Abstract:The world is hungry for energy with an estimated need of 20 TW-year at present. The demand of electrical power (approximately 1/4) could be supplied by the construction of a few 1,000 nuclear fusion power plants each providing 1 GW of clean electrical energy. After achieving the main challenge of producing and confining a deuterium-tritium plasma, the economic, safety, and environmental impact factors will have to be considered for the development of advanced reactor structural materials. These materials will have to withstand demanding heat and radiation flux environments during an estimated 30-40 years of device lifetime with doses of 200 dpa and temperatures of 1,000 oC. Current fusion structural candidate materials such as bcc ferritic/martensitic, fcc austenitic stainless steels, or ODS steels have serious limitations after exposure to radiation and heat fields in terms of their induced brittleness at room temperatures, or fracture by creep at high temperatures. HEA (high entropy alloys) are a new type of complex metallic material that are fabricated on the basis that the alloy contains multiple principal elements. HEAs have come to attention after their intrinsic radiation resistance, and excellent mechanical properties both at low and intermediate temperatures. The chemical complexity is at present the source of many hypotheses about their properties, in particular their phase stability at temperature and irradiation resistance. In this thesis, a novel formulation of short-range order based on electronic structure methods is developed for predicting phase stability in bcc HEAs. This was used to predict the formation of a bcc phase, associated with a Cr-Cr-Cr-Cr tetrahedron cluster, in an fcc lattice. In experimental work, in contrast to previous studies, but in agreement with the modelling results, a bcc phase enriched in Cr was observed in the fcc HEA CrMnFeNi following a recrystallisation heat treatment. This phase was also present after irradiating with Ni ions up to 20 dpa at temperatures of 300 and 450 oC, although no significant increase in volume fraction was measured, indicating that matrix stability was maintained. The mechanical properties after the ion irradiation were investigated by nanoindentation. There was a significant increase in hardness with irradiation dose. The associated changes in microstructure were examined by transmission electron microscopy.

Irradiation Effects on Al0.3CoCrFeNi and CoCrMnFeNi High-Entropy Alloys, and 316H Stainless Steel at 500 °C

Irradiation Effects in High Entropy Alloys and 316H Stainless Steel at 300 °C

High He-ion Irradiation Resistance of CrMnFeCoNi High-Entropy Alloy Revealed by Comparison Study with Ni and 304SS

Structural Changes in High-Entropy Alloys CoCrFeNi and CoCrFeMnNi, Irradiated by He Ions at a Temperature of 700 °C

Evaluation of Radiation Response in CoCrFeCuNi High-Entropy Alloys.

Radiation Resistance of High-Entropy Alloys CoCrFeNi and CoCrFeMnNi, Sequentially Irradiated with Kr and He Ions

Composition and Structure of NiCoFeCr and NiCoFeCrMn High-Entropy Alloys Irradiated by Helium Ions

Enhanced helium ion irradiation tolerance in a Fe-Co-Ni-Cr-Al-Ti high-entropy alloy with L1 2 nanoparticles

Microstructure and micromechanical responses of bulk nanostructured high entropy alloy after heavy-ion irradiation at 500°C

Neutron irradiation response of a Co-free high entropy alloy

Structural Damage and Phase Stability of Al0.3CoCrFeNi High Entropy Alloy under High Temperature Ion Irradiation

Irradiation Behavior in High Entropy Alloys

Simulations of irradiation resistance and mechanical properties under irradiation of high-entropy alloy NiCoCrFe

Irradiation Behaviors of Two Novel Single-Phase Bcc-Structure High-Entropy Alloys for Accident-Tolerant Fuel Cladding

Radiation behaviour of high-entropy alloys for fusion reactor environments

Effect of He on the irradiation resistance of equiatomic CoCrFeMnNi high-entropy alloy

He-ion Irradiation Effects on the Microstructures and Mechanical Properties of the Ti-Zr-Hf-V-Ta Low-Activation High-Entropy Alloys

Atomic scale structure dominated FCC and B2 responses to He ion irradiation in eutectic high-entropy alloy AlCoCrFeNi2.1

Irradiation damage versus lattice distortion in AlNbTiVCrx (x = 0, 0.5, 1) high-entropy alloys from first-principles calculations and irradiation experiments

Effects of Temperature on the Irradiation Responses of Al 0.1 CoCrFeNi High Entropy Alloy

Precipitation behavior of Al x CoCrFeNi high entropy alloys under ion irradiation