Abstract:Investigating the coupling effects of temperature levels and number of heating-water cooling cycles on thermal damage, cracking failure mechanisms, and mechanical responses of HDR (hot dry rock) is a vital issue during the exploitation of geothermal energy. In this study, a large number of granite samples exposed to high temperature treatment (25, 150, 300, 450, 600 °C) with multiple heating and water cooling cycles (1, 5, 10, 15) were carried out micro observations of X-ray diffraction (XRD) and scanning electron microscopy (SEM), and uniaxial compression tests with acoustic emission (AE) signals monitoring. The results show that, as the temperature level or number of heating and water cooling cycles increases, uniaxial compressive strength, elastic modulus, crack damage stress, and the damage index all present a reduction, while the peak axial strain, dilatancy volumetric strain and Poisson’s ratio increase. A genetic algorithm is established to evaluate the coupling influences of temperature and number of heating-water cooling cycles on the uniaxial compressive strength and dilatancy volumetric strain. The AE activities tend to be active due to crack initiation, development and coalescence. For a large temperature level or number of cycles, the AE signals remain active during the whole deformation process, while increase rate of the accumulated AE counts with time gradually slows down. The granites undergo a typical splitting failure mode, characterized by several tensile cracking planes at a low temperature or number of cycles, but present complicated crack networks of a turtle shape with increasing temperature or number of cycles, resulting in a larger fractal dimension of the induced surface cracks. The failure mechanism of rock gradually transfers from brittleness-dominated to ductility-dominated due to accumulated thermal damage. Then, the micro thermal damage mechanism of uncompressed granites is analyzed through microscopic observations of XRD and SEM. A power function is proposed to describe the relations between longitudinal wave velocity and uniaxial compressive strength. With increasing temperature or number of cycles, the maximum diffraction intensity of quartz decreases by 25.82%–38.89% and 13.42%–31.93%, respectively, and the micro thermal defects gradually develop, resulting in weakened macro bearing capacity.Article highlightsHeating and water cooling cycles effects on mechanical properties of granites.Heating and water cooling cycles effects on micro thermal damage and failure mechanisms of granites.Micro mechanisms for the macro strength responses.

Experimental investigation of thermal cycling effect on fracture characteristics of granite in a geothermal-energy reservoir

Effect of heating–water cooling cycle treatment on the pore structure and shear fracture characteristics of granite

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Effects of high temperature and thermal cycles on fracture surface's roughness of granite: An insight on 3D morphology

An investigation on the deterioration of physical and mechanical properties of granite after cyclic thermal shock

Experimental study on the nonlinear flow characteristics of fractured granite after high-temperature cycling

Cracking process and microstructural characteristics of granite under heating–cooling alternations

Analysis of physical and mechanical properties of granite under different cooling methods under high-temperatures thermal cycles

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Effect of Cyclic Thermal Shock on Granite Pore Permeability

Changes in the Thermodynamic Properties of Alkaline Granite after Cyclic Quenching Following High Temperature Action

Investigating the effect of water quenching cycles on mechanical behaviors for granites after conventional triaxial compression

Experimental Study on the Influence of Real-Time Temperature Cycling on Physical and Mechanical Properties of Granite

Experimental and numerical simulation study on the evolution of mechanical properties of granite after thermal treatment

The role of multiple heating and water cooling cycles on physical and mechanical responses of granite rocks

Thermal Acoustic Emission Characteristics and Damage Evolution of Granite under Cyclic Thermal Shock

Experimental Investigation on Physical and Mechanical Properties of Granite Subjected to Cyclic Heating and Liquid Nitrogen Cooling

Effect of Cyclic Impact on the Dynamic Behavior of Thermally Shocked Granite

Experimental study on mechanical properties and evolution of fracture failure of granite considering initial temperature damage and prefabricated fissure length

Experimental investigation on physical and mechanical properties of thermal cycling granite by water cooling