Abstract:Additive manufacturing (AM) can build up complex parts in a layer-by-layer manner, which is a kind of novel and flexible production technology. The special manufacturing capability of AM shows great application potential in various fields. However, an open-loop control method cannot guarantee the reliability and repeatability of an AM process. Defects often occur to deteriorate product quality and lead to material and time waste, which hinders the development of AM industry. In this regard, a lot of efforts have been made to make an AM process more controllable. This work proposes an AM control framework that divides the related studies into three feedback loops, including the in-situ monitoring of process defects, fault diagnosis of 3-D printers, and closed-loop control of an AM process. These three loops constitute the inspection and control of AM from the machine level to product level. Specifically, the measurement requirements for monitoring techniques, defect detection, fault diagnosis, and closed-loop control are summarized. The challenges and future trends in realizing a more reliable and repeatable AM process are discussed. Note to Practitioners—This survey is motivated by urgent need to solve product quality problems in additive manufacturing (AM) caused by open-loop control. Three feedback loops can be established to solve them. The first one is defect detection that inspects part quality during fabrication. The second one is the fault diagnosis of a 3-D printer that monitors the health and operation conditions of its actuators. The last one is closed-loop control that improves AM process reliability and repeatability by regulating process variables in real time. These three loops are all based on the feedback signals of in-situ monitoring systems. This paper reviews the related studies and provides guidance for establishing the monitoring systems, performing defect detection and fault diagnosis, and designing closed-loop control systems, which helps realize more reliable and repeatable AM.

Monitoring process stability in GTA additive manufacturing based on vision sensing of arc length

In situ monitoring for numerical controlled manufacturing of large conceptual prototype based on multi-view stitching fusion

Arc voltage measurements for height control in pulsed arc additive manufacturing

A New Approach for Online Monitoring of Additive Manufacturing Based on Acoustic Emission

Feedback control of variable width in gas metal arc-based additive manufacturing

Experimental Study of the Process Failure Diagnosis in Additive Manufacturing Based on Acoustic Emission

Layer width control in robotic pulsed gas tungsten arc additive manufacturing through composite sensing of vision and arc

Arc length identification based on arc acoustic signals in GTA-WAAM process

Research on Automated Defect Classification Based on Visual Sensing and Convolutional Neural Network-Support Vector Machine for GTA-Assisted Droplet Deposition Manufacturing Process

Study of the Mechanism of a Stable Deposited Height During GMAW-Based Additive Manufacturing

Vision based process monitoring in wire arc additive manufacturing (WAAM)

Real-Time Monitoring of AM Processes

Thermal Field Prediction for Welding Paths in Multi-Layer Gas Metal Arc Welding-Based Additive Manufacturing: A Machine Learning Approach

Design of a Multi-sensor Monitoring System for Additive Manufacturing Process

Real-Time Sensing of Sag Geometry During GTA Welding

In-situ Monitoring and Deformation Characterization by Optical Techniques; Part I: Laser-aided Direct Metal Deposition for Additive Manufacturing

Spatiotemporal Monitoring of Melt-Pool Variations in Metal-Based Additive Manufacturing

Controlling grain structure in metallic additive manufacturing using a versatile, inexpensive process control system

Open source arc analyzer: Multi-sensor monitoring of wire arc additive manufacturing

A Data Driven Approach to the Online Monitoring of the Additive Manufacturing Process

Process Monitoring, Diagnosis and Control of Additive Manufacturing