Abstract:The impact of different Ta contents on the mechanical properties and thermoplastic forming ability of in-situ Ta-particle reinforced Zr–Cu–Al–Ni bulk metallic glass composites was studied. The composition (Zr55Cu30Al10Ni5)94Ta6 with the best comprehensive performance was chose for a systematic investigation into its thermoplastic behavior in the supercooled liquid region (SLR), with quantitative analysis conducted by the strain rate sensitivity index and activation volume. The steady-state flow stress and the stress overshoot intensity were augmented with deformation temperature decreasing, strain rate increasing, and the addition of the secondary phase, leading to a transition from Newtonian to non-Newtonian flow regime. The addition of the secondary phase deteriorated the rheological properties of the material. To solve the problem that the Maxwell-Pulse constitutive model showed an inability to accurately describe the steady-state flow process. A modified constitutive relationship, introducing the effect of the volume fraction of Ta particles on viscosity and elastic modulus in the steady-state flow process which was ignored in Maxwell-pulse model, was established. The fitting results of the true stress-strain curves of the modified Maxwell-pulse constitutive model were in better agreement with the experimental date than those of the Maxwell-pulse constitutive model, with higher prediction accuracy. The modified constitutive model well predicted the thermoplastic deformation behavior of (Zr55Cu30Al10Ni5)94Ta6. The influence mechanism of Ta particles on the flow behavior was explained that Ta particles increased the viscosity of amorphous matrix, thereby hindering its flow and ultimately leading to an increase in flow stress.

Improving the glass-forming ability and plasticity of a TiCu-based bulk metallic glass composite by minor Ta doping

Zr-Cu-Ni-Al-Ta Glassy Matrix Composites with Enhanced Plasticity

Effects of Small Amount Ta on the Characteristics of the Zr-Al-Ni-Cu-Ta Bulk Metallic Glass

Thermal Stability and Mechanical Properties of Bulk Glassy Cu-Zr-Ti-(Nb, Ta) Alloys

Effect of Ti addition on properties of Zr54Al10.2Ni9.4Cu26.4 glass forming alloy

Development of Zr-based metallic glass matrix composites with hybrid reinforcing structures

Formation of novel TRIP-ductilized bulk metallic glass composites by manipulating nucleation kinetics via minor alloying

Effects of minor Cu and Si additions on glass forming ability and mechanical properties of Co-Fe-Ta-B Bulk metallic glass

A Modified Maxwell-Pulse Thermoplastic Constitutive Model of In-Situ Ta-particle Reinforced Zr-based Bulk Metallic Glass Composites

Development of High Strength Ni–Cu–Zr–Ti–Si–Sn In-Situ Bulk Metallic Glass Composites Reinforced by Hard B2 Phase

Cu–Hf–Ti–Ag–Ta bulk metallic glass composites and their properties

Modulating the microstructure and mechanical properties of β-Ti-reinforced bulk metallic glass composites by carbon addition

Effects of Cu Addition on the Glass Forming Ability and Corrosion Resistance of Ti-Zr-Be-Ni Alloys

Effects of Tantalum on Microstructure Evolution and Mechanical Properties of High-Nb TiAl Alloys Reinforced by Ti2AlC

Effect of Ta Addition on the Microstructure and Tensile Properties of a Ni-Co Base Superalloy

Enhanced optical, dielectric, and non-Ohmic properties in Ta-doped Bi2/3Cu3Ti4O12 ceramics

Glass forming ability, thermodynamics and mechanical properties of novel Ti–Cu–Ni–Zr–Hf bulk metallic glasses

Effects on Mechanical Properties of Refractory Metal Doped Ti3al Alloy

Metallic glass matrix composite with precipitated ductile reinforcement

Enhanced mechanical properties of dendrite-reinforced Ti-based bulk metallic glass composites by tuning the microstructure

Effects of Cu Additions on Mechanical and Soft-Magnetic Properties of CoFeBSiNb Bulk Metallic Glasses