Abstract:A range of Fe-Cr-Ni alloys are used in nuclear power plants due to their high mechanical strength and corrosion resistance. As a major component of these alloys, Ni contributes to the formation of austenite microstructures. In many nuclear reactor applications the alloys are exposed to ionizing radiation (g-rays) that can continuously decompose water to a range of highly redox active species (such as •OH, H2O2, O2). The change in water chemistry induced by radiation can affect both the general and localized corrosion behaviour of these alloys. In particular, its influence on the susceptibility of an alloy to localized corrosion such as crevice and stress corrosion cracking (SCC) are important for assessment of reactor component aging. As well, corrosion products that dissolve into the reactor coolant can be transported to the reactor core where they can be neutron activated. This can create a radiological hazard for reactor maintenance personnel. Thus, quantifying the rate of general corrosion and the corrosion product transport in a reactor are important safety, operation and maintenance issues. It has been well established that the type of oxide that forms on a surface is a critical factor in determining both general and localized corrosion behaviour. Both alloy composition and water chemistry affect the type of oxide that forms. Systematic studies that examine the effect of alloy composition on corrosion are rare and those available have been conducted mostly from a metallurgical perspective. There are even fewer studies that examine the combined effects of alloy composition and corrosion environment. A fundamental understanding of the mechanism by which the Fe to Ni ratio in a steel alloy influences the corrosion rate in different environments will provide valuable information that can be used for alloy selection and usage. We have investigated the effect of the Fe to Ni ratio of alloy on oxide formation and growth kinetics. For this study, customized steel alloys with different Ni contents and constant Cr content (18 ± 1 %) were prepared. The Ni content ranged from 15 to 25 wt.%, within the range between AISI 316L and Alloy 800 (Fig. 1). The corrosion kinetics was investigated using a combination of coupon corrosion tests and electrochemical measurements. These measurements were augmented by oxide surface and depth analyses using several spectroscopic and imaging techniques, and by post-test solution analyses for dissolved metal loss. We found that the oxide formed at pH 10.6 and 80 °C has a graded layer structure, consisting of a mixed spinel oxide (FeCr2O4/Fe3O4/NiFe2O4) as an inner layer and Ni(OH)2 as an outer layer. The increase in Ni content from 15 to 25 wt.% does not affect the inner layer but increases the thickness of the Ni(OH)2 layer. The increase in Ni content also decreases the total amount of dissolved metal loss. Gamma-irradiation of the corroding system increases the corrosion potential on these alloys. Correspondingly, gamma-radiation accelerates the formation of passive oxide layers and decreases the overall rate of metal dissolution. The observed kinetics of oxide growth and metal dissolution can be explained by the competition kinetics of oxide growth and dissolution for oxidized metals. Figure 1

Effects of Solute Elements on Hardening and Microstructural Evolution in Neutron-Irradiated and Thermally-Aged Reactor Pressure Vessel Model Alloys

Effects of Solute Elements on Microstructural Evolution in Fe-based Alloys During Neutron Irradiation Following Thermal Ageing

Investigation of Cu-enriched precipitates in thermally aged Fe-Cu and Fe-Cu-Ni model alloys

Positron Annihilation Study of Fe-ion Irradiated Reactor Pressure Vessel Model Alloys

Study of the Effect of Ni on Solute Clustering in Α-Fe

A Model to Evaluate the Hardening Effect of Solute Clusters in Fe-based Alloys

The Effect of Mn/Ni on Thermodynamic Properties of Critical Nucleus in Fe-Cu-Mn (ni) Ternary Alloys

The Microstructural Characterization of NiSi-Rich Sub-precipitates Within Cementite in Isothermally Aged Reactor Pressure Vessel Steel

Electron irradiation-enhanced core/shell organization of Al(Cr, Fe, Mn)Si dispersoids in Al–Mg–Si alloys

Thermodynamic and kinetic modeling of Mn-Ni-Si precipitates in low-Cu reactor pressure vessel steels

A Multiscale Study on the Microstructure and Hardening Models of the Irradiation Defects on Reactor Pressure Vessel Steels: Modelling and Experiment

Correlation between microstructure and hardening of 9Cr ferritic/martensitic steels irradiated in spallation neutron source

Changes in the magnetic and mechanical properties of thermally aged Fe-Cu alloys due to nano-sized precipitates

Experiments and Modeling of the Macroscale Mechanical Responses of Neutron-Irradiated FeCrAl Alloys

A comparison study of change in hardness and microstructures of a Zr-added FeCrAl ODS steel irradiated with heavy ions

Effect of heat treatment on microstructure and mechanical properties of Cu–6.9Ni–2.97Al–0.99Fe–1.06Mn alloy

In situ microstructural evolution in face-centered and body-centered cubic complex concentrated solid-solution alloys under heavy ion irradiation

Radiation-induced segregation/precipitation in Fe-Ni and Fe-Mn model alloys: Dose rate and solute effects

Effect of Nickel Content on the Corrosion Behaviour of Stainless Steel at 80 °C

Simulations of Irradiated-Enhanced Segregation and Phase Separation in Fe–Cu–Mn Alloys

The Irradiation Effects on the Nanoindentation Hardness and Helium Bubbles Evolution Mechanism of Ni-based Alloy