Inverse design of mid-infrared diamond waveguide beam splitter

Yihao Li,Shu Chen,Yanan Yu,Chen Li,Tinghui Xiao

DOI: https://doi.org/10.1364/ol.526023

IF: 3.6

2024-06-19

Optics Letters

Abstract:Yihao Li, Shu Chen, Yanan Yu, Chen Li, Ting-hui Xiao Diamond is a supreme material for mid-infrared (MIR) integrated photonics as it has a transparency window up to 20?μm that covers the ... [Opt. Lett. 49, 3620-3623 (2024)]

optics

What problem does this paper attempt to address?

Design and Fabrication of Short-Wave /Long-Wave Infrared Dichroic Beam Splitter

Zhang Yueguang,Wang Ying,Sun Xuezheng,Shen Weidong,Liu Xu,Gu Peifu

DOI: https://doi.org/10.3788/aos20103002.0597

2010-01-01

Acta Optica Sinica

Abstract:Short-wave/long-wave infrared dichroic beam splitters take an important role in two-band infrared imaging optical systems. The choice of substrate and coating materials are discussed. Ge, ZnSe and YbF_3 were chosen as film materials and ZnSe as substrate; The coating reflecting the shortwave infrared light while transmiting the longwave infrared (8 ～ 12 μm ) light is analyzed, and the beam splitter is manufactured by electronic-beam evaporation. The measured reflectivity and transmittance of corresponding band are all above 93%. Such dichroic beam splitters have been successfully applied to the actual optical system.
DESIGN AND FABRICATION OF VISIBLE+1.54μm LASER/LONGWAVE INFRARED DICHROIC BEAMSPLITTER

Yue-Guang ZHANG,Ying WANG,Xue-Zheng SUN,Wei-Dong SHEN,Xu LIU,Pei-Fu GU

DOI: https://doi.org/10.3724/SP.J.1010.2009.00307

2009-01-01

JOURNAL OF INFRARED AND MILLIMETER WAVES

Abstract:Visible + 1.54 mu m laser/long-wave infrared dichroic beamsplitters, which separate the incident spectrum into visible light, laser and longwave infrared light, take an important role in multichannel imaging spectrum technique. The choice of substrates and coating materials was discussed. Then the coating design of reflecting the visible(400 similar to 800nm) and laser (1540nm) light while transmitting the longwave infrared( 8 similar to 12 mu m) spectrum was analysed, and the beamsplitter was manufactured by e-gun evaporation. The measured reflectivity and transmittance of the corresponding channel are all above 94% and the dichroic beanisplitters has been used in practical optical system successfully.
Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Menghan Yu,Siwen Ai,Yuanliu Chen,Feng Chen,Hongliang Liu

DOI: https://doi.org/10.3788/col202422.090008

IF: 2.56

2024-01-01

Chinese Optics Letters

Abstract:In this Letter, waveguide beam splitters (1 x 3) with type I modifications are fabricated in a LiNbO3 crystal by femtosecond laser direct writing. The influence of the relative positions of three sub-waveguides on power splitting ratios are investigated in detail and the corresponding output intensities as functions of the relative positions in the numerical simulation are plotted, which are in good accordance with the experimental results. In addition, the waveguide beam splitter with a 1:1:1 splitting ratio is fabricated by changing the relative widths of the three branch-waveguides. Guiding performances at 532 nm are measured and analyzed by a typical end-face coupling system. The simulation and experimental results demonstrate that the beam splitting ratio of the waveguide splitter can be precisely regulated by the positions and widths of the sub-waveguides.
Design and Optimization of Diamond Mid-Infrared Phase Shifter

Chengke Chen,Zhi He,Ancha Xu,Xiao Li,Meiyan Jiang,Tao Xu,Bo Yan,Xiaojun Hu

DOI: https://doi.org/10.1080/26941112.2020.1869485

2021-01-01

Functional Diamond

Abstract:Herein, the mid-infrared (7.7–13.7 μm) diamond-based phase shifter was designed and optimized by finite-element analysis. The ridge-shaped diamond waveguide is designed and doped to form the internal p–n structure, and the internal carrier distribution is changed by applying forward and reverse voltages to change the effective refractive index to achieve the effect of π-phase shift. The results show that when p-doping concentration is 4 × 1017 cm−3 and n doping concentration is 1 × 1018 cm−3, upon the reverse voltage (8 V) is applied, the change of the real part of effective refractive index (ΔR) is 1.6 × 10−5, and the length of the phase shifter (L) required to realize the π-phase shift is 241 mm; upon the forward voltage (–8 V) is applied, ΔR increases to 3.2 × 10−4, and the length of the phase shifter required is shortened to 12.03 mm. Such a short length is relatively easy in industrial production. In order to make the refractive index distribution more uniform, the carrier concentration has been optimized as 1 × 1017 cm−3 for p-type and 4 × 1017 cm−3 for n-type, respectively.
Design of Broadband and Wide-angle Non-polarization Beamsplitter

