Measuring the global mechanical properties of the human thorax: Costo-vertebral articulation

Carola Lebschy,Andreas Gradischar,Wolfgang Krach,Marcell Krall,Melanie Fediuk,Anja Krall,Jörg Lindenmann,Freyja Smolle-Jüttner,Niels Hammer,Benoît Beyer,Josef Smolle,Ute Schäfer

DOI: https://doi.org/10.1016/j.jbiomech.2023.111923

IF: 2.4

2024-01-07

Journal of Biomechanics

Abstract:Biomechanical simulation of the human thorax, e.g. for 3D-printed rib implant optimisation, requires an accurate knowledge of the associated articulation and tissue stiffness. The present study is focusing on determining the stiffness of the costo-vertebral articulations. Specimens of rib segments including the adjacent thoracic vertebrae and ligaments were obtained from two human post-mortem bodies at four different rib levels. The rib samples were loaded with a tensile force in the local longitudinal, sagittal and transverse direction and the resulting displacement was continuously measured. The moment-angle response of the rib articulations was also determined by applying a load at the rib end in the cranial – caudal direction and measuring the resulting displacement. The torsional load response of the costo-vertebral articulations at an applied moment between -0.1 Nm and 0.1 Nm corresponded to a median range of motion of 13.2° (6.4° to 20.9°). An almost uniform stiffness was measured in all tensile loading directions. The median displacement at the defined force of 28 N was 1.41 mm in the longitudinal, 1.55 mm in the sagittal, and 1.08 mm in the transverse direction. The measured moment-angle response of the costo-vertebral articulation is in line with the data from literature. On the contrary, larger displacements in longitudinal, sagittal and transverse directions were measured compared to the values found in literature.

engineering, biomedical,biophysics