Abstract:The development of high-performance integrated circuit chips and the shrinkage of feature sizes according to Moore’s law bring forward continuously the requirements for low dielectric constant (low-k) materials with various excellent properties in the back-end-of-the-line (BEOL) interconnect. Porous SiCOH films prepared by plasma enhanced chemical vapor deposition (PECVD) through a porogen approach are widely applied to industry and extensively studied. Thermal annealing is an important process for fabricating the porous low-k films, which has a great influence on film structure as well as properties. SiCOH films are deposited by PECVD using tetraethoxysilane and limonene as precursors, and annealed at 450 ℃ for 1.5 h under nitrogen atmosphere. The evolutions of film structure and properties during thermal annealing are revealed, and the reaction mechanism for structure change is also proposed. Fourier transform inferred spectroscopy and solid state nuclear magnetic resonance results show that the as-deposited film is an organic-inorganic hybrid film composed of various kinds of Si-O-Si, -CHx, Si-O-CH2CH3, etc. The organic component is removed almost completely during thermal annealing, making a porous film with a Si-O-Si inorganic skeleton. The skeleton is also rearranged at the same time. Deconvolution of the Si-O-Si absorption band of the FTIR spectrum reveals that the cage-like Si-O-Si occupies the major part for both as-deposited and annealed films, while the amount of silicon suboxide Si-O-Si decreases and that of network Si-O-Si increases during thermal annealing, making the film more robust. More C=C and Si-C are formed through chemical reactions between Si-H, -CHx and Si-O-CH2-CH3, and crosslinking is further enhanced. Nitrogen adsorption/desorption isothermal measurement reveals that a large number of micropores with diameter less than 2-3 nm are created during thermal annealing, which is consistent with the removal of organic groups and the existence of cage-like Si-O-Si. As a result, both the refractive index and dielectric constant decrease significantly from 1.476 (λ =630 nm) and 3.45 to 1.365 and 2.60, respectively. Because of the increase of C=C after annealing, extinction coefficient and leakage current density increase. Although there is a shrinkage of 14.7% in film thickness and a reduction of mechanical properties after annealing, the Young’s modulus is still larger than 4 GPa. Considering all kinds of properties, the obtained film appears to be a competitive candidate as inter layer dielectrics in the BEOL interconnect of integrated circuits.

Impact of Post-Deposition Annealing on Electrical Properties of RF-Sputtered Cu2O/4H-SiC and NiO/4H-SiC PiN Diodes

Nitridation of Metalorganic-Chemical-VaporDeposited Al 2 O 3 Gate Dielectrics by NH 3 Annealing

The Post-Deposition Anneal Effects On The Electrical Properties Of Hfo2 Gate Dielectric Deposited By Ion Beam Sputtering At Room Temperature

Effects of post-deposition annealing on temperature-dependent electrical characteristics of Ni/(Al0.1Ga0.9)2O3/4H-SiC Schottky barrier diodes

Effect of Gas Annealing on the Electrical Properties of Ni/AlN/SiC

Influence of Annealing Atmosphere on the Characteristics of Ga2O3/4H-SiC n-n Heterojunction Diodes

Effect of post-deposition annealing on electrical properties and structures of aluminum oxide passivation film on a crystalline silicon substrate

Annealing Influence on Stoichiometry and Band Alignment of 4H-SiC/SiO2 Interface Evaluated by X-ray Photoelectron Spectroscopy

Fabrication and Characterization of Oxygenated AlN/4H-SiC Heterojunction Diodes

Tunable Electrical Properties of NiO Thin Films and P-Type Thin-Film Transistors

Annealing effects of In2O3 thin films on electrical properties and application in thin film transistors

Annealing Process Influence And Dopant-Silicide Interaction In Self-Aligned Nisi Technology

Effect of Thermal Annealing on the Structure and Properties of Plasma Enhanced Chemical Vapor Deposited Sicoh Film

Effects of post-deposition annealing on BaTiO3/4H-SiC MOS capacitors using aerosol deposition method

The Effect of Diluted N2O Annealing Time on Gate Dielectric Reliability of SiC Metal-Oxide Semiconductor Capacitors and Characterization of Performance on SiC Metal-Oxide Semiconductor Field Effect Transistor

Interfacial electrical and chemical properties of deposited SiO2 layers in lateral implanted 4H-SiC MOSFETs subjected to different nitridations

Effects of sequential annealing in low oxygen partial-pressure and NO on 4H-SiC MOS devices

Effect of Oxygen-Evaporation-Preventative Post-Annealing Gas Conditions on NiO Thin Films

Morphological and electrical properties of Nickel based Ohmic contacts formed by laser annealing process on n-type 4H-SiC

Post-annealing treatment in improving high dielectric constant MgO-based metal-oxide-semiconductor diodes

Effects of Substrate and Annealing Conditions on the Ferroelectric Properties of Non-Doped HfO2 Deposited by RF Plasma Sputter