李明宇,顾培夫

DOI: https://doi.org/10.3969/j.issn.1001-5078.2002.05.003

2002-01-01

Abstract:The design of a visible broadband and wide-angle metal-dielectric non-polarization Beamsplitter deposited on substrate of K9 glass is briefly presented. The spectral wavelength region of the design is from 420 to 680nm, and the incident angle of ±8°in air. The average deviation of transmittance and reflectance is about 2.5%. The average deviation of p-polarization and s-polarization is about 1%.
Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Zhihua Tu,Qiang Jin,Xibin Li,Shiming Gao

DOI: https://doi.org/10.1364/josab.35.001772

2018-01-01

Abstract:Mid-infrared (MIR) integrated waveguides with strong local field enhancement and relatively low loss have shown their potential in nonlinear optical applications. We present a novel highly nonlinear silicon hybrid waveguide by setting an insulator-metal-insulator structure with [2-[4-(dimethylamino)phenyl]-3-([4-(dimethylamino)phenyl]ethynyl)buta-1,3-diene-1,1,4,4-tetracarbonitrile] (DDMEBT) and silver materials into the silicon slot. The mode field is strongly confined in the DDMEBT layers via the surface plasmon polariton effect. Two rectangular silicon nanobridges are used to further confine the optical field and reduce the loss simultaneously. The waveguide dimensions are optimized to obtain a figure of merit as high as 0.55 at 2.1 mu m and a zero-dispersion wavelength of 2.06 mu m. In a 6.6-mm-long waveguide, a maximum four-wave mixing efficiency of -6.65 dB and a bandwidth of 512 nm (1.894-2.406 mu m) can be simultaneously obtained, pumped by a 2.104-mu m source with a power of only 500 mW. Our designed waveguide exhibits excellent overall performance for nonlinear optical applications such as all-optical signal processing in the MIR band. (C) 2018 Optical Society of America
Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Yuan Wenjia,Shen Weidong,Zhang Yueguang,Zheng Xiaowen,Mu Wen,Fang Bo,Yang Chenying,Liu Xu

DOI: https://doi.org/10.3788/AOS201737.0531001

2017-01-01

Acta Optica Sinica

Abstract:A differential phase shift beam splitter with a multi-layer dielectric film structure which is used for a division-of-amplitude photopolarimeter (DOAP) with an operating wavelength of 1064 nm is designed and prepared.The optimal parameters of beam splitter are obtained by analyzing instrument matrix parameters of the DOAP system.The beam splitter sample and its anti-reflection coating on the backside are prepared with the ion beam sputtering (IBS) deposition method.The experimental results are well consistent with the designed value.Comparing with single-layer film beam splitters,this multilayer dielectric film beam splitters possess a wider application,which is not limited by the substrate,layer materials,incident angle,and operating wavelength.
Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

J Bai,XY Hou,YB Shen,YY Liang,GG Yang

DOI: https://doi.org/10.1117/12.471184

2002-01-01

Abstract:An infrared hybrid refractive/diffractive optical system for 3-5mum band, which is composed of four refractive elements and one binary optical element(BOE), has been designed and manufactured. The BOE, whose chromatic behavior is opposite to that of the refractive element, has made it possible for us to design the diffraction-limited optical system with field of 4(0) x 4(0), aperture of 60mm, F-number of 2.46, total track of 140mm and temperature range from -30degreesC similar to 70degreesC. A polar coordinate laser direct writing system (PLDWS) and a reactive ion beam etching (RIBE) device have been established to manufacture the BOE. The imaging performance of our optical system has been tested by Ealing IR MTF equipment, which shows that the diameter of spot is less than 80mum when the energy within the spot is 90% of the total.
Design of Mid-Infrared Nonlinear Silicon–germanium Waveguides for Broadband/discrete-Band Wavelength Conversion

