Abstract:The separation of Li+ from Mg2+ in salt-lake brines using nanofiltration (NF) has become the most popular solution to meet the rising demand for lithium, particularly driven by the extensive use of lithium-ion batteries. This study presents the fabrication of a uniquely designed polyamide (PA) thin-film nanocomposite (TFN) membranes with ultrahigh Li+/Mg2+ selectivity and enhanced water flux by covalently incorporating mixed ligands functionalized silica nanoparticles (F-SiO2NPs) into the selective PA layer and covalently bonding them to the membrane surface. In this strategy, bare silica nanoparticles (SiO2NPs) were functionalized with mixed superhydrophilic ligands, including primary amine and quaternary ammonium groups, resulting in a highly positive surface charge primarily from the quaternary ammonium groups and enabling covalent conjugation via amine groups. Among the F-SiO2NP-incorporated membranes, M500 containing 500 ppm of F-SiO2NPs exhibited the best performance. In a solution with 2000 ppm salt concentration (Li+/Mg2+ ratio of 1:20), the M500 membrane showed an improved Li+/Mg2+ selectivity of 7.41 compared to the nonmodified TFC membrane, which had a selectivity of 5.05. Further surface conjugation of the M500 sample with 1500 ppm of F-SiO2NPs resulted in the C1500 membrane, demonstrating the best performance among all of the surface-modified membranes. C1500 showed an outstanding Li+/Mg2+ selectivity of 37.95, with a Mg2+ rejection of 95.7% and a Li+ rejection of -63.2%, and a water flux of 56.0 L m-2 h-1 at 70 psi. Notably, a 7.5-fold improvement in Li+/Mg2+ selectivity over the TFC membrane was achieved without compromising the water flux. This is evident from the nearly identical water flux values of the TFC, M500, and C1500 membranes, which were 57.1, 54.8, and 56.0 L m-2 h-1, respectively. Considering key factors for large-scale applications, such as cost-effectiveness, environmental impact, the abundance of synthetic precursors, and the maturity of synthesis and tailoring technologies, SiO2NP-based modifications outperform all other reported approaches to date.

Supported ionic liquid membrane contactor with crown ether functionalized polyimide membrane for high-efficient Li + /Mg 2+ selective separation

A remarkable improved Li + /Mg 2+ selectivity and Li + recovery simultaneously by adding crown ether to tributyl phosphate-ionic liquid extraction system as co-extractant

Extraction and separation of Li+ from high-ratio Mg/Li salt lake brines by [C2mim][NTf2] ionic liquid and a homemade extractor

Lithium extraction from synthetic brine with high Mg2+/Li+ ratio using the polymer inclusion membrane

Aza-crown ether-coupled polyamide nanofiltration membrane for efficient Li+/Mg2+ separation

Bifunctional polyhedral oligomeric silsesquioxane engineered polyamide membrane for efficient Li + /Mg 2+ separation

Polyamide nanofiltration membranes with rigid–flexible microstructures for high-efficiency Mg 2+ /Li + separation

Nanofiltration membrane with crown ether as exclusive Li+ transport channels achieving efficient extraction of lithium from salt lake brine

Enhancing Mg 2+ /Li + separation performance of nanofiltration membranes through polyelectrolyte modulation and surface modification

Facile Design of a Crown Ether-Functionalized Polymeric Membrane for Highly Efficient Lithium and Magnesium Separation During Electrodialysis

Crown ether-based Tröger's base membranes for efficient Li+/Mg2+ separation

Efficient Lithium Recovery from Water Using Polyamide Thin-Film Nanocomposite (TFN) Membrane Modified with Positively Charged Silica Nanoparticles

Lithium-Ion-Sieve-Embedded Hybrid Membranes for Anion-Exchange- and Cation-Concentration-Driven Li/Mg Separation

Temperature-responsive liquid-liquid extraction of Li + from high Mg/Li ratio brine

Nanofiltration membrane with modified nano-gradient structure and positive charge for Li separation from high Mg/Li ratio brine

Remarkably High Li + Adsorptive Separation Polyamide Membrane by Improving the Crown Ether Concentration and Electron Density

Space‐Confined Synthesis of Thinner Ether‐Functionalized Nanofiltration Membranes with Coffee Ring Structure for Li+/Mg2+ Separation

Fabrication of positively charged nanofiltration membrane with uniform charge distribution by reversed interfacial polymerization for Mg2+/Li+ separation

Covalent Organic Framework Membranes Achieving Mg/Li Separation by Permeating Mg2+ While Retaining Li+

Improving Mg 2+ /Li + separation performance of polyamide nanofiltration membrane by swelling-embedding-shrinking strategy

Electronanofiltration Membranes with a Bilayer Charged Structure Enable High Li+/Mg2+ Selectivity