Polarization, Part-Polarization and Non-Polarization Beam Splitters on Substrate of BK7

Gu Peifu,Liu Xu,Tang Jinfa,Zheng Zhidong

DOI: https://doi.org/10.1364/oic.1995.mb11

1995-01-01

Abstract:Polarization, part-polarization and non-polarization beam splitters are widely used for various purpose.

What problem does this paper attempt to address?

Polarization Selective Beamsplitter

Gu Peifu,Liu Xu,Li Haifeng,Zheng Zhidong,Liu Lanfen,Tang Jinfa

DOI: https://doi.org/10.1364/oic.1995.thc8

1995-01-01

Abstract:The function of the polarization selective beam splitters used for full color display involves two aspects: polarizing light radiation and separating light beam into three primary colors. The properties of these beamspliters have great influence on the brightness, contrast and color distortion of the display system.
Design of particular polarization beam splitter

Haiyan Xie,Xu Liu,Peifu Gu,Jinfa Tang

1995-01-01

Abstract:The polarization beam splitter system for the full colour large display using liquid crystal was designed. The merit function was set up so as to demonstrate the colour restoration of projection image from the view of colourmetry.
Design of Broadband and Wide-angle Non-polarization Beamsplitter

李明宇,顾培夫

DOI: https://doi.org/10.3969/j.issn.1001-5078.2002.05.003

2002-01-01

Abstract:The design of a visible broadband and wide-angle metal-dielectric non-polarization Beamsplitter deposited on substrate of K9 glass is briefly presented. The spectral wavelength region of the design is from 420 to 680nm, and the incident angle of ±8°in air. The average deviation of transmittance and reflectance is about 2.5%. The average deviation of p-polarization and s-polarization is about 1%.
Design and Optimization of Broadband Polarization Beam Splitter Made from A Wave-Structured Multilayer Film

Peng Hao,Shen Wei-Dong,Yang Chen-Ying,Zhang Yue-Guang,Liu Xu

DOI: https://doi.org/10.7498/aps.63.134212

IF: 0.906

2014-01-01

Acta Physica Sinica

Abstract:Based on the 2D-PC wave multilayer film structure, a method to broaden the bandwidth of polarization beam splitter is proposed, which is composed of two different thickness periodic film stacks. Combined with the evaluation function of polarization splitting characteristic, the particle swarm optimization method is employed to design the optimal structural parameters. A broadband and compact polarization beam splitter is acquired, in which the center wavelength is 565 nm and its working range has achieved 220 nm with the average extinction ratio over 30 dB. In addition, by using the finite difference time domain method, the band structure and transmission spectrum of the wave-structure multilayer film are calculated, the angle sensitivity of the structure is investigated in detail. And we also study the electromagnetic field in the wavy-structure. Simulation results prove that the structure composed of the two different thickness periodic film stacks can avoid the discontinuity of bandgap, and PSO method can accelerate the convergence of the optimization algorithm and extend the bandwidth effectively.
High-Precision Polarizing Beam Splitting System Based on Polarizing Beam Splitter

Luo Jing,Liu Dong,Xu Peituo,Bai Jian,Liu Chong,Wang Kaiwei,Yang Yongying,Tang Peijun,Cheng Zhongtao,Liu Yanyang

DOI: https://doi.org/10.3788/cjl201643.1210001

2016-01-01

Abstract:The poor extinction ratio and polarization cross talk of a general polarizing beam splitter (PBS) promote us to propose a high-precision polarizing beam splitting system,which consists of a PBS and polarizers.The additional polarizers are insert into reflection channel and transmission channel of the PBS,and the transmission axis direction of polarizer is adjusted,which can minimize the polarization cross talk.Both the theoretical calculation and numerical simulation demonstrate that this polarizing beam splitting system can achieve polarization splitting with higher accuracy.The experimental results show that when the intensity ratio of incident light is-47.5 dB,the polarizing beam splitting error caused by a general PBS is 57.3％,while it is 14.3％ after adding polarizer.When the intensity ratio of incident light is 47.8 dB,the polarizing beam splitting error caused by a general PBS is 15.5％,while it is 8.6 ％ after adding polarizer.The proposed polarizing beam splitter system is simple and practical,which can be employed in many polarized optical systems.
An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Qinghuan Xu,Jifang Tao,Chonglei Sun,Jia Zhao,Zuojia Wang,Liuge Du,Chuanning Niu,Xun Li,Weiping Huang

