Abstract:Objective: The current state of the art human body models (HBMs) underpredict the number of fractured ribs. Also, it has not been shown that the models can predict the fracture locations. Efforts have been made to create subject specific rib models for fracture prediction, with mixed results. The aim of this study is to evaluate if subject-specific finite element (FE) rib models, based on state-of-the-art clinical CT data combined with subject-specific material data, can predict rib stiffness and fracture location in anterior-posterior rib bending.Method: High resolution clinical CT data was used to generate detailed subject-specific geometry for twelve FE models of the sixth rib. The cortical bone periosteal and endosteal surfaces were estimated based on a previously calibrated cortical bone mapping algorithm. The cortical and the trabecular bone were modeled using a hexa-block algorithm. The isotropic material model for the cortical bone in each rib model was assigned subject-specific material data based on tension coupon tests. Two different modeling strategies were used for the trabecular bone.The capability of the FE model to predict fracture location was carried out by modeling physical dynamic anterior-posterior rib bending tests. The rib model predictions were directly compared to the results from the tests. The predicted force-displacement time history, strain measurements at four locations, and rotation of the rib ends were compared to the results from the physical tests by means of CORA analysis. Rib fracture location in the FE model was estimated as the position for the element with the highest first principle strain at the time corresponding to rib fracture in the physical test.Results: Seven out of the twelve rib models predicted the fracture locations (at least for one of the trabecular modeling strategies) and had a force-displacement CORA score above 0.65. The other five rib models, had either a poor force-displacement CORA response or a poor fracture location prediction. It was observed that the stress-strain response for the coupon test for these five ribs showed significantly lower Young's modulus, yield stress, and elongation at fracture compared to the other seven ribs.Conclusion: This study indicates that rib fracture location can be predicted for subject specific rib models based on high resolution CT, when loaded in anterior-posterior bending, as long as the rib's cortical cortex is of sufficient thickness and has limited porosity. This study provides guidelines for further enhancements of rib modeling for fracture location prediction with HBMs.

A generic detailed multibody model for simulating thoracic spine and ribcage kinematics

A patient-specific multibody kinematic model for representation of the scoliotic spine movement in frontal plane of the human body

Flexible Robotic Spine Actuated by Shape Memory Alloy

Prediction of trunk muscle activation and spinal forces in adolescent idiopathic scoliosis during simulated trunk motion: A musculoskeletal modelling study

Musculoskeletal full-body models including a detailed thoracolumbar spine for children and adolescents aged 6-18 years

A Biomechanical Model of the Scapulothoracic Joint to Accurately Capture Scapular Kinematics during Shoulder Movements

Anatomically Detailed Simulation of Human Torso

Data Repository of Finite Element Models of Normal and Deformed Thoracolumbar Spine

A multibody simulation of the spine for objectification of biomechanical quantities after VBT: a proof of concept and description of baseline data

Dataset of Finite Element Models of Normal and Deformed Thoracolumbar Spine

Reconstruction of a Human Spine Curve in the Sagittal Plane From the Measured Contour of the Human Back

Anatomical prior based vertebra modelling for reappearance of human spines

Twente Spine Model: A thorough investigation of the spinal loads in a complete and coherent musculoskeletal model of the human spine

Accounting for Biomechanical Measures from Musculoskeletal Simulation of Upright Posture Does Not Enhance the Prediction of Curve Progression in Adolescent Idiopathic Scoliosis

Construction of the Adjusted Scoliosis 3D Finite Element Model and Biomechanical Analysis under Gravity

Comparison of Two Scaling Approaches for the Development of Biomechanical Multi-Body Human Models

Musculoskeletal spine modeling in large patient cohorts: how morphological individualization affects lumbar load estimation

Predicted vs. measured paraspinal muscle activity in adolescent idiopathic scoliosis patients: EMG validation of optimization-based musculoskeletal simulations

Design Improvements and Validation of a Novel Fully 3D Printed Analogue Lumbar Spine Motion Segment

A Novel Skeleton-based Model with Spine for 3D Human Pose Estimation

Detailed subject-specific FE rib modeling for fracture prediction