Dongsheng Lyu,Qiang Jin,Shiming Gao

DOI: https://doi.org/10.1364/josab.35.000741

2018-01-01

Journal of the Optical Society of America B

Abstract:A dispersion-engineered silicon-germanium (Si0.8Ge0.2) waveguide is designed for mid-infrared (MIR) broadband or discrete-band wavelength conversion by using its advantages of high nonlinearity and tight mode-field confinement. The dispersion of this waveguide is engineered by optimizing the waveguide geometry. The zero-dispersion wavelength is tuned to about 2 mu m, and the dispersion curve is flattened to reduce the dispersion slope. In the MIR band, the 3 dB bandwidth for the four-wave mixing effect reaches 795 nm, and the peak conversion efficiency is -25.0 dB when the pump power is 500 mW, which can support the broadband all-optical wavelength conversion for next-generation MIR optical communications. Discrete-band wavelength conversion between the MIR (2.5-3.8 mu m) and telecommunication (1.30-1.72 mu m) bands is realized by using the pair of phase-matching wavelengths far away from the pump. Moreover, by choosing proper waveguide geometries, the signals in the band of 2.0-3.8 mu m can be efficiently converted to the idler with fixed wavelength of 1.55 mu m, which exhibits the potential to realize indirect detection by using telecommunication-band detectors to detect MIR signals. (C) 2018 Optical Society of America
Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Bowei Dong,Xin Guo,Chong Pei Ho,Bo Li,Hong Wang,Chengkuo Lee,Xianshu Luo,Guo-Qiang Lo

DOI: https://doi.org/10.1109/jphot.2017.2692039

IF: 2.4

2017-01-01

IEEE Photonics Journal

Abstract:In this paper, we demonstrate silicon-on-insulator (SOI) channel waveguides with propagation loss and $r$ = 10 $\mu$$\text{m}$ bends with bending loss as low as 2 dB/cm and 0.02 dB/90 $^{\circ }$ in the broad wavelength range of 3.68–3.88 $\mu$ $\text{m}$. We also indicate the limitation of SOI waveguide loss in mid-infrared wavelength by analyzing loss mechanisms. Based on this high-performance mid-infrared waveguide, we systematically analyze the coupling efficiency of various directional couplers, which are critical and commonly used building blocks for on-chip light routing and power splitting. By varying coupling length and sweeping wavelength, the performance of directional coupler with various gap separations is meticulously investigated in 3.68–3.88 $\mu$ $\text{m}$. A experimental database for directional coupler with any power splitting ratio is provided. Our results offer a promising broadband platform for dense wavelength division multiplexing (DWDM) and applications that require precise control of coupling such as racetrack resonator in the mid-infrared region.
Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

Yuxin Wei,Guoyi Li,Yinlei Hao,Yubo Li,Jianyi Yang,Minghua Wang,Xiaoqing Jiang

DOI: https://doi.org/10.1364/OE.19.015803

IF: 3.8

2011-01-01

Optics Express

Abstract:The undercut long-wave infrared (LWIR) waveguide components with air-gap beneath are analyzed and fabricated on the Si-wafer with simple manufacturing process. A 1 x 2 multimode interference (MMI) splitter based on this structure is presented and measured under the 10.6 mu m wavelength experimental setup. The uniformity of the MMI fabricated is 0.76 dB. The relationship among the output power, slab thickness and air-gap width is also fully discussed. Furthermore, undercut straight waveguides based on SOI platform are fabricated for propagation loss evaluation. Ways to reduce the loss are discussed either. (C) 2011 Optical Society of America
Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Bohao Zhang,Weiwei Chen,Pengjun Wang,Shixun Dai,Hongxiang Li,Hao Lu,Jian Ding,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Yuehai Wang,Jianyi Yang

