Abstract:In this study we developed a novel (TRIP+TWIP) high entropy alloy (HEA) with high specific strength and large ductility. First, by controlling the atomic constitution of the 3d transition metals (Cr, Mn, Fe, Co, and Ni), we designed a light-weight TRIP-assisted dual-phase HEA with a non-equiatomic composition of Cr22Mn6Fe40Co26Ni6, which exhibited 5% lighter density than the Cantor HEA. Secondly, we systematically added Al (a lightweight element (2.7 g/cm3), which has a large atomic size misfit with 3d transition metals, and Ferrite stabilizer) up to 5 at.% in Cr22Mn6Fe40Co26Ni6 HEA. With increasing Al content, the phase constitution of the alloy changed from a dual-phase of FCC and HCP (0 to 2.0 at.%) to a FCC single-phase (2.5 to 3.5 at.%), to a dual-phase of FCC and BCC (4.0 to 5.0 at.%). In particular, the (Cr22Mn6Fe40Co26Ni6)97.5Al2.5 HEA with the FCC single-phase exhibited a large Hall-Petch coefficient and relatively lower thermal conductivity due to its three times larger atomic size mismatch (δ) than the Cantor HEA, which causes the superior solid solution strengthening effect. Furthermore, the (Cr22Mn6Fe40Co26Ni6)96Al4.0 HEA, a boundary composition of BCC precipitation in the FCC phase, exhibited a 10% higher specific strength than the Cantor HEA as well as 50% larger strain, due to the unique TRIP and TWIP complex deformation mechanism. This result shows that the addition of Al in Cr22Mn6Fe40Co26Ni6 HEA can result not only in greater chemical complexity due to the multicomponent high entropy compositions, but also microstructural complexity due to the increase in competing crystalline phases. The confusion effect caused by both complexities lets the alloy overcome the trade-off relationship among conflicting intrinsic properties, such as strength versus ductility (or density). Consequently, these results pave the way for a new design strategy of a novel (TRIP+TWIP) HEA with high specific strength and large ductility.

Lightweight AlCuFeMnMgTi High Entropy Alloy with High Strength-to-Density Ratio Processed by Powder Metallurgy

Light Weight MnTiAlNiFe High-Entropy Alloy (LWHEA) Fabricated by Powder Metallurgy Process: Mechanical, Microstructure, and Tribological Properties

A Light-Weight High-Entropy Alloy Al 20 Be 20 Fe 10 Si 15 Ti 35

First principles-based design of lightweight high entropy alloys

Tailoring Compressive Strength and Absorption Energy of Lightweight Multi-Phase AlCuSiFeX (X = Cr, Mn, Zn, Sn) High-Entropy Alloys Processed via Powder Metallurgy

A novel Ti45V45(AlCrMo)10 lightweight medium-entropy alloy with outstanding mechanical properties

Lightweight, Ultrastrong and High Thermal-Stable Eutectic High-Entropy Alloys for Elevated-Temperature Applications

Structure and properties of Fe40Mn20Cr20Ti10Al10 high-entropy alloy fabricated by mechanical alloying and spark plasma sintering

Design and mechanosynthesis of Low-Weight High-Entropy Alloys with hydrogen storage potential properties

Microstructure and Properties of NiCoCrAlTi High Entropy Alloy Prepared Using MA-SPS Technique

A high-density non-equiatomic WTaMoNbV high-entropy alloy: Alloying behavior, microstructure and mechanical properties

Composition Design and Tensile Properties of Additive Manufactured Low Density Hf-Nb-Ta-Ti-Zr High Entropy Alloys Based on Atomic Simulations

Nanostructured Al–Ti–Fe–Mn–Ni High-Entropy Alloy by Mechanical Alloying: Synthesis and Characterization

A New Type of High Entropy Alloy Composite Fe18Ni23Co25Cr21Mo8WNb3C2 Prepared by Mechanical Alloying and Hot Pressing Sintering

Microstructure and mechanical properties of CoCrFeNiTa high entropy alloy prepared by mechanical alloying and spark plasma sintering

Development of Light-Weight TRIP/TWIP FCC High Entropy Alloy with High Specific Strength and Large Ductility

Ultra Strong FCC Structured Ni8Cr4Co4Fe6W2 High Entropy Alloys with High Strength and Ductility by Laser Powder Bed Fusion

An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

Lightweight Al 3 Ti-based medium-entropy alloys with well-balanced strength and ductility

Strengthening the mechanical properties and wear resistance of CoCrFeMnNi high entropy alloy fabricated by powder metallurgy