Abstract:In this study, we develop a non-equiatomic Co2CrNi1.5Al0.25Ti0.25 quinary medium-entropy alloy (MEA). The heterogeneous grain structure (HGS) (comprising residual deformed grains, micro-sized recrystallized grains and nano-sized recrystallized grains) and heterogeneous precipitation (HP) of the L12 phase corresponding to different kinds of grain structures are simultaneously introduced into the alloy by the well-designed thermomechanical processing. The alloy exhibits an ultra-high yield stress (<math>σy</math>) of 1.73 GPa, ultimate tensile stress (<math>σu</math>) of 1.89 GPa and remarkable total elongation (<math>εte</math>) up to 16.0% at 293 K, as well as ultra-high <math>σy</math> up to 2.02 GPa, <math>σu</math> up to 2.31 GPa and excellent <math>εte</math> up to 21.2% at 77 K. The synergy of multiple hardening mechanisms, mainly including back-stress hardening, precipitation hardening and pre-existed dislocation hardening contributes to the ultra-high <math>σy</math> at 293 K and 77 K. The HGS promotes the continuously increased geometrically necessary dislocations (GNDs) density, which, combined with the nano-spaced stacking fault (SF) networks, leads to the outstanding three-stage work-hardening behaviors during tensile tests at 293 K and 77 K. The simultaneous introduction of HGS and HP into this newly-developed MEA without brittle intermetallic phase, is a new effective method in designing high-performance alloys applied at both ambient and cryogenic temperatures.

A novel Ti45V45(AlCrMo)10 lightweight medium-entropy alloy with outstanding mechanical properties

An as-cast Ti-V-Cr-Al light-weight medium entropy alloy with outstanding tensile properties

Lightweight Al 3 Ti-based medium-entropy alloys with well-balanced strength and ductility

Remarkable Enhanced Mechanical Properties of TiAlCrNbV Medium-Entropy Alloy with Zr Additions

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Strain Hardening Behavior of Ti-Rich Light-Weight Medium Entropy Alloys with Excellent Strength and Plasticity Synergy

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

Lightweight AlCuFeMnMgTi High Entropy Alloy with High Strength-to-Density Ratio Processed by Powder Metallurgy

Ultrastrong and Ductile Metastable Fe-rich Medium-Entropy Alloy with High-Density Nanolamellar L12 Precipitates

Enhancing the Strength and Ductility Synergy of Lightweight Ti-Rich Medium-Entropy Alloys through Ni Microalloying

Novel BCC Ti-Al-Nb-Zr Medium-Entropy Alloys with Ultrahigh Specific Strength and Ductility

Heterogeneous Precipitation Strengthened Non-Equiatomic NiCoFeAlTi Medium Entropy Alloy with Excellent Mechanical Properties

Heterogeneous-structure-induced ultrahigh strength and ductility in a metastable dual-phase Fe60Cr15Ni16Al9 medium entropy alloy

Mechanical properties and microstructural evolution of a novel (FeCoNi)86.93Al6.17Ti6.9 medium entropy alloy fabricated via powder metallurgy technique

A Low-Cost Lightweight Entropic Alloy with High Strength

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)

Microstructure and mechanical properties of the (TiZrV)100-xAlx medium-entropy alloys

Lamellar-structured low-cost FeMn0.7Ni0.6Cr0.4Al0.3 high entropy alloy with excellent tensile properties

High specific yield strength TiZrAlNbV high-entropy alloys via coherent nanoprecipitation strengthening

A Novel As-Cast Precipitation-Strengthened Al 0.5 V 0.1 FeCrMnNi 0.9 High-Entropy Alloy with High Strength and Plasticity