Abstract:From the stripping points, the high intensity proton beam of a compact cyclotron travels through the fringe field area of the machine to the combination magnet. Starting from there the beams with various energy is transferred to the switching magnet for distribution to the beam line targets. In the design of the extraction and transport system for the compact proton cyclotron facilities, such as the 70MeV in France and the 100MeV in China, the space charge effect as the beam crosses the fringe field has not been previously considered; neither has the impact on transverse beam envelope coupled from the longitudinal direction. Those have been concerned much more with the higher beam-power because of the beam loss problem. In this paper, based on the mapping data of 70MeV cyclotron including the fringe field by BEST Cyclotron Inc (BEST) and combination magnet field by China Institute of Atomic Energy (CIAE), the beam extraction and transport are investigated for the 70MeV cyclotron used on the SPES project at Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Legnaro (INFN–LNL). The study includes the space charge effect and longitudinal and transverse coupling mentioned above, as well as the matching of beam optics using the beam line for medical isotope production as an example. In addition, the designs of the ±45° switching magnets and the 60° bending magnet for the extracted beam with the energy from 35MeV to 70MeV have been made. Parts of the construction and field measurements of those magnets have been done as well. The current result shows that, the design considers the complexity of the compact cyclotron extraction area and fits the requirements of the extraction and transport for high intensity proton beam, especially at mA intensity levels.

Charge Breeding of Radioactive Ions

Physics design of phase and energy adjustment for heavy ion beam of the same mass with two-charge state on BISOL

Simulations of charge-breeding processes in ECRIS

High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications

Method for estimating charge breeder ECR ion source plasma parameters with short pulse 1+ injection

Method for estimating charge breeder ECR ion source plasma parameters with short pulse 1+ injection of metal ions

High Intensity Proton Beam Transportation Through Fringe Field of 70 MeV Compact Cyclotron to Beam Line Targets

Production of High-Intensity, Highly Charged Ions

First two operational years of the electron-beam ion trap charge breeder at the National Superconducting Cyclotron Laboratory

Diagnostics of charge breeder electron cyclotron resonance ion source plasma with consecutive transients method

Conceptual design report on a charge breeder for HIE-ISOLDE

Design Study of Multi-Charge Low Energy Beams Transport for BISOL Post Accelerator

Charge Accretion Rate and Injection Radius of Ionized-Induced Injections in Laser Wakefield Accelerators

CW RFQ design and investigation for multi-charge-state acceleration of radioactive beams from BISOL

Production of rare isotope beams at the Texas A&M University Cyclotron Institute

Design of a CW BISOL RFQ for Three Kinds of High-Charge-State Ions Simultaneous Acceleration

Stable radiation field positron acceleration in a micro-tube

Charge Change-Induced Beam Losses under Dynamic Vacuum Conditions in Ring Accelerators

Experimental Studies on the Acceleration of Positive & Negative Ions with a Heavy Ion ISR RFQ

Beam Simulation Studies of ECR Beam Extraction and Low Energy Beam Transport for FRIB.