Abstract:In the 3-5 & mu;m mid-wave infrared (MWIR) atmospheric transparency window region, infrared detectors are widely applied in spectral imaging, remote sensing and other fields, and their rapid development has put forward higher requirements for infrared optical windows. Common mid-wave infrared optical materials such as germanium and zinc sulfide have poor mechanical properties, causing them difficult to meet various harsh environments. In this paper, a 3-layer film stack is proposed to achieve high transmission and high hardness by radio-frequency reactive magnetron sputtering with the single aluminum target. Two types of AlN/ Al2O3/AlN stack with top AlN thicknesses of 50 and 100 nm are studied to realize the best optical and mechanical characteristics. The average transmission increases up to 94.0% for 3-5 & mu;m with the double-side AlN/Al2O3/AlN stacks on the silicon substrate, while the hardness is significantly improved to-16.6 GPa for both types. After annealing at 500 degrees C and 750 degrees C for 6 h in a vacuum environment, the spectra of the two film stacks move towards the shorter wavelength slightly, and the hardness of both are obviously enhanced. The highest hardness of the film system reaches-20.8 GPa, making it far more resistant to sand erosion than ordinary antireflection films. The result shows that this film stack can withstand high temperature and gravel impact tests, meeting the service requirements of the harsh environment of the MWIR optical system.

Design and Fabrication of Short-Wave /Long-Wave Infrared Dichroic Beam Splitter

DESIGN AND FABRICATION OF VISIBLE+1.54μm LASER/LONGWAVE INFRARED DICHROIC BEAMSPLITTER

Design and Fabrication of Infrared Hybrid Refractive/diffractive Optical System for 3-5Μm Band

Polarization, Part-Polarization and Non-Polarization Beam Splitters on Substrate of BK7

Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Design of Broadband and Wide-angle Non-polarization Beamsplitter

Compact 1 X 3 Waveguide Beam Splitters with Variable Splitting Ratios in LiNbO3 Crystal Fabricated by Femtosecond Laser Direct Writing

Rib and strip chalcogenide waveguides based on Ge-Sb-Se radio-frequency sputtered films

Athermal design of long-wave infrared optical system with hybrid refractive/diffractive

A Binary Beam-Splitter For Lidar Beam-Shaping In Laser Imaging Application - Art. No. 66241j

Design of Infrared Hybrid Athermal Optical System

Design of Wide-Angle and Broad-Band Two-Dimensional Photonic Crystal Polarization Splitter by the Automatic Shaping Mechanism

Scratch-resistant Antireflective Coating for Mid-Wave Infrared Band

Research on the Wide-Angle and Broadband 2d Photonic Crystal Polarization Splitter

Design of 2D Photonic Crystal Polarization Splitters

High-reliability infrared broadband thin-film polarizing beam splitter with ZnSe compensation layers

Analysis of Polarization-independent Optical Directional Coupler Based on Slot Waveguides for Long-wave Infrared

Broadband, Optically Transparent And Highly Flexible Multispectral Beam Splitter Based On Ag Nanowires/Graphene Composite Film For Hybrid Optical Systems

Inverse design of mid-infrared diamond waveguide beam splitter

Optical System Design for a Shortwave Infrared Imaging Spectrometer

A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios