Abstract:As one of the main thermal storage medium of hot dry rock geothermal resources, granite is often subject to frequent thermal shock during the geothermal exploitation. Grasping the response regularity of granite to thermal shock is of great significance to the construction and long-term reliability evaluation of enhanced geothermal system (EGS). This paper investigated the physical and mechanical properties of granite after 0∼20 thermal shocks, and discussed its internal deterioration mechanism. Combined with ANSYS numerical simulation analysis, the mechanical formation mechanism of thermal cracks that lead to the deterioration of physical and mechanical properties of granite was analyzed. The results show that the first thermal shock tends to cause the severest deterioration to both physical and mechanical properties of granite. But when the number of thermal shocks exceeds 10, the deterioration slows down. The increase in contact thermal resistance between mineral particles after cyclic thermal shock results in a decrease in the thermal conductivity of granite. The enhancement of local stress concentration effect and the increase of local bearing capacity difference of granite after cyclic thermal shock result in the decrease of peak strength and the enhancement of ductility characteristics of granite. Due to the existence of thermal cracks, the granite after cyclic thermal shock has one more path to release the energy stored during the loading process than the natural granite. Therefore, the maximum counts at the beginning of crack propagation and the entire crack propagation stage are smaller than that of the natural granite. During the thermal shock, the huge instantaneous temperature difference between the interior and exterior of granite leads to the formation of thermal stress, which increases rapidly and then disappears gradually. As a result, the interior of granite mainly bears the effect of the vertical compressive thermal stress up to 7.59 MPa, while the exterior of granite mainly bears the effect of vertical tensile thermal stress up to 9.18 MPa. The propagation of some pre-existing micro cracks with proper orientation in the interior of granite and the initiation and propagation of secondary thermal cracks on granite surface are identified as two main causes to the deterioration of the physical and mechanical properties of granite after cyclic thermal shock.

A model for characterization of crack closure stage in stress–strain curves of Suizhou granite after exposure to various thermal shocks

Grain-based Coupled Thermo-Mechanical Modeling for Stressed Heterogeneous Granite under Thermal Shock

Permeability Evolution of Rough Fractures in Gonghe Granite Subjected to Cyclic Normal Stress at Elevated Temperatures: Experimental Measurements and Analytical Modeling

Multiscale damage and thermal-stress evolution characteristics of rocks with thermal storage potential under thermal shocks

Study on the Constitutive Model and the Identification of Parameters of Granite Based on the Crack Closure Ratio

Energy Storage Characteristics and Damage Constitutive Model of Thermally Treated Granite: an Experimental Investigation

Mechanism Interpretation of Sub-critical Crack Growth in Beishan Granite Subjected to Cyclic Loading

Mechanical behavior of granite subjected to thermal treatment: insight from experiment and numerical simulation

Thermo-mechanical Coupling Characteristics of Granite under Triaxial Pressures and Ultrahigh Heating Rates

An investigation on the deterioration of physical and mechanical properties of granite after cyclic thermal shock

Cracking process and microstructural characteristics of granite under heating–cooling alternations

Modeling damage evolution in granite under temperature using a thermo-mechanical grain-based FDEM model

Thermal Acoustic Emission Characteristics and Damage Evolution of Granite under Cyclic Thermal Shock

Thermal Stimulation Mechanical Response and Shear Dilatation Predictive Model Improvement of Granite Fractures in an Enhanced Geothermal System

Experimental investigation of thermal cycling effect on fracture characteristics of granite in a geothermal-energy reservoir

Experimental Investigation and Semi-Analytical Simulation of Instantaneous and Time-Dependent Damage Behaviors of Beishan Granite

Effect of water-cooling shock on fracture initiation and morphology of high-temperature granite: Application of hydraulic fracturing to enhanced geothermal systems

Strain-softening model for granite and sandstone based on experimental and discrete element methods

Microcracking behavior and damage mechanism of granite subjected to high temperature based on CT-GBM numerical simulation

Mechanical behaviour of Lac du Bonnet granite after high-temperature treatment using bonded-particle model and moment tensor

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading