Abstract:High temperature is an important factor affecting the mechanical properties and crack propagation behavior of granite. In this study, the mechanical properties and thermal damage mechanism of granite after high temperature are studied experimentally. Subsequently, based on the content and distribution of granite minerals, combined with computed tomography (CT) technique and grain-based model (GBM) modeling method, a novel discrete element numerical model considering real mineral distribution is introduced, and the rationality of the method is verified by experiments. On this basis, the mechanical behavior, crack propagation behavior and failure mode of granite after high temperature are studied. The results show that 450 °C is the thermal damage threshold of granite in this study. When T ≤ 450 °C, the development of thermally-induced microcracks is not significant, the P-wave velocity of granite decreases slightly, and the change of mechanical properties is not obvious. When T > 450 °C, the thermally-induced microcrack propagates rapidly, the fracture network and fracture zone are formed locally in the specimen, and the P-wave velocity and mechanical properties of granite deteriorate significantly. The simulation results show that the number of thermally-induced microcracks in granite specimens is positively correlated with temperature, and the tensile cracks are mainly at the mineral boundary, and the thermal stress concentration between mineral particles is the main cause of thermally-induced microcracks. After temperature treatment, there are mainly tensile cracks in granite specimens under uniaxial compression, and the orientation of tensile cracks tends to be isotropic with the increase of temperature. When T < 600 °C, the crack distribution and failure mode of granite specimens under uniaxial compression are consistent with those at room temperature. When T ≥ 600 °C, thermally-induced microcracks begin to dominate the uniaxial compression failure process, and granite specimens begin to show ductile failure characteristics, and the brittle-plastic transition was observed between 600 °C and 750 °C.

Experimental study on mechanical properties and evolution of fracture failure of granite considering initial temperature damage and prefabricated fissure length

Tensile Microcracking Behavior of Granites after High Temperature Treatment by Considering the Effect of Grain Size and Mineralogical Composition

Experimental investigation on the mechanical properties of thermally damaged granite specimens containing pre‐existing holes

Experiment Study on Shear Behavior and Properties of Granite Fractures under Real-time High-temperature Conditions

Thermal effects on prediction accuracy of dense granite mechanical behaviors using modified maximum tangential stress criterion

The Influence of Temperatures on the Mechanical Properties and Fracture Behavior of Rocks under Mixed Mode I/II Loading

A Micromechanical-Based Failure Criterion for Rocks after High-Temperature Treatment

Experiment and numerical simulation study of dynamic mechanical behavior of granite specimen after high temperature treatment

Experimental Study on Damage and Fracture Characteristics of Beishan Granite Subjected to High-temperature Treatment with DIC and AE Techniques

The Sequence of Heating and Loading Affects Shear Properties of Granite Fractures Under High Temperature

Modeling damage evolution in granite under temperature using a thermo-mechanical grain-based FDEM model

Experimental investigation on the macro- and micromechanical properties of water-cooled granite at different high temperatures

Influence of microwave irradiation and water-based cooling on the fracturing behavior and failure mode transition of CSTBD granite

Analysis of physical and mechanical behaviors and microscopic mineral characteristics of thermally damaged granite

Laboratory Investigation on Physical and Mechanical Behaviors of Granite after Heating and Different Cooling Rates

Mechanical Properties and Crack Propagation Behavior of Granite After High Temperature Treatment Based on a Thermo-Mechanical Grain-Based Model

Damage evolution and acoustic emission characteristics of hard rock under high temperature thermal cycles

Experimental investigation of mixed mode I-II fracture property of thermally treated granite under dynamic loading

Experimental investigation on damage characteristics and fracture behaviors of granite after high temperature exposure under different strain rates

Investigation of the fracture characteristics of granite and green sandstone under different thermal treatments

Experimental research on the mechanical properties and energy transfer of fractured granite under triaxial loading