Abstract:In response to the shortcomings of traditional Gas Tungsten Arc Welding (GTAW), such as low penetration, slow welding speed, and low production efficiency, an Ultra-High-Frequency Adjustable Multi-Pulse Gas Tungsten Arc Welding (UFMP-GTAW) process is proposed. This process more effectively concentrates the temperature distribution of the welding arc. To characterize the arc morphology and its dynamic changes, high-speed photography captured ten images of the UFMP-GTAW welding arc within one cycle. The arc image processing algorithm proposed in the paper was used to study the arc's variation characteristics over one cycle. This algorithm includes binarization, arc segmentation, and edge detection to obtain arc morphology parameters. The arc symmetry algorithm is used to symmetrize the arc images for Abel inversion, resulting in the emission coefficient distribution. Further calculations provide the temperature distribution, electrical conductivity distribution, and current density distribution of the arc. Analysis reveals that changes in arc temperature, electrical conductivity, and current density lag behind changes in current. The temperature of the arc spreads from the central axis to the surrounding arc space. When high-frequency current variations occur, the heat input generated by the current increase takes time to transfer to the entire arc space. Conversely, if the current suddenly decreases, the heat input rapidly diminishes. However, because heat transfer takes time, the arc space remains relatively stable for a short period, making the ultra-high-frequency arc form more stable.

Arc length stable method of GTAW based on adaptive Kalman filter

Adaptive Real-Time Predictive Compensation Control For 6-Dof Serial Arc Welding Manipulator

Research on Arc Length Tracking Control Technology of Tube-Sheet Welding Based on Pulsed TIG

A Theoretical Model of Arc Light Radiation Based on GTA Spectral Diagnosis

Arc length identification based on arc acoustic signals in GTA-WAAM process

Electric Arc Length Control of Circular Seam in Welding Robot Based on Arc Voltage Sensing

Power-arc model based adaptive arc length control of P-GMAW for Al–Mg alloy

Feasibility analysis of standing wave ultrasonic - Axial magnetic field hybrid for controlling GTAW arc characteristics

Research on the Online Detection Method of Fillet Welding Arc Stability Based on the Adaptive Model of Rotating Arc Stability Sensor

Welding Currents Filtering of Compulsively Short Circuiting Transfer in Rotational Arc MAG Welding

Arc force self-adapt control system of invert arc welding machine

Transient characteristics of ultra-high frequency adjustable multi-pulse gas tungsten welding arc

Arc voltage measurements for height control in pulsed arc additive manufacturing

An Innovative Methodology in Narrow Gap GTAW for Alternating Magnetic Field with Synchronous Swing of Filler Wire and Arc

Monitoring process stability in GTA additive manufacturing based on vision sensing of arc length

Stability Analysis and Control of Welding Current for Automatic Rail Narrow-gap Arc Welding System

2D Self-Consistent Modeling of Arc–electrode Interaction in GTAW Using a Finite Volume Method

Arc Length Control Study for Crawl-Type Electrogas Arc Welding Robot

Real-Time Detection and Control of Torch-Height in Waveform Controlled Short-Circuit CO2 Arc Welding

New method of signal processing for weld tracking system of submerged arc welding

Design and construction for theory and method of magnetic-controlled negative pressure GTAW arc model based on multi-physics simulation