Abstract:Nanofiltration (NF) with high water flux and precise separation performance with high Li+/Mg2+ selectivity is ideal for lithium brine recovery. However, conventional polyamide-based commercial NF membranes are ineffective in lithium recovery processes due to their undesired Li+/Mg2+ selectivity. In addition, they are constrained by the water permeance selectivity trade-off, which means that a highly permeable membrane often has lower selectivity. In this study, we developed a novel nonpolyamide NF membrane based on metal-coordinated structure, which exhibits simultaneously improved water permeance and Li+/Mg2+ selectivity. Specifically, the optimized Cu–m-phenylenediamine (MPD) membrane demonstrated a high water permeance of 16.2 ± 2.7 LMH/bar and a high Li+/Mg2+ selectivity of 8.0 ± 1.0, which surpassed the trade-off of permeance selectivity. Meanwhile, the existence of copper in the Cu–MPD membrane further enhanced anti-biofouling property and the metal-coordinated nanofiltration membrane possesses a pH-responsive property. Finally, a transport model based on the Nernst–Planck equations has been developed to fit the water flux and rejection of uncharged solutes to the experiments conducted. The model had a deviation below 2% for all experiments performed and suggested an average pore radius of 1.25 nm with a porosity of 21% for the Cu–MPD membrane. Overall, our study provides an exciting approach for fabricating a nonpolyamide high-performance nanofiltration membrane in the context of lithium recovery.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02252?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02252</a>.SEM images and photos of prepared membranes; ζ-potential of Cu–MPD NF membrane and PES substrate; AFM images of prepared membranes; XPS spectra and ζ-potential of prepared membranes; copper loading in the prepared membrane with different Cu/MPD ratios; UV–vis spectra and thickness of Cu–MPD oligomers with different Cu/MPD ratios; separation performance of membrane with different components; membrane anti-biofouling ability test by rotating disk; membrane anti-biofouling ability test by cross-flow filtration; copper leaching test in pure water; comparison of membrane filtration performance in this work to the literature; membrane long-term running stability test; feed, retentate, and permeate concentration in 12 h filtration; recipe for fabricating the Cu–MPD membrane; contact angle and isoelectrical point of prepared membranes; comparison of this work to the literature; Cu loading concentration in different types of membranes; average biofilm thickness and average biovolume on the surface of prepared membranes; I and Cu concentrations before and after 5 h reaction; performance of membrane with different recipes; and recipe of the membranes in Table S7 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02252/suppl_file/am1c02252_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Dual-Channel-Ion Conductor Membrane for Low-Energy Lithium Extraction

A Bioinspired Membrane with Ultrahigh Li+/Na+ and Li+/K+ Separations Enables Direct Lithium Extraction from Brine

Fine-Tuning 2D Heterogeneous Channels for Charge-Lock Enhanced Lithium Separation from Brine

Supramolecular-coordinated nanofiltration membranes with quaternary-ammonium Cyclen for efficient lithium extraction from high magnesium/lithium ratio brine

Membrane-free Electrochemical Extraction of Lithium from Geothermal Water with Transition Metal Ferrocyanide As a Counter Electrode

Lithium solvent extraction by a novel multiframe flat membrane contactor module

A Nano‐Heterogeneous Membrane for Efficient Separation of Lithium from High Magnesium/Lithium Ratio Brine

High-performance ionic liquid-based membranes employed for efficient recovery of lithium

Advanced Lithium Extraction Membranes Derived from Tagged-Modification of Polyamide Networks

Engineering Multi-field-coupled Synergistic Ion Transport System Based on the Heterogeneous Nanofluidic Membrane for High-Efficient Lithium Extraction

Designing an energy-efficient multi-stage selective electrodialysis process based on high-performance materials for lithium extraction

Lithium-Ion-Sieve-Embedded Hybrid Membranes for Anion-Exchange- and Cation-Concentration-Driven Li/Mg Separation

Nacre-like Mechanically Robust Heterojunction for Lithium-Ion Extraction

Facile Design of a Crown Ether-Functionalized Polymeric Membrane for Highly Efficient Lithium and Magnesium Separation During Electrodialysis

Extraction of lithium from Chinese salt-lake brines by membranes: Design and practice

Unlocking Direct Lithium Extraction in Harsh Conditions through Thiol-Functionalized Metal-Organic Framework Subnanofluidic Membranes

Lithium extraction from brine through a decoupled and membrane-free electrochemical cell design

Electronanofiltration Membranes with a Bilayer Charged Structure Enable High Li+/Mg2+ Selectivity

Constructing a selective blocked-nanolayer on nanofiltration membrane via surface-charge inversion for promoting Li+ permselectivity over Mg2+

Novel Positively Charged Metal-Coordinated Nanofiltration Membrane for Lithium Recovery

Lithium-ion extraction using electro-driven freestanding graphene oxide composite membranes