Abstract:The microstructure developed in Zr alloys during irradiation has proven to be increasingly complicated as specimens of varying composition and thermo-mechanical history have been irradiated to higher fluences.Cavities form in neutron and electron irradiated Zr at temperatures between 625 and 775 K. They are less common in the Zircaloys either because of vacancy trapping or because c-component dislocation loops compete for vacancies. There is a complex dependence on the purity of the material which is related to the presence of precipitates or interstitial solutes and on the presence of insoluble gases such as He. The latter is necessary to prevent the collapse of small vacancy clusters to form vacancy loops.Vacancy and interstitial dislocation loops having Burgers vectors of b =13〈112̄0〉 (〈a〉 type) coexist during neutron and electron irradiation. They are generally aligned in rows or layers parallel with (0001). There is a marked decrease in the stability of vacancy 〈a〉 type loops at temperatures ⩾ 723K. Dislocation loops having Burgers vectors of b = 12[0001] (vacancy type), b = 13〈112̄3〉 (interstitial type) and 16〈202̄3〉 (undetermined character) have been identified in Zr following electron irradiation at temperatures between 573–773 K. Vacancy loops of b = 16〈202̄3〉 have been observed in Zr and Zr alloys with a high interstitial solute content following neutron irradiation at temperatures between 560–773 K. Their formation and growth is determined by a combination of: (i) size effect interaction, dependent on their Burgers vector; (ii) stress, generated in collision cascades during neutron irradiation or in oxidised thin foils during electron irradiation; (iii) interstitial solute, which may lower the stacking-fault energy or segregate to the dislocations bounding the loops; and (iv) anisotropic interstitial diffusion (principally in the basal plane).The dislocation network in cold-worked materials is retained during neutron irradiation, at least for fluences up to 7 × 1025 n m−2 at 573 K. Intermetallic precipitates of Zr with Fe, Cr and Ni undergo amorphous transformations (depending on the precipitate composition) during neutron irradiation at temperatures < 600 K. Radiation-induced dissolution and reprecipitation occurs at temperatures > 560 K. The secondary precipitates are often distributed in rows or layers parallel with (0001). Radiation-enhanced precipitation from solution has been observed in ZrSn and ZrNb alloys at temperatures between about 573–873 K.

Effect of Proton and Ne Irradiation on the Microstructure of Zircaloy 4

Effect of Ion Irradiation on Microstructure and Hardness in Zircaloy-4

Emulation of neutron damage with proton irradiation and its effects on microstructure and microchemistry of Zircaloy-4

Effect of 2 MeV proton radiation on the microstructure in zircaioy 4

An in-situ TEM investigation of microstructure evolution in Cr-coated zirconium alloy under heavy ion irradiation: Simultaneous evolution of both Cr coating and Zr-4 matrix

A review of microstructure evolution in zirconium alloys during irradiation

Influence of ions irradiation on the microstructural evolution, mechanical and tribological properties of Zr-4 alloy

Assessment of microstructure, mechanical and tribological properties of Zr-4 alloy after pre-oxidation and ion irradiation

Effects of Fe-Ions Irradiation on the Microstructure and Mechanical Properties of FeCrAl-1.5wt.% ZrC Alloys

Microstructural Evolution of Irradiated Cr-Coated Zr-4 under In Situ Transmission Electron Microscopy Heating

Observations of Solute Redistribution Obtained using Atom Probe Tomography Examinations of Bulk Zircaloy Neutron Irradiated at Nominally 410°C

Stress and temperature dependence of irradiation creep in zircaloy-4 studied using proton irradiation

A spatially resolved analysis of dislocation loop and nanohardness evolution in proton irradiated Zircaloys

Evolution of microstructure and mechanical properties of ZrC reinforced FeCrAl alloy after Fe-ions irradiation

Surface Growth, Inner Defects and Interface Mixing of the Cr Coating on Zr Alloy Irradiated by 5 Mev Protons at 400 °C

84MeV C-ions irradiation effects on Zr–45Ti–5Al–3V alloy

Surface growth, inner defects and interface mixing of Cr coating on Zr alloy irradiated by 5 MeV protons at 400°C

Irradiation Damage Simulation of Zircaloy-4 Using Argon Ions Bombardment

Wear Behavior of Zirconium-4 Alloy after Different Irradiation Damage Level

Effects of Irradiation on the Multi-Field Coupling Delayed Hydride Cracking Behavior of Zirconium Alloys

Correlating microstructure and mechanical properties of harvested high dose Zorita light water reactor internals