Abstract:The ISOLDE facility at CERN is one of the first facilities in the world dedicated to the production of the radioactive ion beams (RIB) and during all its working time underwent several upgrades. The goal of the latest proposed upgrade, 'The High Intensity and Energy ISOLDE' (HIE-ISOLDE), is to provide a higher performance facility in order to approximate it to the level of the next generation ISOL facilities, like EURISOL. The HIE-ISOLDE aims to improve significantly the quality of the produced RIB and for this reason the increasing of the primary beam power is one of the main objectives of the project. An increase in the nominal beam current (from 2 to 6 μA proton beam intensity) and energy (from 1.4 GeV to 2 GeV) of the primary proton beam will be possible due to the upgrade of CERN's accelerator infrastructure. The current upgrade means reassessment of the radiation protection and the radiation safety of the facility. However, an evaluation of the existing shielding configuration and access restrictions to the experimental and supply areas must be carried out. Monte Carlo calculations were performed in order to evaluate the radiation protection of the facility as well as radiation shielding assessment and design. The FLUKA-Monte Carlo code was used in this study to calculate the ambient dose rate distribution and particle fluxes in the most important areas, such as the experimental hall of the facility. The results indicate a significant increase in the ambient dose equivalent rate in some areas of the experimental hall when an upgrade configuration of the primary proton beam is considered. Special attention is required for the shielding of the target area once it is the main and very intensive radiation source, especially under the upgrade conditions. In this study, the access points to the beam extraction and beam maintenance areas, such as the mass separator rooms and the high voltage room, are identified as the most sensitive for the experimental hall from the radiation protection point of view.

Conceptual design report on a charge breeder for HIE-ISOLDE

High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications

Conceptual design of 5 MW-NBI injector for HL-2 M tokamak

Status of the HIE-ISOLDE project at CERN

Evaluation of the radiation field and shielding assessment of the experimental area of HIE-ISOLDE

Design Study of Primary Ion Provider for Relativistic Heavy Ion Collider Electron Beam Ion Source

Conceptual Design of an 800 Mev High Power Proton Driver

Design Studies on a 500kv DC Gun Photo-Injector for the BXERL Test Facility

The Preliminary Conceptual Design of the High-Power Neutron Converter for BISOL

Design and thermal simulations towards a high intensity radioactive ion source for ISOL@MYRRHA

Conceptual Design Report A Compact Photon Source

Storage ring at HIE-ISOLDE

eRHIC - Accelerator and detector design studies

HighNESS Conceptual Design Report: Volume I

Charge Breeding of Radioactive Ions

Updated physics design of the DAEdALUS and IsoDAR coupled cyclotrons for high intensity H2+ beam production

Method for estimating charge breeder ECR ion source plasma parameters with short pulse 1+ injection

An RFQ Direct Injection Scheme for the IsoDAR High Intensity $\mathrm{H}_2^+$ Cyclotron

eRHIC - A precision electron-proton/ion collider facility at Brookhaven National Laboratory

A high-intensity superconducting H+ 3 cyclotron for isotope production

Overview of Theory and Modeling in the Heavy Ion Fusion Virtual National Laboratory