DOI: https://doi.org/10.1016/j.optcom.2019.124424

IF: 2.4

2020-01-01

Optics Communications

Abstract:A high-performance polarizing beam splitter (PBS) is demonstrated by using asymmetrical directional couplers on a 220nm-thick silicon-on-insulator (SOI) photonics platform. The extinction ratio of the PBS with cascaded directional couplers is > 35 dB for both TE and TM polarizations around the central wavelength of 1550 nm. The bandwidths for an extinction ratio of 20 dB and 30 dB are 275 nm and 230 nm, respectively, for TE polarization, as well as > 300 nm and 225 nm, respectively, for TM polarization. The insertion losses for TE polarization are < 0.5 dB with a bandwidth of > 300 nm. The insertion losses for TM polarization are < 1 dB and < 0.5 dB with a bandwidth of 218 nm and 174 nm, respectively.
Research on the Wide-Angle and Broadband 2d Photonic Crystal Polarization Splitter

YY Li,PF Gu,MY Li,H Yan,X Liu

DOI: https://doi.org/10.1163/156939306775777242

2006-01-01

Journal of Electromagnetic Waves and Applications

Abstract:Two novel wide-angle and broadband 2D photonic crystal polarization splitters (PCPS) which are the multilayer wavy films (MWF) structure and arrow-head like structure are designed based on the autocloning method. Plane wave expansion (PWE) method is used to calculate the band structure and explain the reason for the wide-angle and broadband polarization splitting effect. In order to verify the result derived from PWE method, finite-difference time-domain (FDTD) method is employed to test and measure the polarization effect for the MWF structure.
Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Yuan Wenjia,Shen Weidong,Zhang Yueguang,Zheng Xiaowen,Mu Wen,Fang Bo,Yang Chenying,Liu Xu

DOI: https://doi.org/10.3788/AOS201737.0531001

2017-01-01

Acta Optica Sinica

Abstract:A differential phase shift beam splitter with a multi-layer dielectric film structure which is used for a division-of-amplitude photopolarimeter (DOAP) with an operating wavelength of 1064 nm is designed and prepared.The optimal parameters of beam splitter are obtained by analyzing instrument matrix parameters of the DOAP system.The beam splitter sample and its anti-reflection coating on the backside are prepared with the ion beam sputtering (IBS) deposition method.The experimental results are well consistent with the designed value.Comparing with single-layer film beam splitters,this multilayer dielectric film beam splitters possess a wider application,which is not limited by the substrate,layer materials,incident angle,and operating wavelength.
Polarization selective beam splitter used for liquid crystal light valve large screen display

Peifu Gu,Xu Liu,Haifeng Li,Zhidong Zheng,Jinfa Tang

1995-01-01

Abstract:The polarization selective beam splitter system used for a LCLV (liquid crystal light valve) full color image large screen display is a key subject. The function of such system involves both polarizing radiation and separating light beam into three primary colors. The properties of this system have great influence on the brightness, contrast and color distortion of the display system. The polarization selective beam splitter system consists of four polarizers or non-polarizer and three trimming filters. Whole system is immersed in an oil tank. Such a system has good performance, especially high extinction coefficient.
An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

Shisong Luo,Dongning Liu,Jiaquan Kong,Zengkai Shao,Zeru Wu,Pengfei Xu,Guoxuan Zhu,Yi Wang,Lin Liu,Yanfeng Zhang,Yujie Chen,Siyuan Yu

DOI: https://doi.org/10.1364/acpc.2017.s3d.5

2017-01-01

Abstract:An asymmetrical SiNx-based polarization beam splitter at 810 nm are proposed and fabricated in this work. The simulation results show that the extinction ratio of > 20 dB and the insertion loss of < 0.6 dB can be achieved for both transverse-electric (TE) and transverse magnetic (TM) polarizations at 810 nm.
High-reliability infrared broadband thin-film polarizing beam splitter with ZnSe compensation layers

Baojian LIU,Daqi Li,Weibo Duan,Deming Yu,Qing-Yuan Cai,Lin Jiang,YU Tianyan,Haotian Zhang,Yuting Yang,Qiuhui Zhuang,Yu Zheng

DOI: https://doi.org/10.1364/oe.515751

IF: 3.8

2024-03-13

Optics Express

Abstract:Baojian Liu, Daqi Li, Weibo Duan, Deming Yu, Qingyuan Cai, Lin Jiang, Tianyan Yu, Haotian Zhang, Yuting Yang, Qiuhui Zhuang, Yuxiang Zheng Thin-film polarizing beam splitters (PBSs) fulfill a pivotal role in laser beam splitting, modulation, shaping and isolation. In this ... [Opt. Express 32, 10910-10924 (2024)]

optics
Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Tianbao Yu,Jiehui Huang,Nianhua Liu,Jianyi Yang,Qinghua Liao,Xiaoqing Jiang