DOI: https://doi.org/10.1016/j.optcom.2019.06.057

IF: 2.4

2019-01-01

Optics Communications

Abstract:A polarization beam splitter based on metasurface-assisted silicon nitride Y-junction for mid-infrared wavelengths is proposed and numerically investigated. By properly selecting the structural parameters using the finite difference time domain method and particle swarm optimization algorithm, the input fundamental transverse-magnetic (TM0) and transverse-electric (TE0) modes can be converted and separated from each other with high efficiency. Simulation results exhibit that the conversion efficiencies for TM0-to-TE1 polarization and TE0-to-TM0 polarization are respectively 97.4% and 97.6%. At the mid-infrared wavelength of 2. 5μm, the polarization extinction ratios of the designed PBS with the input TM0 and TE0 modes are 27.45 and 27.61 dB. The corresponding insertion losses are 0.21 and 0.31 dB. Within a bandwidth from 2. 45μm to 2.55μm, the polarization extinction ratio is greater than 19.48 dB and the insertion loss is less than 1.41 dB.
Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

Tian Bao Yu,Qi Jie Wang,Jun Zhang,Jian Yi Yang,Siu Fung Yu

DOI: https://doi.org/10.1109/lpt.2011.2154360

IF: 2.6

2011-01-01

IEEE Photonics Technology Letters

Abstract:The properties of two-fold images, based on asymmetric interference in multimode interference-based photonic crystal waveguides, are numerically studied with finite-difference time-domain simulations. With these image properties, 2 x 2 power splitters (PSs) with an ultracompact size are designed. Arbitrary splitting ratio can be achieved by modifying the sizes (the effective refractive indices) of one pair of rods in the multimode region. As an example, a 3-dB 2 x 2 PS with a size of 24 x 8 mu m(2) is presented with an output efficiency as high as 98%. The method can be extended for the design of M x N PSs for photonic integrated circuits applications.
A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

Kun Li,Fan Lu,Dalin Liu,Zhijun He

DOI: https://doi.org/10.1364/cleo_at.2014.jw2a.47

2014-01-01

Abstract:A novel polarization and dichroic dual-functional splitter is proposed, with ultra-high polarization splitting ratios >33dB and >36dB for TE- and TM-polarized modes, respectively; and with high wavelength splitting ratios >26dB and >33dB for 650nm and 850nm, respectively.
Ultracompact multiway beam splitters using multiple coupled photonic crystal waveguides

Tianbao Yu,Haifeng Zhou,Zhao Gong,Jianyi Yang,Xiaoqing Jiang,Minghua Wang

DOI: https://doi.org/10.1088/0022-3727/41/9/095101

2008-01-01

Abstract:Ultracompact 1 x N ( N > 2) beam splitters based on coupling of multiple photonic crystal waveguides (PCWs) are numerically demonstrated. The operation of the devices is on the basis of the self-imaging phenomenon. Variation of the effective index of modified rods induces the transverse redistribution of the N-fold images with the same coupling length, and uniform or free splitting can be achieved. The devices with three and four output channels are discussed in details as examples. Results show that this kind of beam splitters are very short. At the operating wavelength of 1.55 mu m, the splitting length of the devices is only 35 mu m even if the output channel number reaches 20. It provides a new method and a compact model to export freely the beam to N channels in PCW devices and can find practical applications in future photonic integrated circuits.
Ultrafast-laser-inscribed multiscan type-I mid-infrared waveguides and beamsplitters in IG2

Wendwesen Gebremichael,Derek Oliwa,John Fernandes,Christophe Dorrer,Jie Qiao

DOI: https://doi.org/10.1364/oe.515347

IF: 3.8

2024-02-22

Optics Express

Abstract:Wendwesen Gebremichael, Derek Oliwa, John Fernandes, Christophe Dorrer, Jie Qiao This study reports the fabrication and characterization of various configurations of mid-infrared waveguides and beamsplitters within the ... [Opt. Express 32, 8042-8058 (2024)]

optics
Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Jia Xu Brian Sia,Wanjun Wang,Xin Guo,Jin Zhou,Zecen Zhang,Mohamed Said Rouifed,Xiang Li,Zhong Liang Qiao,Chong Yang Liu,Callum Littlejohns,Graham T. Reed,Hong Wang

DOI: https://doi.org/10.1109/jphot.2019.2907788

IF: 2.4

2019-01-01

IEEE Photonics Journal

Abstract:We designed and demonstrated TE-mode arbitrary power splitters based on adiabatic mode evolution. The power splitters are designed with a footprint of smaller than 12 × 2.9 μm2, fabricated on a 400-nm silicon-on-insulator platform, requiring only a single etch step. The optimization process and the conditions for arbitrary-power splitting are performed using three-dimensional-FDTD simulations. We prove this concept through the fabrication of asymmetrical adiabatic evolution-based power splitters with splitting ratios of 50:50, 60:40, and 70:30. The fabricated devices are shown to agree closely with simulation results. Broadband operation with low insertion loss of 0.11–0.6 dB is demonstrated across the 3.66–3.89 μm wavelength range (230 nm). This component has applications in a multitude of areas such as spectroscopic optical sensing and optical phased arrays photonic integrated circuits etc.
Design of a switchable triple-waveguide-based TE-converted polarization beam splitter based on lithium niobate

