Abstract:<p>For damaged submarine pipelines, interference fit is necessary for the mechanical connector repair. The ovality of pipelines resulting from the fabrication errors is easy to increase the failure risk during the fit process. In order to ensure the construction safety, it is necessary to judge whether the repair process may be affected by the strength damage in advance. Since the interference joint with ovality is a complex nonlinear contact problem, there is no theoretical model for reference at present. Reasonable and verified numerical simulation has been proved to be a convenient and feasible solution. In this paper, the finite element (FE) software ANSYS was used to analyze the contact characteristics of the pipeline coupled with the theory of combined thick-wall cylinder. The influences of the equivalent interference and pipeline ovality on the maximum effective stress of the pipeline were quantitatively characterized, and the corresponding correlation model was fitted. The results show that the contact stress of pipeline is closely related to the equivalent interference, the ovality hardly effects it but has a significant effect on the uniformity of the contact stress distribution on the interference surface. Furthermore, according to the theoretical solution, the prediction model of the equivalent stress of pipeline is deduced with an introduced ovality stress concentration coefficient. The prediction model can effectively evaluate the strength of the submarine pipeline after interference repair. The rationality and practicability of this method are validated by simulation analysis of a practical engineering project.</p>

Structural strength analysis of curved submarine pipes during pipeline connection

Lifting of Horizontal Subsea Pipeline with Diverse Lifting Points in Waves: Hydrodynamic Analysis

Fatigue Failure Analysis and Simulation Calculation of Submarine Suspended Pipelines

Modelling lateral pipe-soil interaction on soft clay using large displacement sequential limit analysis

Analysis on Buckling Performance of Submarine Pipelines During Deepwater Pipe-Laying Operation

Analysis on Ultimate Bearing Capacity of Deepwater Submarine Pipe

Parametric study on the mechanical behavior of submarine pipeline for deepwater S-lay operation

Configuration of Submarine Pipeline for Deepwater S-lay Technique

Configuration Analysis of Deepwater S-Lay Pipeline

Mechanical study on overbend segment of submarine pipeline during S-Lay

Buckling Response of Offshore Pipelines under Combined Tension and Bending

Mechanical Analysis of Submarine Pipeline During Off-Bottom Towing Operation

Strength analysis of the interference joint of the oval submarine pipeline to the mechanical connector

Numerical Analysis for Pipeline Installation by S-Lay Method

Buckling Response of Offshore Pipelines under Combined Tension, Bending, and External Pressure

Analytical Solution of Pipeline Upheaval Buckling Considering Bi-Linear Axial Pipe-Soil Interaction Model

An Analytical Method for Mechanical Analysis of Offshore Pipelines during Lifting Operation

Mechanical Analysis of Flexible Pipe During Installation

Fatigue Reliability Analysis of Submarine Pipeline with Free Span Considering Geometrical Nonlinearity

Numerical model for pipeline laying during S-lay

Asymmetric buckling of offshore pipelines under combined tension, bending and external pressure