Abstract:The ISOLDE facility at CERN is one of the first facilities in the world dedicated to the production of the radioactive ion beams (RIB) and during all its working time underwent several upgrades. The goal of the latest proposed upgrade, 'The High Intensity and Energy ISOLDE' (HIE-ISOLDE), is to provide a higher performance facility in order to approximate it to the level of the next generation ISOL facilities, like EURISOL. The HIE-ISOLDE aims to improve significantly the quality of the produced RIB and for this reason the increasing of the primary beam power is one of the main objectives of the project. An increase in the nominal beam current (from 2 to 6 μA proton beam intensity) and energy (from 1.4 GeV to 2 GeV) of the primary proton beam will be possible due to the upgrade of CERN's accelerator infrastructure. The current upgrade means reassessment of the radiation protection and the radiation safety of the facility. However, an evaluation of the existing shielding configuration and access restrictions to the experimental and supply areas must be carried out. Monte Carlo calculations were performed in order to evaluate the radiation protection of the facility as well as radiation shielding assessment and design. The FLUKA-Monte Carlo code was used in this study to calculate the ambient dose rate distribution and particle fluxes in the most important areas, such as the experimental hall of the facility. The results indicate a significant increase in the ambient dose equivalent rate in some areas of the experimental hall when an upgrade configuration of the primary proton beam is considered. Special attention is required for the shielding of the target area once it is the main and very intensive radiation source, especially under the upgrade conditions. In this study, the access points to the beam extraction and beam maintenance areas, such as the mass separator rooms and the high voltage room, are identified as the most sensitive for the experimental hall from the radiation protection point of view.

Design and thermal simulations towards a high intensity radioactive ion source for ISOL@MYRRHA

Advanced Liquid-Metal Thermal-Hydraulic Research for MYRRHA

Cryogenic system for the MYRRHA superconducting linear accelerator

MYRRHA, a Pb-Bi experimental ADS: specific approach to radiation protection aspects

Evaluation of the radiation field and shielding assessment of the experimental area of HIE-ISOLDE

MYRRHA: A Flexible and Fast-Spectrum Irradiation Facility

SRF programs towards High-Q/High-G cavities in IJCLab

Radiation transport calculations for the European Spallation Source accelerator environment

2D electromagnetic simulations of RF heating via inductive coupling in the SPIDER device

Status of the HIE-ISOLDE project at CERN

Design of the EURISOL multi-MW target assembly: radiation and safety issues

Development of high intensity neutron source at the European Spallation Source

High Performance Charge Breeder for HIE-ISOLDE and TSR@ISOLDE Applications

Simulation and design of an IPHI-based neutron source, first steps toward SONATE

Contribution of the European Commission to a European Strategy for HLW Management Through Partitioning & Transmutation

High Power Cyclotrons: The Bridge Between Beyond the Standard Model Physics, Computation, and Medical Applications

A facility for radiation hardness studies based on a medical cyclotron

Beam Dynamics simulations for ERDC project -- SRF linac for industrial use

Design study for medium energy high intensity proton accelerator

Storage ring at HIE-ISOLDE

Innovations in the Next Generation Medical Accelerators for Therapy with Ion Beams