Jun Xia,Yedeng Fei,Yi Ni

DOI: https://doi.org/10.1364/ao.536650

IF: 1.9

2024-10-09

Applied Optics

Abstract:Jun Xia, Yedeng Fei, Yi Ni The lithium-niobate-on-insulator (LNOI) platform has been the new force to drive the developments of integrated photonics, where efficient ... [Appl. Opt. 63, 7741-7746 (2024)]

optics
A simple reflective metalens based on reverse design for ultra high efficiency free space wavelength splitter

Chao Wang,Yunpeng Hao,Boqi Wu,Fan Yang,Chunlei Zhao,Yaodan Chi,Xiaotian Yang

DOI: https://doi.org/10.35848/1882-0786/ad2c00

IF: 2.819

2024-02-23

Applied Physics Express

Abstract:We propose two kinds of high efficiency free space wave splitters in the mid-infrared band using reverse design. The divider based on the abnormal reflection principle realizes the beam splitting angle of 22.00◦ and 10.92◦ by controlling the phase distribution, and the reflection efficiency of both wavelengths exceeds 50%. The wavelength divider designed based on the concept of metalens can realize the functions of focusing and beam splitting simultaneously. Its focal length and relative focal position are 100μm and 100μm, respectively. The most important is that the focusing efficiency of the two wavelengths is as high as 48.59% and 72.51%.

physics, applied
Optical transformation design of waveguide bends and splitter in photonic crystals

shenyun wang,xianyang liu,y zhu

DOI: https://doi.org/10.1016/j.optcom.2015.06.031

IF: 2.4

2015-01-01

Optics Communications

Abstract:In this paper, an alternative approach for waveguide branch design in photonic crystals is presented. Two kinds of waveguide branches, including L-shaped waveguide bender and T-shaped splitter, are theoretically designed by using the method of transformation optics. Based on the parameters designed, electromagnetic simulations by finite-element method on detailed examples have been performed to validate the desirable properties of low reflection and minimized distortion at the branching region and to exhibit broadband for TE wave.

Inverse design of mid-infrared diamond waveguide beam splitter

Design and Fabrication of Short-Wave /Long-Wave Infrared Dichroic Beam Splitter

DESIGN AND FABRICATION OF VISIBLE+1.54μm LASER/LONGWAVE INFRARED DICHROIC BEAMSPLITTER

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Design and Optimization of Diamond Mid-Infrared Phase Shifter

Design of Broadband and Wide-angle Non-polarization Beamsplitter

Mid-infrared Nonlinear Silicon Hybrid Waveguide with High Figure of Merit

Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Design of Mid-Infrared Nonlinear Silicon–germanium Waveguides for Broadband/discrete-Band Wavelength Conversion

Silicon-on-Insulator Waveguide Devices for Broadband Mid-Infrared Photonics

Long-wave infrared 1 × 2 MMI based on air-gap beneath silicon rib waveguides.

Particle Swarm Optimized Polarization Beam Splitter Using Metasurface-Assisted Silicon Nitride Y-junction for Mid-Infrared Wavelengths

Ultracompact 2 $\,\times\,$ 2 Photonic Crystal Waveguide Power Splitter Based on Self-Imaging Effect Realized by Asymmetric Interference

A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

Ultracompact multiway beam splitters using multiple coupled photonic crystal waveguides

Ultrafast-laser-inscribed multiscan type-I mid-infrared waveguides and beamsplitters in IG2

Mid-Infrared, Ultra-Broadband, Low-Loss, Compact Arbitrary Power Splitter Based on Adiabatic Mode Evolution

Design of a switchable triple-waveguide-based TE-converted polarization beam splitter based on lithium niobate

A simple reflective metalens based on reverse design for ultra high efficiency free space wavelength splitter

Optical transformation design of waveguide bends and splitter in photonic crystals