DOI: https://doi.org/10.1364/ao.49.002168

IF: 1.9

2010-01-01

Applied Optics

Abstract:We propose and simulate a new kind of compact polarizing beam splitter (PBS) based on a photonic crystal ring resonator (PCRR) with complete photonic bandgaps. The two polarized states are separated far enough by resonant and nonresonant coupling between the waveguide modes and the microring modes. Some defect holes are utilized to control the beam propagation. The simulated results obtained by the finite-difference time-domain method show that high transmission (over 95%) is obtained and the polarization separation is realized with a length as short as 3.1 microm. The design of the proposed PBS can be flexible, thanks to the advantages of PCRRs.
Broadband Polarizing Beam Splitter Based on the Form, Birefringence of A Subwavelength Grating in the Quasi-Static Domain

D Yi,YB Yan,HT Liu,S Lu,GF Jin

DOI: https://doi.org/10.1364/ol.29.000754

2004-01-01

Abstract:We propose a novel broadband polarizing beam splitter with a compact sandwich structure that has a subwavelength grating in the quasi-static domain as the filling. The design is based on effective-medium theory an anisotropic thin-film theory, and the performance is investigated with rigorous coupled-wave theory. The design results show that the structure can provide a high polarization extinction ratio in a broad spectral range.
Splitting Arbitrary Polarized Light with a Flat Dielectric Metagrating

Chenying Yang,Hao Luo,Hailan Wang,Junren Wen,Xiao Chen,Tingting Zheng,Yueguang Zhang,Weidong Shen

DOI: https://doi.org/10.1002/adpr.202100282

2022-01-01

Advanced Photonics Research

Abstract:The beam splitter is one of the basic optical components. Traditional beam splitters use bulky cubes or plates to realize beam splitting and thereby can hardly be used in a compact optical system. Recently, the beam splitter based on phase gradient metasurfaces has been proposed to split beam with a compact size. However, it is facing challenges on the efficiency and manufacturability. Herein, a beam splitter based on single-sized flat dielectric metagrating for arbitrary polarizations is proposed. The diffraction efficiency of the fabricated beam splitter reaches as high as 80% for both TM and TE polarizations at peak wavelength. Moreover, it has a broad working wavelength range (455-550 nm) at visible wavelength where the diffraction efficiency is much higher than 60%. Apart from the broadband and high diffraction efficiency, the steering angle can be simply adjusted by varying the periodicity. Splitting light with a flat metagrating enriches the field of flat photonics, opening up new possibilities in applications such as augment reality displays, imaging systems, compact spectrometers, and lidars.
Switchable Polarization Beam Splitter Based on GST-on-Silicon Waveguides

Bohao Zhang,Weiwei Chen,Pengjun Wang,Shixun Dai,Weifeng Jiang,Wei Liang,Hao Lu,Jian Ding,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1109/jphot.2020.2977979

IF: 2.4

2020-01-01

IEEE Photonics Journal

Abstract:A switchable polarization beam splitter utilizing GST-on-silicon waveguides is introduced and comprehensively investigated in this paper. Based on the phase matching and mode hybridization, structural parameters of the presented device are optimized by using the particle swarm optimization algorithm and finite difference time domain method, so that the output fundamental transverse-electric (TE0) and transverse-magnetic (TM0) modes can be switched by controlling the phase state of GST and the device exhibits broad bandwidth, low crosstalk, and high polarization extinction ratio. For the designed device with the amorphous GST, the crosstalk is lower than -23.40 dB and the polarization extinction ratio is larger than 21.35 dB over the C-band. In the case of the crystalline GST, within the C-band, the crosstalk of less than -27.37 dB and the polarization extinction ratio of greater than 21.37 dB are achieved.
A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

Kun Li,Fan Lu,Dalin Liu,Zhijun He

DOI: https://doi.org/10.1364/cleo_at.2014.jw2a.47

2014-01-01

Abstract:A novel polarization and dichroic dual-functional splitter is proposed, with ultra-high polarization splitting ratios >33dB and >36dB for TE- and TM-polarized modes, respectively; and with high wavelength splitting ratios >26dB and >33dB for 650nm and 850nm, respectively.
Thin-film polarizing beam splitters used in liquid crystal projection display

Yi Ding,Peifu Gu,SUN Xu-tao,Zhenrong Zheng,Yueguang Zhang,LI Hai-feng

DOI: https://doi.org/10.3785/j.issn.1008-973X.2009.08.015

2009-01-01

Abstract:In order to improve the energy efficiency and image contrast of liquid crystal display(LCD) projector,a wide-angle and broadband optical thin-film polarizing beam splitter(PBS) was designed.Several thin-film materials was adopted to achieve multi-kinds of Brewster's angles.The number and thickness of the films were optimized to obtain the wide-angle and broadband PBS.Using SF57 and SF2 glasses as prism materials,and TiO 2,Ta 2O 5,Al 2O 3,SiO 2 as film materials,four typical PBS multi-layer designs were given based on the above principle and the automatic Needle design method.The layer number of the optimized thin-film is 50～60,and the incident angle in air for the PBS reaches ±10.5°.The measured results showed that the integrated transmittance of P-polarization was 88.0% and 93.4% respectively at wavelength of 420—460 nm and 460—680 nm as well as that of S-polarization was 0.095% at wavelength of 420—680 nm.The PBS can be applied to F/2.8 optical systems to improve their performance obviously.
Polarization beam splitter based on 2D transmissive grating

