Abstract:Self-regulating compact nuclear microreactor concepts are being developed for use in space and at terrestrial remote sites. The current emphasis is on the development of high-assay low-enriched uranium–fueled reactors that rely on metal hydrides to achieve size, specific weight, and power parity with the legacy highly enriched uranium systems. In the case of terrestrial applications, metal hydride–moderated systems can also improve economic feasibility. The neutronic design of metal hydride–moderated high-temperature reactor cores is complicated by the need to optimize and synchronize delayed spatial and temporal reactivity feedback from outer reflectors. Zebra is a thermal spectrum proof-of-principle core designed for demonstrating the reactor dynamics of hydride-moderated spectrum reactors, which is studied in this work. The reactor, including the fuel, yttrium hydride moderator, heat pipes, central control rod, structural supports, and the beryllium reflector, weighs ~425 kg. The design shares several features common with nuclear criticality test geometries routinely used in National Criticality Experiments Research Center (NCERC) experiments such that a prototype of the reactor can be readily assembled and tested. Additional features, such as heat pipes and hydrogen barrier clads, were added to minimize the potential for large thermal gradients that in turn could induce hydrogen loss or structural deformation during extended periods of operation at ~1000 K. In this work, normal and off-normal state performance of the Zebra rector core was analyzed using MCNP and Abaqus-based Reactor Multiphysics (MARM) software. Up-to-date nuclear, thermal, and mechanical performance data were used to characterize the performance of the yttrium hydride moderator. Steady-state analyses established that at a postulated power between 20 and 50 kW(thermal), the reactor core is nearly isothermal irrespective of quality of conduction coupling between heat pipes and fuel plates. Additionally, heat pipe failure modes, including simultaneous failure of all heat pipes in a quadrant of a reactor, were examined to bound the maximum credible temperature spike in the reactor core for extreme off-normal operating conditions. Finally, we detail the startup design challenges for the hydride-moderated thermal core, and analyze load-following cases to achieve "self-regulation" using the Dynamic Analysis of Reactor Transients module of MARM. The reactor is self-regulating with a reactivity temperature coefficient of ~−1 pcm/K at the operating point based solely on nuclear cross-section feedback. It can be further strengthened using additional spectral shift neutron absorbers and incorporating design features that enhance core expansion. This work captures that hydride-moderated systems are feasible for various self-regulating applications once systematic checks are verified in order to achieve a well-engineered core design.

MYRRHA: A Flexible and Fast-Spectrum Irradiation Facility

MYRRHA, a Pb-Bi experimental ADS: specific approach to radiation protection aspects

Contribution of the European Commission to a European Strategy for HLW Management Through Partitioning & Transmutation

Cryogenic system for the MYRRHA superconducting linear accelerator

Advanced Liquid-Metal Thermal-Hydraulic Research for MYRRHA

Design and thermal simulations towards a high intensity radioactive ion source for ISOL@MYRRHA

A facility for radiation hardness studies based on a medical cyclotron

The Laser-hybrid Accelerator for Radiobiological Applications

An accelerator facility for intermediate energy proton irradiation and testing of nuclear materials

Tests at 2K of the beta 0.35 spoke cryomodule prototype with the MTCA.4-based Low Level RF system prototype for the MYRRHA R&D

SRF programs towards High-Q/High-G cavities in IJCLab

Design and commissioning of a high-level control system for a medical isochronous cyclotron

A Hybrid Design of Project-X

A Dual-Beam Irradiation Facility for a Novel Hybrid Cancer Therapy

Calculations of neutron fluxes and isotope conversion rates in a thorium-fuelled MYRRHA reactor, using GEANT4 and MCNPX, Nuclear Engineering and Design

Startup and Multiphysics Analysis of a Compact kW-Class Thermal Spectrum Microreactor

MOSARIX: Progress Report

MeV Per Nucleon Ion Irradiation of Nuclear Materials with High Energy Synchrotron X-ray Characterization

Potential of the CLARA test facility for VHEE radiotherapy research

Innovations in the Next Generation Medical Accelerators for Therapy with Ion Beams

The CERN Super Proton Synchrotron As a Tool to Study High Energy Density Physics