Abstract:Nanofiltration (NF) with high water flux and precise separation performance with high Li+/Mg2+ selectivity is ideal for lithium brine recovery. However, conventional polyamide-based commercial NF membranes are ineffective in lithium recovery processes due to their undesired Li+/Mg2+ selectivity. In addition, they are constrained by the water permeance selectivity trade-off, which means that a highly permeable membrane often has lower selectivity. In this study, we developed a novel nonpolyamide NF membrane based on metal-coordinated structure, which exhibits simultaneously improved water permeance and Li+/Mg2+ selectivity. Specifically, the optimized Cu–m-phenylenediamine (MPD) membrane demonstrated a high water permeance of 16.2 ± 2.7 LMH/bar and a high Li+/Mg2+ selectivity of 8.0 ± 1.0, which surpassed the trade-off of permeance selectivity. Meanwhile, the existence of copper in the Cu–MPD membrane further enhanced anti-biofouling property and the metal-coordinated nanofiltration membrane possesses a pH-responsive property. Finally, a transport model based on the Nernst–Planck equations has been developed to fit the water flux and rejection of uncharged solutes to the experiments conducted. The model had a deviation below 2% for all experiments performed and suggested an average pore radius of 1.25 nm with a porosity of 21% for the Cu–MPD membrane. Overall, our study provides an exciting approach for fabricating a nonpolyamide high-performance nanofiltration membrane in the context of lithium recovery.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c02252?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c02252</a>.SEM images and photos of prepared membranes; ζ-potential of Cu–MPD NF membrane and PES substrate; AFM images of prepared membranes; XPS spectra and ζ-potential of prepared membranes; copper loading in the prepared membrane with different Cu/MPD ratios; UV–vis spectra and thickness of Cu–MPD oligomers with different Cu/MPD ratios; separation performance of membrane with different components; membrane anti-biofouling ability test by rotating disk; membrane anti-biofouling ability test by cross-flow filtration; copper leaching test in pure water; comparison of membrane filtration performance in this work to the literature; membrane long-term running stability test; feed, retentate, and permeate concentration in 12 h filtration; recipe for fabricating the Cu–MPD membrane; contact angle and isoelectrical point of prepared membranes; comparison of this work to the literature; Cu loading concentration in different types of membranes; average biofilm thickness and average biovolume on the surface of prepared membranes; I and Cu concentrations before and after 5 h reaction; performance of membrane with different recipes; and recipe of the membranes in Table S7 (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c02252/suppl_file/am1c02252_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-performance ionic liquid-based membranes employed for efficient recovery of lithium

A Bioinspired Membrane with Ultrahigh Li+/Na+ and Li+/K+ Separations Enables Direct Lithium Extraction from Brine

Nanofiltration membrane with crown ether as exclusive Li+ transport channels achieving efficient extraction of lithium from salt lake brine

Supported ionic liquid membrane contactor with crown ether functionalized polyimide membrane for high-efficient Li + /Mg 2+ selective separation

Efficient Lithium Recovery from Water Using Polyamide Thin-Film Nanocomposite (TFN) Membrane Modified with Positively Charged Silica Nanoparticles

Advanced Lithium Extraction Membranes Derived from Tagged-Modification of Polyamide Networks

Unprecedented Mg2+/Li+ separation using layer-by-layer based nanofiltration hollow fiber membranes

Quaternary phosphonium-polyamide membranes for efficient lithium extraction from brine sources

Highly selective Mg2+/Li+ separation membranes prepared by surface grafting of a novel quaternary ammonium bromide

Novel Positively Charged Metal-Coordinated Nanofiltration Membrane for Lithium Recovery

A novel nanofiltration membrane with [MimAP][Tf2N] ionic liquid for utilization of lithium from brines with high Mg2+/Li+ ratio

Extraction and separation of Li+ from high-ratio Mg/Li salt lake brines by [C2mim][NTf2] ionic liquid and a homemade extractor

Positively‐Coated Nanofiltration Membranes for Lithium Recovery from Battery Leachates and Salt‐Lakes: Ion Transport Fundamentals and Module Performance

A Nano‐Heterogeneous Membrane for Efficient Separation of Lithium from High Magnesium/Lithium Ratio Brine

Ultrasound assisted efficient separation of lithium from brine with a composite polyether sulfone-ionic liquid membrane

Tailorable metal–organic framework based thin film nanocomposite membrane for lithium recovery from wasted batteries

Dual-Channel-Ion Conductor Membrane for Low-Energy Lithium Extraction

Ion-"distillation" for isolating lithium from lake brine

Selective recovery of lithium ion from its mixed solution with potassium and sodium by electrobaromembrane method

Fine-Tuning 2D Heterogeneous Channels for Charge-Lock Enhanced Lithium Separation from Brine

Li1.5Al0.5Ge1.5(PO4)3 membrane electrodialysis for lithium enrichment