Shihao Kang,Bin Zhou,Yongfang Xie,Jin Wang,Wei Jia,Changhe Zhou

DOI: https://doi.org/10.1364/oe.523341

IF: 3.8

2024-05-21

Optics Express

Abstract:Shihao Kang, Bin Zhou, Yongfang Xie, Jin Wang, Wei Jia, Changhe Zhou This paper introduces a two-dimensional transmissive grating polarization beam splitter (PBS) exhibiting exceptional polarization-sensitive ... [Opt. Express 32, 20589-20599 (2024)]

optics
Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Yuxiao Liu,Hongxiang Li,Weiwei Chen,Pengjun Wang,Shixun Dai,Bohao Zhang,Jun Li,Yan Li,Qiang Fu,Tingge Dai,Hui Yu,Jianyi Yang

DOI: https://doi.org/10.1016/j.optcom.2020.126670

IF: 2.4

2021-01-01

Optics Communications

Abstract:In this paper, a polarization beam splitter using a pixelated directional coupler is proposed, designed, and experimentally demonstrated on silicon-on-insulator platform. According to the phase matching, structural parameters for the coupling region consisting of a straight waveguide and a pixelated waveguide are carefully selected by using direct-binary-search optimization algorithm and the finite difference time domain method, and thus the input fundamental transverse-magnetic and transverse-electric modes can be effectively separated from each other in an ultra-compact coupling length. The coupling length of our designed device is only 6 pm. Experimental results reveal that, the measured polarization extinction ratio is greater than 14.22 dB and the corresponding insertion loss is smaller than 1.36 dB within a bandwidth from 1527 to 1580 nm for the fabricated device operating in transverse-electric polarization, while the measured polarization extinction ratio and insertion loss are respectively larger than 14.47 dB and lower than 1.53 dB from 1527 to 1580 nm for the fabricated device operating in transverse-magnetic polarization.
Polarization Beam Splitter Using a Binary Blazed Grating Coupler.

Junbo Feng,Zhiping Zhou

DOI: https://doi.org/10.1364/ol.32.001662

IF: 3.6

2007-01-01

Optics Letters

Abstract:A novel polarization beam splitter using a two-layer grating coupler is proposed and demonstrated. It can directly couple the normally incident light from fiber into two separate waveguides according to their polarization states while splitting them. It realizes high coupling efficiency and a good extinction ratio by using binary blazed grating couplers. The coupling length is less than 14 microm. The extinction ratio is better than 20 dB for both polarizations over a 40 nm wavelength range, and the coupling efficiencies for the two layers are 58% and 50%.

Polarization, Part-Polarization and Non-Polarization Beam Splitters on Substrate of BK7

Polarization Selective Beamsplitter

Design of particular polarization beam splitter

Design of Broadband and Wide-angle Non-polarization Beamsplitter

Design and Optimization of Broadband Polarization Beam Splitter Made from A Wave-Structured Multilayer Film

High-Precision Polarizing Beam Splitting System Based on Polarizing Beam Splitter

An Ultra-Broadband Polarizing Beam Splitter/coupler Using Asymmetric-Waveguides

Research on the Wide-Angle and Broadband 2d Photonic Crystal Polarization Splitter

Design and Preparation of Multilayer Dielectric Beam Splitter for Division-of-Amplitude Photopolarimeter at 1064 nm

Polarization selective beam splitter used for liquid crystal light valve large screen display

An Asymmetrical Sinx-Based Polarization Beam Splitter at 810 Nm

High-reliability infrared broadband thin-film polarizing beam splitter with ZnSe compensation layers

Design of A Compact Polarizing Beam Splitter Based on A Photonic Crystal Ring Resonator with A Triangular Lattice

Broadband Polarizing Beam Splitter Based on the Form, Birefringence of A Subwavelength Grating in the Quasi-Static Domain

Splitting Arbitrary Polarized Light with a Flat Dielectric Metagrating

Switchable Polarization Beam Splitter Based on GST-on-Silicon Waveguides

A novel polarization and dichroic dual-functional splitter with ultra-high splitting ratios

Thin-film polarizing beam splitters used in liquid crystal projection display

Polarization beam splitter based on 2D transmissive grating

Direct-binary-search-optimized Compact Silicon-Based Polarization Beam Splitter Using a Pixelated Directional Coupler

Polarization Beam Splitter Using a Binary Blazed Grating Coupler.