Strength analysis of the interference joint of the oval submarine pipeline to the mechanical connector

Yuguang Cao,Lei Zhang,Yongtai Sun,Yongjin Shi,Yaya He,Ying Zhen

DOI: https://doi.org/10.1016/j.apor.2020.102229

IF: 3.761

2020-08-01

Applied Ocean Research

Abstract:<p>For damaged submarine pipelines, interference fit is necessary for the mechanical connector repair. The ovality of pipelines resulting from the fabrication errors is easy to increase the failure risk during the fit process. In order to ensure the construction safety, it is necessary to judge whether the repair process may be affected by the strength damage in advance. Since the interference joint with ovality is a complex nonlinear contact problem, there is no theoretical model for reference at present. Reasonable and verified numerical simulation has been proved to be a convenient and feasible solution. In this paper, the finite element (FE) software ANSYS was used to analyze the contact characteristics of the pipeline coupled with the theory of combined thick-wall cylinder. The influences of the equivalent interference and pipeline ovality on the maximum effective stress of the pipeline were quantitatively characterized, and the corresponding correlation model was fitted. The results show that the contact stress of pipeline is closely related to the equivalent interference, the ovality hardly effects it but has a significant effect on the uniformity of the contact stress distribution on the interference surface. Furthermore, according to the theoretical solution, the prediction model of the equivalent stress of pipeline is deduced with an introduced ovality stress concentration coefficient. The prediction model can effectively evaluate the strength of the submarine pipeline after interference repair. The rationality and practicability of this method are validated by simulation analysis of a practical engineering project.</p>

engineering, ocean,oceanography