electron irradiation at temperatures between 573–773 K. Vacancy loops of b = 16〈202̄3〉 have been observed in Zr and Zr alloys with a high interstitial solute content following neutron irradiation at temperatures between 560–773 K. Their formation and growth is determined by a combination of: (i) size effect interaction, dependent on their Burgers vector; (ii) stress, generated in collision cascades during neutron irradiation or in oxidised thin foils during electron irradiation; (iii) interstitial solute, which may lower the stacking-fault energy or segregate to the dislocations bounding the loops; and (iv) anisotropic interstitial diffusion (principally in the basal plane).The dislocation network in cold-worked materials is retained during neutron irradiation, at least for fluences up to 7 × 1025 n m−2 at 573 K. Intermetallic precipitates of Zr with Fe, Cr and Ni undergo amorphous transformations (depending on the precipitate composition) during neutron irradiation at temperatures < 600 K. Radiation-induced dissolution and reprecipitation occurs at temperatures > 560 K. The secondary precipitates are often distributed in rows or layers parallel with (0001). Radiation-enhanced precipitation from solution has been observed in ZrSn and ZrNb alloys at temperatures between about 573–873 K.

Observations of Solute Redistribution Obtained using Atom Probe Tomography Examinations of Bulk Zircaloy Neutron Irradiated at Nominally 410°C

Neutron Irradiation Response Of Explosion-Welded Cucrzr/316ln Joints For Iter Application

Effect of Proton and Ne Irradiation on the Microstructure of Zircaloy 4

Effect of Ion Irradiation on Microstructure and Hardness in Zircaloy-4

A review of microstructure evolution in zirconium alloys during irradiation

Correlating microstructure and mechanical properties of harvested high dose Zorita light water reactor internals

Response of 11 B Enriched ZrB 2 Ultra-High Temperature Ceramic to Neutron Irradiation at Elevated Temperatures

From solid solution to cluster formation of Fe and Cr in $α$-Zr

In-situ determination of strain during transient burst testing and the temperature dependence of Zircaloy-4 claddings

An in-situ TEM investigation of microstructure evolution in Cr-coated zirconium alloy under heavy ion irradiation: Simultaneous evolution of both Cr coating and Zr-4 matrix

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Emulation of neutron damage with proton irradiation and its effects on microstructure and microchemistry of Zircaloy-4

A spatially resolved analysis of dislocation loop and nanohardness evolution in proton irradiated Zircaloys

In Situ Microstructural Evolution in Fcc and Bcc Complex Concentrated Solid-Solution Alloys Under Heavy Ion Irradiation

Irradiation Effects on Al0.3CoCrFeNi and CoCrMnFeNi High-Entropy Alloys, and 316H Stainless Steel at 500 °C

In-situ TEM investigation of defect evolution in FeCrAl during post-irradiation annealing

Atom probe tomography characterization of high-dose ion irradiated MA957

Post irradiation examinations of FeCrAl cladding in PWR conditions

Post-Irradiation Examination of Commercial Tantalum Alloys Following Neutron Irradiation

Effects of Solute Elements on Hardening and Microstructural Evolution in Neutron-Irradiated and Thermally-Aged Reactor Pressure Vessel Model Alloys

Evolution of microstructure and mechanical properties of ZrC reinforced FeCrAl alloy after Fe-ions irradiation