Lithium solvent extraction by a novel multiframe flat membrane contactor module

Wei Li,Bingyang Bai,Rongrong He,Jianfeng Song,Tao He

DOI: https://doi.org/10.1016/j.seppur.2023.125061

IF: 8.6

2023-09-15

Separation and Purification Technology

Abstract:Comparing to conventional liquid–liquid extraction, membrane extraction is an efficient and environmentally friendly separation technique to recover lithium from the salt-lake brine. Development of suitable hydrophilic solvent resistant nanoporous membranes for membrane extraction has been based on bench-scale small module. Because module design has significant impact on the performance, this work reported a novel multiframe flat membrane contactor module (MFMC) for lithium extraction from synthetic brine. The hydrophilic poly (ethylene-co-vinyl alcohol)/sulfonated poly(ether ether ketone) membrane supported with polypropylene nonwoven (EVAL/SPEEK-NW) was prepared for module evaluation. The membrane mass transfer coefficients k m of 1.1 × 10 -6 m/s was obtained by Wilson plot. The global mass transfer coefficient K e increased from 4.5 × 10 -7 m/s to 9.9 × 10 -7 m/s following the flow velocity from 0.4 to 1.8 cm/s in membrane extraction. We further evaluated the characteristics of MFMC via height of transfer units (HTU) and module efficiency (ME). High module efficiency of 90% was obtained, demonstrating MFMC's efficient flow distribution. HTU of 28 m was estimated and was expected to decrease to 3 m by optimizing thickness of gasket and spacer as well as membrane performance. The MFMC module effectively reduced the loss of tributyl phosphate (TBP) by 91% comparing to liquid–liquid extraction. The research presented herein provides a flat membrane module design for potential future application of membrane extraction in wide applications.

engineering, chemical