Abstract:Surface modification of Ar plasma-pretreated SiLK film coating on a (100)-oriented silicon wafer (SiLK-Si substrate) via UV-induced graft copolymerization with 4-vinylpyridine (the 4VP-g-SiLK-Si surface) or 1-vinylimidazole (the VIDz-g-SiLK-Si surface! was carried out to promote the adhesion with the electrolessly deposited copper. The surface composition of the graft-copolymerized SiLK-Si substrates was characterized by X-ray photoelectron spectroscopy. The topography of the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces was investigated by atomic force microscopy. The 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces could be activated by PdCl2 in the absence of prior sensitization by SnCl2 (the Sn-free activation process! for the subsequent electroless deposition of copper. The 180degrees-peel adhesion strength of the electrolessly deposited copper on the 4VP-g- SiLK-Si and VIDz-g-SiLK-Si surfaces reaches about 6 and 5 N/cm, respectively. These adhesion strength values were much higher than those of the electrolessly deposited copper on the pristine and Ar plasma-treated SiLK-Si surfaces. The strong adhesion of the electrolessly deposited copper to the VIDz-g-SiLK-Si and 4VP-g- SiLK-Si surfaces was attributed to the synergistic effect of the strong interaction between the pyridine or imidazole functional groups of the grafted polymers with copper atoms, the spatial distribution of the graft chains on the SiLK surface and into the metal matrix, and the fact that the graft chains were covalently tethered on the SiLK surface. (C) 2002 The Electrochemical Society.

Comparison of vacuum ultraviolet irradiation and oxygen plasma treatment as pretreatment for copper seed layer on cycloolefin polymer

Pretreatment to Assure the Copper Filling in Through-Silicon Vias

Enhancing peel strength between liquid crystal polymer and copper with plasma treatment, surface oxidation, and silane coating

Electroless Plating of Copper via a Sn-Free Process on Dielectric SiLK Surface Modified by UV-Induced Graft Copolymerization with 4-Vinylpyridine and 1-Vinylimidazole

Improved Adhesion of Direct Copper Seed Layer by Medium-Vacuum Sputtering Using Vacuum Ultraviolet Light

Improving Wettability of Photo-Resistive Film Surface with Plasma Surface Modification for Coplanar Copper Pillar Plating of IC Substrates

Enhancing Interfacial Bonding Between the Copper Foil and Poly-Ether-ether-ketone Film Via Dual Modification Using UV/ozone and Silane Coupling

Electroless And Eletroplating Copper On Liquid Crystal Polymer (Lcp) For High Frequency Applications

Electroless Plating of Copper on Fluorinated Polyimide Films Modified by Plasma Graft Copolymerization and UV‐induced Graft Copolymerization with 4‐Vinylpyridine

The Effect of Pretreatment on Adhesive Strength of Cu-plated Liquid Crystal Polymer (LCP)

Enhanced Adhesion of Copper Films on Fused Silica Glass Substrate by Plasma Pre-Treatment

A Study on the Oxygen Plasma Treatment on the Peel Adhesion Strength and Solder Wettability of SnBi58 Based Anisotropic Conductive Films

Enhanced adhesion of copper plating to polyether ether ketone based on active oxygen species generated under ultraviolet irradiation

Study on Oxygen Plasma-Based Copper Etching Process

Plasma oxidation as an effective method in etching copper interconnect lines at room-temperature

Investigation of the Behaviors of Various Electroplated Copper Films During CMP

Effect of surface roughness on the adhesion properties of Cu/Cr films on polyimide substrate treated by inductively coupled oxygen plasma

Remote Plasma Enhanced Cyclic Etching of a Cyclosiloxane Polymer Thin Film

Comparison of oxidation resistance of copper treated by beam-line ion implantation and plasma immersion ion implantation

The Influence of Pre-Heat Treatment on Peeling Resistance of Oxide Film of Copper Alloy Lead Frames

Detection and control of the pre-oxidation layer on copper film during direct bonded copper processing