Abstract:Highlights • A high strength GW113 magnesium alloy is developed via bi-directional forging (BDF). • BDF increases strength and ductility simultaneously in the elongated direction. • Texture dominates mechanical properties of the BDFed GW113 alloy. • Non-basal slip especially pyramidal < c + a > slip causes high ductility in the elongated direction. In this work, we successfully fabricate an ultra-high strength Mg-11Gd-3Y-0.5Zr alloy with ultimate tensile strength of 523 MPa and enhanced ductility via cost-effective bi-directional forging (BDF) and subsequent annealing heat treatments. To elucidate the role of BDF and gain a fundamental understanding of the remarkable simultaneous increase of strength and ductility, systematic microstructure characterization and analysis are performed. It is revealed that the double-peak basal texture, with basal poles located at the center of two mutually perpendicular forging directions, serves as an essential factor for the strength–ductility synergy of the Mg-11Gd-3Y-0.5Zr alloy processed with BDF. Roles of the double-peak basal texture in overcoming the strength–ductility trade-off include promoting non-basal slip, increasing ductility, and enlarging the Hall–Petch effect along the sample elongation direction while reducing the extent of anisotropy in critical resolved shear stresses of different slip systems. This study demonstrates that texture engineering is a powerful strategy to control magnesium alloy performance and BDF is a promising processing technique for enhancing mechanical properties of magnesium alloys.

Ductility enhancement in Mg–8.7Gd–4.18Y–0.42Zr magnesium alloy fabricated through extrusion and equal channel angular pressing (EX-ECAP)

Microstructure Evolution and Properties of Mg-9Gd-0.8Al Alloy with Lamellar Phase During Extrusion at Different Temperatures

Evading Strength-Ductility Tradeoff in Mg Alloy via Uniform Microstructure and Unique Texture Modification Induced by Moderate Temperature ECAP

Numerical and Experimental Investigation on Hot Backward Extrusion Process of Mg-Gd-Y-Zn-Zr Magnesium Alloy

Microstructural evolution and mechanical properties of AZ31 Mg alloy fabricated by a novel bifurcation-equal channel angular pressing

Study of strength-ductility and anisotropic behavior of Mg-Gd-Y-Zn-Zr alloy prepared by Equal channel double angular pressing

Effects of extrusion process on microstructure, precipitates and mechanical properties of Mg-Gd-Y-Zr-Ag alloys

Precipitation behaviors and mechanical properties of a solution-treated Mg-Gd-Nd-Zn-Zr alloy during equal-channel angular pressing process

Study on the Effect of the ECAP Deformation on the Organization and Properties of the Extruded Mg-Sn-Al Alloys

A simultaneous enhancement of both strength and ductility by a novel differential-thermal ECAP process in Mg-Sn-Zn-Zr alloy

Microstructure and mechanical properties of the Mg98.5Zn0.5RE1 (RE=Gd and/or Y) alloys processed by equal channel angular pressing

Effect of rotational-die ECAP parameters on microstructure and mechanical properties of Mg97Y2Zn alloys

The Effect of Rotary-Die Equal-Channel Angular Pressing Process on the Microstructure, the Mechanical and Friction Properties of GW103 Alloy

Microstructure evolution, texture and mechanical properties of a Mg–Gd–Y–Zn–Zr alloy fabricated by cyclic expansion extrusion with an asymmetrical extrusion cavity: The influence of passes and processing route

Effect of ECAP on Mechanical and Damping Properties of Mg-0.6%Zr Alloy

Dynamic Recrystallization, Texture Evolution, and Improved Mechanical Properties of Mg-Y-Zn-V Alloy during Forging and Subsequent Extruding Deformation

Microstructure and mechanical properties of Mg-Gd-Zn-Zr alloy after hot extrusion

The improvement of grain refinement, texture modification and mechanical properties of pure Mg prepared by cyclic expansion extrusion with an asymmetric extrusion cavity

Strength–ductility synergy in Mg-Gd-Y-Zr alloys via texture engineering in bi-directional forging

Influence of Extrusion Ratio on Microstructure and Tensile Properties of Mg–Gd–Y–Zn–Zr Alloy

Mechanism of Ductility Enhancement of the Mg-8Gd-4Y-1Nd-0.5Si Alloy by Multi-Directional Forging Process before Extrusion