Abstract:In this study, we develop a non-equiatomic Co2CrNi1.5Al0.25Ti0.25 quinary medium-entropy alloy (MEA). The heterogeneous grain structure (HGS) (comprising residual deformed grains, micro-sized recrystallized grains and nano-sized recrystallized grains) and heterogeneous precipitation (HP) of the L12 phase corresponding to different kinds of grain structures are simultaneously introduced into the alloy by the well-designed thermomechanical processing. The alloy exhibits an ultra-high yield stress (<math>σy</math>) of 1.73 GPa, ultimate tensile stress (<math>σu</math>) of 1.89 GPa and remarkable total elongation (<math>εte</math>) up to 16.0% at 293 K, as well as ultra-high <math>σy</math> up to 2.02 GPa, <math>σu</math> up to 2.31 GPa and excellent <math>εte</math> up to 21.2% at 77 K. The synergy of multiple hardening mechanisms, mainly including back-stress hardening, precipitation hardening and pre-existed dislocation hardening contributes to the ultra-high <math>σy</math> at 293 K and 77 K. The HGS promotes the continuously increased geometrically necessary dislocations (GNDs) density, which, combined with the nano-spaced stacking fault (SF) networks, leads to the outstanding three-stage work-hardening behaviors during tensile tests at 293 K and 77 K. The simultaneous introduction of HGS and HP into this newly-developed MEA without brittle intermetallic phase, is a new effective method in designing high-performance alloys applied at both ambient and cryogenic temperatures.

A novel quaternary equiatomic Ti-Zr-Nb-Ta medium entropy alloy (MEA)

Experimental and DFT Investigations of AlNbTiVZr High Entropy Alloys with Excellent Mechanical Properties

Remarkable Enhanced Mechanical Properties of TiAlCrNbV Medium-Entropy Alloy with Zr Additions

Structure and properties of Ti-rich Ti–Zr–Nb–Mo medium-entropy alloys

Composition Design and Tensile Properties of Additive Manufactured Low Density Hf-Nb-Ta-Ti-Zr High Entropy Alloys Based on Atomic Simulations

Achieving superior mechanical properties and biocompatibility in an O-doping TiZrNb medium entropy alloy

Lightweight Al 3 Ti-based medium-entropy alloys with well-balanced strength and ductility

Enhancing the Strength and Ductility Synergy of Lightweight Ti-Rich Medium-Entropy Alloys through Ni Microalloying

Design and properties of novel Ti–Zr–Hf–Nb–Ta high-entropy alloys for biomedical applications

An additively manufactured precipitation hardening medium entropy alloy with excellent strength-ductility synergy over a wide temperature range

Development of non-equiatomic Bio-HEAs based on TiZrNbTa-(Mo and Mn)

Development of an equiatomic octonary TiNbTaZrMoHfWCr super-high-entropy alloy for biomedical applications

Mechanical, corrosion, and wear properties of biomedical Ti–Zr–Nb–Ta–Mo high entropy alloys

Ti-Zr-Nb-Ta-Sn Medium-Entropy Alloys with Excellent Properties as Potential Biomaterials

Design of ultrastrong but ductile medium-entropy alloy with controlled precipitations and heterogeneous grain structures

A novel cobalt-free FeMnCrNi medium-entropy alloy with exceptional yield strength and ductility at cryogenic temperature

A novel Ti45V45(AlCrMo)10 lightweight medium-entropy alloy with outstanding mechanical properties

Deformation Twinning in Ti48.9Zr32.0Nb12.6Ta6.5 Medium Entropy Alloy

Preparation of TiNbTaZrMo high-entropy alloy with tunable Young's modulus by selective laser melting

High-strength and energetic Al2Ti6Zr2Nb3Ta3 high entropy alloy containing a cuboidal BCC/B2 coherent microstructure

Microstructure and Mechanical Properties of Medium-Entropy Alloys with a High-Density Η-D024 Phase